On Wed, Jan 17, 2007 at 01:38:35AM +0900, takada wrote:
> You are right. I agree to your comment. These variables are needless.
> I made a patch again.
>
> diff -Narup linux-2.6.19.orig/arch/i386/kernel/cpu/cyrix.c
> linux-2.6.19/arch/i386/kernel/cpu/cyrix.c
> --- linux-2.6.19.orig/arch/i386/kernel/cpu/cyrix.c 2006-11-30
> 06:57:37.000000000 +0900
> +++ linux-2.6.19/arch/i386/kernel/cpu/cyrix.c 2007-01-16 19:55:05.000000000
> +0900
> @@ -161,19 +161,15 @@ static void __cpuinit set_cx86_inc(void)
> static void __cpuinit geode_configure(void)
> {
> unsigned long flags;
> - u8 ccr3, ccr4;
> local_irq_save(flags);
>
> /* Suspend on halt power saving and enable #SUSP pin */
> setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
>
> - ccr3 = getCx86(CX86_CCR3);
> - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */
> + setCx86(CX86_CCR3, (getCx86(CX86_CCR3) & 0x0f) | 0x10); /* Enable */
>
> - ccr4 = getCx86(CX86_CCR4);
> - ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
> -
> - setCx86(CX86_CCR3, ccr3);
> + /* FPU fast, DTE cache, Mem bypass */
> + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x30);
Actually is it possible that the original intent was:
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */ /* enable advanced
register access? */
ccr4 = getCx86(CX86_CCR4);
ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
setCx86(CX86_CCR4, ccr4);
setCx86(CX86_CCR3, ccr3); /* restore ccr3 register */
Seems something similar with ccr3 was taking place elsewhere in the
function.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
