Changes bellow
- FDT setup timing fix.
- chosen/bootargs support.
- zImage support.
- DT binding helper macro.
Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
---
arch/sh/boards/of-generic.c | 23 +++++++++++-----------
arch/sh/boot/compressed/head_32.S | 5 +++--
arch/sh/boot/dts/include/dt-bindings | 1 +
arch/sh/kernel/setup.c | 19 ++++++++++++++++++
include/dt-bindings/interrupt-controller/sh_intc.h | 2 ++
5 files changed, 36 insertions(+), 14 deletions(-)
create mode 120000 arch/sh/boot/dts/include/dt-bindings
create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index bf3a166..9570873 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -112,29 +112,25 @@ static int noopi(void)
return 0;
}
-static void __init sh_of_mem_reserve(void)
+static void __init sh_of_mem_init(void)
{
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
}
-static void __init sh_of_time_init(void)
-{
- pr_info("SH generic board support: scanning for clocksource devices\n");
- clocksource_probe();
-}
-
static void __init sh_of_setup(char **cmdline_p)
{
- unflatten_device_tree();
-
- board_time_init = sh_of_time_init;
+ struct device_node *cpu;
+ int freq;
sh_mv.mv_name = of_flat_dt_get_machine_name();
if (!sh_mv.mv_name)
sh_mv.mv_name = "Unknown SH model";
sh_of_smp_probe();
+ cpu = of_find_node_by_name(NULL, "cpu");
+ if (!of_property_read_u32(cpu, "clock-frequency", &freq))
+ preset_lpj = freq / 500;
}
static int sh_of_irq_demux(int irq)
@@ -167,8 +163,7 @@ static struct sh_machine_vector __initmv sh_of_generic_mv =
{
.mv_init_irq = sh_of_init_irq,
.mv_clk_init = sh_of_clk_init,
.mv_mode_pins = noopi,
- .mv_mem_init = noop,
- .mv_mem_reserve = sh_of_mem_reserve,
+ .mv_mem_init = sh_of_mem_init,
};
struct sh_clk_ops;
@@ -194,3 +189,7 @@ static int __init sh_of_device_init(void)
return 0;
}
arch_initcall_sync(sh_of_device_init);
+
+void intc_finalize(void)
+{
+}
diff --git a/arch/sh/boot/compressed/head_32.S
b/arch/sh/boot/compressed/head_32.S
index 3e15032..cd34377 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -14,7 +14,8 @@ startup:
/* Load initial status register */
mov.l init_sr, r1
ldc r1, sr
-
+ /* Save FDT address */
+ mov r4, r13
/* Move myself to proper location if necessary */
mova 1f, r0
mov.l 1f, r2
@@ -83,7 +84,7 @@ l1:
/* Jump to the start of the decompressed kernel */
mov.l kernel_start_addr, r0
jmp @r0
- nop
+ mov r13,r4
.align 2
bss_start_addr:
diff --git a/arch/sh/boot/dts/include/dt-bindings
b/arch/sh/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/sh/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 5d34605..f6bb105 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -177,7 +177,12 @@ disable:
#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
void calibrate_delay(void)
{
+#ifndef CONFIG_OF
struct clk *clk = clk_get(NULL, "cpu_clk");
+#else
+ struct device_node *cpu = of_find_node_by_name(NULL, "cpu");
+ struct clk *clk = of_clk_get_by_name(cpu, NULL);
+#endif
if (IS_ERR(clk))
panic("Need a sane CPU clock definition!");
@@ -251,7 +256,11 @@ void __ref sh_fdt_init(phys_addr_t dt_phys)
/* Avoid calling an __init function on secondary cpus. */
if (done) return;
+#ifdef CONFIG_USE_BUILTIN_DTB
+ dt_virt = __dtb_start;
+#else
dt_virt = phys_to_virt(dt_phys);
+#endif
if (!dt_virt || !early_init_dt_scan(dt_virt)) {
pr_crit("Error: invalid device tree blob"
@@ -267,8 +276,13 @@ void __ref sh_fdt_init(phys_addr_t dt_phys)
void __init setup_arch(char **cmdline_p)
{
+#ifdef CONFIG_OF
+ unflatten_device_tree();
+#endif
enable_mmu();
+
+#ifndef CONFIG_OF
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
printk(KERN_NOTICE "Boot params:\n"
@@ -290,6 +304,7 @@ void __init setup_arch(char **cmdline_p)
if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
+#endif
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
@@ -312,9 +327,13 @@ void __init setup_arch(char **cmdline_p)
#endif
#endif
+#if !defined(CONFIG_OF) || defined(USE_BUILTIN_DTB)
/* Save unparsed command line copy for /proc/cmdline */
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
+#else
+ *cmdline_p = boot_command_line;
+#endif
parse_early_param();
diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h
b/include/dt-bindings/interrupt-controller/sh_intc.h
new file mode 100644
index 0000000..8c9dcdc
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/sh_intc.h
@@ -0,0 +1,2 @@
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
--
2.7.0
