On 04.04.2016 06:24, Paul Gortmaker wrote:
> The Kconfig currently controlling compilation of this code is:
>
> drivers/mfd/Kconfig:config MFD_MAX77693
> drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX77693 PMIC Support"
>
> ...meaning that it currently is not being built as a module by anyone.
>
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
>
> We explicitly disallow a driver unbind, since that doesn't have a
> sensible use case anyway, and it allows us to drop the ".remove"
> code for non-modular drivers.
>
> Since module_init was not in use by this code, the init ordering
> remains unchanged with this commit.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We also delete the MODULE_LICENSE tag etc. since all that information
> was contained at the top of the file in the comments.
>
> Cc: Chanwoo Choi <cw00.c...@samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlow...@samsung.com>
> Cc: Samuel Ortiz <sa...@linux.intel.com>
> Cc: Lee Jones <lee.jo...@linaro.org>
> Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com>
> ---
> drivers/mfd/max77693.c | 34 +++-------------------------------
> 1 file changed, 3 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
> index b83b7a7da1ae..4126a55269d2 100644
> --- a/drivers/mfd/max77693.c
> +++ b/drivers/mfd/max77693.c
> @@ -2,7 +2,7 @@
> * max77693.c - mfd core driver for the MAX 77693
> *
> * Copyright (C) 2012 Samsung Electronics
> - * SangYoung Son <hello....@smasung.com>
> + * SangYoung Son <hello....@samsung.com>
> *
That's good change.
As for the rest, I think the driver can be switch to module. Consumer
(phy-samsung-usb2) support deferred probing. I can prepare and test a
patch for that.
Best regards,
Krzysztof
> * This program is not provided / owned by Maxim Integrated Products.
> *
> @@ -23,7 +23,7 @@
> * This driver is based on max8997.c
> */
>
> -#include <linux/module.h>
> +#include <linux/init.h>
> #include <linux/slab.h>
> #include <linux/i2c.h>
> #include <linux/err.h>
> @@ -309,28 +309,10 @@ err_i2c_haptic:
> return ret;
> }
>
> -static int max77693_i2c_remove(struct i2c_client *i2c)
> -{
> - struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
> -
> - mfd_remove_devices(max77693->dev);
> -
> - regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
> - regmap_del_irq_chip(max77693->irq, max77693->irq_data_chg);
> - regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
> - regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
> -
> - i2c_unregister_device(max77693->i2c_muic);
> - i2c_unregister_device(max77693->i2c_haptic);
> -
> - return 0;
> -}
> -
> static const struct i2c_device_id max77693_i2c_id[] = {
> { "max77693", TYPE_MAX77693 },
> { }
> };
> -MODULE_DEVICE_TABLE(i2c, max77693_i2c_id);
>
> static int max77693_suspend(struct device *dev)
> {
> @@ -374,10 +356,10 @@ static struct i2c_driver max77693_i2c_driver = {
> .driver = {
> .name = "max77693",
> .pm = &max77693_pm,
> + .suppress_bind_attrs = true,
> .of_match_table = of_match_ptr(max77693_dt_match),
> },
> .probe = max77693_i2c_probe,
> - .remove = max77693_i2c_remove,
> .id_table = max77693_i2c_id,
> };
>
> @@ -387,13 +369,3 @@ static int __init max77693_i2c_init(void)
> }
> /* init early so consumer devices can complete system boot */
> subsys_initcall(max77693_i2c_init);
> -
> -static void __exit max77693_i2c_exit(void)
> -{
> - i2c_del_driver(&max77693_i2c_driver);
> -}
> -module_exit(max77693_i2c_exit);
> -
> -MODULE_DESCRIPTION("MAXIM 77693 multi-function core driver");
> -MODULE_AUTHOR("SangYoung, Son <hello....@samsung.com>");
> -MODULE_LICENSE("GPL");
>
