On Mon, Jan 15, 2007 at 06:45:40PM +0000, Alan wrote: > On Mon, 15 Jan 2007 18:16:02 +0100 > Olivier Galibert <[EMAIL PROTECTED]> wrote: > > > sd 0:0:0:0: SCSI error: return code = 0x08000002 > > sda: Current: sense key: Hardware Error > > ASC=0x42 ASCQ=0x0 > > I'll give you a clue: The words "Hardware Error". > > Run a SCSI verify pass on the drive with some drive utilities and see > what happens. If you are lucky it'll just reallocate blocks and decide > the drive is ok, if not well see what the smart data thinks.
Both smart and the internal blade diagnostics say "everything is a-ok with the drive, there hasn't been any error ever except a bunch of corrected ECC ones, and no more than with a similar drive in another working blade". Hence my initial post. "Hardware error" is kinda imprecise, so I was wondering whether it was unexpected controller answer, detected transmission error, block write error, sector not found... Is there a way to have more information? OG. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
