From: Yunhui Cui <yunhui....@nxp.com>
Add extra info in LUT table to support some special requerments.
Spansion S25FS-S family flash need some special operations.
Signed-off-by: Yunhui Cui <yunhui....@nxp.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 44 +++++++++++++++++++++++++++++++++++++--
include/linux/mtd/spi-nor.h | 4 ++++
2 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c
b/drivers/mtd/spi-nor/fsl-quadspi.c
index 09adaa4..16ebabbd 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -205,6 +205,9 @@
#define SEQID_RDCR 9
#define SEQID_EN4B 10
#define SEQID_BRWR 11
+#define SEQID_RDAR 12
+#define SEQID_WRAR 13
+
#define QUADSPI_MIN_IOMAP SZ_4M
@@ -470,6 +473,28 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
base + QUADSPI_LUT(lut_base));
+ /*
+ * Read any device register.
+ * Used for Spansion S25FS-S family flash only.
+ */
+ lut_base = SEQID_RDAR * 4;
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
+ LUT1(ADDR, PAD1, ADDR24BIT),
+ base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
+ base + QUADSPI_LUT(lut_base + 1));
+
+ /*
+ * Write any device register.
+ * Used for Spansion S25FS-S family flash only.
+ */
+ lut_base = SEQID_WRAR * 4;
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_WRAR) |
+ LUT1(ADDR, PAD1, ADDR24BIT),
+ base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1),
+ base + QUADSPI_LUT(lut_base + 1));
+
fsl_qspi_lock_lut(q);
}
@@ -477,9 +502,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
+ case SPINOR_OP_READ4_1_1_4:
case SPINOR_OP_READ_1_1_4:
case SPINOR_OP_READ_FAST:
+ case SPINOR_OP_READ4_FAST:
return SEQID_READ;
+ case SPINOR_OP_SPANSION_RDAR:
+ return SEQID_RDAR;
+ case SPINOR_OP_SPANSION_WRAR:
+ return SEQID_WRAR;
case SPINOR_OP_WREN:
return SEQID_WREN;
case SPINOR_OP_WRDI:
@@ -491,6 +522,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
case SPINOR_OP_CHIP_ERASE:
return SEQID_CHIP_ERASE;
case SPINOR_OP_PP:
+ case SPINOR_OP_PP_4B:
return SEQID_PP;
case SPINOR_OP_RDID:
return SEQID_RDID;
@@ -830,8 +862,12 @@ static int fsl_qspi_read_reg(struct spi_nor *nor, u8
opcode, u8 *buf, int len)
{
int ret;
struct fsl_qspi *q = nor->priv;
+ u32 to = 0;
+
+ if (opcode == SPINOR_OP_SPANSION_RDAR)
+ memcpy(&to, nor->cmd_buf, 4);
- ret = fsl_qspi_runcmd(q, opcode, 0, len);
+ ret = fsl_qspi_runcmd(q, opcode, to, len);
if (ret)
return ret;
@@ -843,9 +879,13 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8
opcode, u8 *buf, int len)
{
struct fsl_qspi *q = nor->priv;
int ret;
+ u32 to = 0;
+
+ if (opcode == SPINOR_OP_SPANSION_WRAR)
+ memcpy(&to, nor->cmd_buf, 4);
if (!buf) {
- ret = fsl_qspi_runcmd(q, opcode, 0, 1);
+ ret = fsl_qspi_runcmd(q, opcode, to, 1);
if (ret)
return ret;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 3c36113..fd0631b 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -74,6 +74,10 @@
/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
+/* Used for Spansion S25FS-S family flash only. */
+#define SPINOR_OP_SPANSION_RDAR 0x65 /* Read any device register */
+#define SPINOR_OP_SPANSION_WRAR 0x71 /* Write any device register */
+
/* Used for Micron flashes only. */
#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
--
2.1.0.27.g96db324
