On Sunday, 21. January 2007 20:25, Paolo Ornati wrote:
> On Sun, 21 Jan 2007 11:32:02 -0600
> Robert Hancock <[EMAIL PROTECTED]> wrote:
>
> > It looks like what you're getting is an actual NCQ write timing out.
> > That makes the bisect result not very interesting since obviously it
> > wouldn't have issued any NCQ writes before NCQ support was
> > implemented. Seeing as how it's also an entirely different driver I
> > imagine it's a different problem than what I've been looking at.
> >
> > Maybe that drive just has some issues with NCQ? I would be surprised
> > at that with a Seagate though..
>
> I don't know. It's a two years old ST380817AS.
>
>
> # smartctl -a -d ata /dev/sda
>
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
> Device Model: ST380817AS
> Serial Number: 4MR08EK8
> Firmware Version: 3.42
> User Capacity: 80,026,361,856 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 6
> ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
> Local Time is: Sun Jan 21 20:15:40 2007 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x82) Offline data collection activity
> was completed without error.
> Auto Offline Data Collection: Enabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: ( 430) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection on/off
> support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging support.
> Short self-test routine
> recommended polling time: ( 1) minutes.
> Extended self-test routine
> recommended polling time: ( 47) minutes.
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 059 049 006 Pre-fail Always
> - 215927244
> 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always
> - 0
> 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always
> - 2182
> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
> - 0
> 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always
> - 204305750
> 9 Power_On_Hours 0x0032 097 097 000 Old_age Always
> - 3494
> 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
> - 0
> 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always
> - 2541
> 194 Temperature_Celsius 0x0022 024 040 000 Old_age Always
> - 24 (Lifetime Min/Max 0/15)
> 195 Hardware_ECC_Recovered 0x001a 059 049 000 Old_age Always
> - 215927244
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
> - 1
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
> - 1
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
> - 0
> 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
> - 0
> 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
> - 0
>
> SMART Error Log Version: 1
> ATA Error Count: 12 (device log contains only the most recent five errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 12 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.839 READ DMA
>
> Error 11 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.839 READ DMA
>
> Error 10 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
> c8 00 00 16 9c 34 e1 00 00:03:03.839 READ DMA
>
> Error 9 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
> c8 00 00 16 9c 34 e1 00 00:03:03.843 READ DMA
> c8 00 00 0e 9b 34 e1 00 00:03:03.839 READ DMA
>
> Error 8 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
> c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
> c8 00 00 16 9c 34 e1 00 00:03:03.846 READ DMA
> c8 00 00 0e 9b 34 e1 00 00:03:03.843 READ DMA
> c8 00 00 8e 99 34 e1 00 00:03:03.839 READ DMA
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
(Added myself to CC.)
> 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always
> - 204305750
> 1 Raw_Read_Error_Rate 0x000f 059 049 006 Pre-fail Always
> - 215927244
> 195 Hardware_ECC_Recovered 0x001a 059 049 000 Old_age Always
> - 215927244
Wow! that HDD is really in a bad condition.
Thanks,
Chr.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
