POWER ISA v3 defines a new idle processor core mechanism. In summary,
 a) new instruction named stop is added. This instruction replaces
        instructions like nap, sleep, rvwinkle.
 b) new per thread SPR named PSSCR is added which controls the behavior
        of stop instruction. 
                
PSSCR has following key fields
        Bits 0:3  - Power-Saving Level Status. This field indicates the
        lowest power-saving state the thread entered since stop
        instruction was last executed.
                
        Bit 42 - Enable State Loss                          
        0 - No state is lost irrespective of other fields  
        1 - Allows state loss
                
        Bits 44:47 - Power-Saving Level Limit      
        This limits the power-saving level that can be entered into.
                
        Bits 60:63 - Requested Level              
        Used to specify which power-saving level must be entered on
        executing stop instruction
                
Stop idle states and their properties like name, latency, target
residency, psscr value are exposed via device tree.

This patch series adds support for this new mechanism.

Patches 1-6 are cleanups and code movement.
Patch 7 adds platform specific support for stop and psscr handling.
Patch 8 adds cpuidle driver support.
Patch 9 makes offlined cpu use stop state.

Cc: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
Cc: linux...@vger.kernel.org
Cc: Michael Ellerman <m...@ellerman.id.au>
Cc: Paul Mackerras <pau...@ozlabs.org>
Cc: Michael Neuling <mi...@neuling.org>
Cc: linuxppc-...@lists.ozlabs.org

Shreyas B. Prabhu (9):
  powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header
  powerpc/kvm: make hypervisor state restore a function
  powerpc/powernv: Move idle code usable by multiple hardware to common
    location
  powerpc/powernv: Make power7_powersave_common more generic
  powerpc/powernv: Move idle related macros to cpuidle.h
  powerpc/powernv: set power_save func after the idle states are
    initialized
  powerpc/powernv: Add platform support for stop instruction
  cpuidle/powernv: Add support for POWER ISA v3 idle states
  powerpc/powernv: Use deepest stop state when cpu is offlined

 arch/powerpc/include/asm/cpuidle.h        |  29 ++++
 arch/powerpc/include/asm/cputable.h       |   4 +-
 arch/powerpc/include/asm/exception-64s.h  |  18 +++
 arch/powerpc/include/asm/kvm_book3s_asm.h |   2 +-
 arch/powerpc/include/asm/machdep.h        |   1 +
 arch/powerpc/include/asm/opal-api.h       |  11 +-
 arch/powerpc/include/asm/paca.h           |   4 +
 arch/powerpc/include/asm/ppc-opcode.h     |   4 +
 arch/powerpc/include/asm/processor.h      |   1 +
 arch/powerpc/include/asm/reg.h            |  11 ++
 arch/powerpc/kernel/Makefile              |   2 +
 arch/powerpc/kernel/asm-offsets.c         |   4 +
 arch/powerpc/kernel/exceptions-64s.S      |  29 +---
 arch/powerpc/kernel/idle_power7.S         | 212 +++-------------------------
 arch/powerpc/kernel/idle_power_common.S   | 185 +++++++++++++++++++++++++
 arch/powerpc/kernel/idle_power_stop.S     | 221 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/Kconfig            |   4 +
 arch/powerpc/platforms/powernv/Kconfig    |   1 +
 arch/powerpc/platforms/powernv/idle.c     |  94 +++++++++++--
 arch/powerpc/platforms/powernv/powernv.h  |   1 +
 arch/powerpc/platforms/powernv/setup.c    |   2 +-
 arch/powerpc/platforms/powernv/smp.c      |   4 +-
 drivers/cpuidle/cpuidle-powernv.c         |  57 +++++++-
 23 files changed, 662 insertions(+), 239 deletions(-)
 create mode 100644 arch/powerpc/kernel/idle_power_common.S
 create mode 100644 arch/powerpc/kernel/idle_power_stop.S

-- 
2.1.4

Reply via email to