Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
NOR flash") enabled SPI-NOR device on routers using serial flash only.
However there are also devices with two flash memories:
1) Small SPI attached flash used mostly for booting
2) Bigger NAND used mostly for storing firmware
On such devices we still need SPI-NOR e.g. to access NVRAM data.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++
5 files changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 5087aa8..9cb186e 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -147,3 +147,7 @@
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 1049ab1..8ce39d5 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -90,3 +90,7 @@
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 3a94606..6229ef2 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
};
};
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 791d722..0653e7e 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -131,3 +131,7 @@
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index ace38ef..50cf804 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -113,3 +113,7 @@
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
--
1.8.4.5
