This adds a device tree example for SFR NeufBox 6.
Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
---
arch/mips/bmips/Kconfig | 4 +
arch/mips/boot/dts/brcm/Makefile | 2 +
arch/mips/boot/dts/brcm/bcm6362.dtsi | 134 +++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm96362nb6ser.dts | 22 +++++
4 files changed, 162 insertions(+)
create mode 100644 arch/mips/boot/dts/brcm/bcm6362.dtsi
create mode 100644 arch/mips/boot/dts/brcm/bcm96362nb6ser.dts
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index 5b0ad8c..43da496 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -33,6 +33,10 @@ config DT_BCM96358NB4SER
bool "BCM96358NB4SER"
select BUILTIN_DTB
+config DT_BCM96362NB6SER
+ bool "BCM96362NB6SER"
+ select BUILTIN_DTB
+
config DT_BCM96368MVWG
bool "BCM96368MVWG"
select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index c553b95..161e54b 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
dtb-$(CONFIG_DT_BCM963268VR3032U) += bcm963268vr3032u.dtb
dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb
+dtb-$(CONFIG_DT_BCM96362NB6SER) += bcm96362nb6ser.dtb
dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
@@ -20,6 +21,7 @@ dtb-$(CONFIG_DT_NONE) += \
bcm93384wvg_viper.dtb \
bcm963268vr3032u.dtb \
bcm96358nb4ser.dtb \
+ bcm96362nb6ser.dtb \
bcm96368mvwg.dtb \
bcm9ejtagprb.dtb \
bcm97125cbmb.dtb \
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi
b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 0000000..c507da5
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,134 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6362";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_cntl: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x14>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <4>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ leds0: led-controller@10001900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10001900 0x24>;
+
+ status = "disabled";
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm6362-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm6362-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <9>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96362nb6ser.dts
b/arch/mips/boot/dts/brcm/bcm96362nb6ser.dts
new file mode 100644
index 0000000..a470230
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96362nb6ser.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+ compatible = "sfr,nb6-ser", "brcm,bcm6362";
+ model = "SFT NeufBox 6 (Sercomm)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.1.4
