early console in setup code
[    0.000000] Linux version 4.5.0-rc2-00215-g729ed6f (kbuild@lkp-ib03) (gcc version 5.3.1 20160316 (Debian 5.3.1-12) ) #1 SMP Fri Mar 25 08:29:26 CST 2016
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-61/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s5-03250643-729ed6fc971182a09c0869dbf8007ae5e538a04a-20160325-54284-f93eiu-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s5-03250643 branch=linux-devel/devel-spot-201603250547 commit=729ed6fc971182a09c0869dbf8007ae5e538a04a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/vmlinuz-4.5.0-rc2-00215-g729ed6f max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-61::dhcp drbd.minor_co
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [ffff8800000f6630]
[    0.000000]   mpc: f6640-f6718
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x037e2000, 0x037e2fff] PGTABLE
[    0.000000] BRK [0x037e3000, 0x037e3fff] PGTABLE
[    0.000000] BRK [0x037e4000, 0x037e4fff] PGTABLE
[    0.000000] BRK [0x037e5000, 0x037e5fff] PGTABLE
[    0.000000] BRK [0x037e6000, 0x037e6fff] PGTABLE
[    0.000000] BRK [0x037e7000, 0x037e7fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13aa3000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13aa2001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 7446389623 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000]   DMA32 zone: 1280 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 81790 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880013600000 s86208 r0 d32576 u2097152
[    0.000000] pcpu-alloc: s86208 r0 d32576 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1360c680
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 80489
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-61/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s5-03250643-729ed6fc971182a09c0869dbf8007ae5e538a04a-20160325-54284-f93eiu-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s5-03250643 branch=linux-devel/devel-spot-201603250547 commit=729ed6fc971182a09c0869dbf8007ae5e538a04a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/vmlinuz-4.5.0-rc2-00215-g729ed6f max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-61::dhcp drbd.m
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 273128K/327160K available (12539K kernel code, 2318K rwdata, 4768K rodata, 1112K init, 16888K bss, 54032K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] console [ttyS0] enabled
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |failed|failed|failed|failed|
[    0.000000]                   initialize held:failed|failed|failed|failed|failed|failed|
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]   | Wound/wait tests |
[    0.000000]   ---------------------
[    0.000000]                   ww api failures:  ok  |  ok  |failed|
[    0.000000]                ww contexts mixing:failed|failed|
[    0.000000]              finishing ww context:failed|failed|failed|failed|
[    0.000000]                locking mismatches:failed|failed|failed|
[    0.000000]                  EDEADLK handling:  ok  |  ok  |failed|failed|failed|failed|failed|failed|failed|failed|
[    0.000000]            spinlock nest unlocked:failed|
[    0.000000]   -----------------------------------------------------
[    0.000000]                                  |block | try  |context|
[    0.000000]   -----------------------------------------------------
[    0.000000]                           context:failed|  ok  |  ok  |
[    0.000000]                               try:failed|  ok  |failed|
[    0.000000]                             block:failed|  ok  |failed|
[    0.000000]                          spinlock:failed|  ok  |failed|
[    0.000000] --------------------------------------------------------
[    0.000000] 169 out of 253 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.480529] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.481877] pid_max: default: 4096 minimum: 301
[    0.483397] ACPI: Core revision 20160108
[    0.495689] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.501470] 
[    0.501761] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.503822] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.507701] mce: CPU supports 10 MCE banks
[    0.510445] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.513322] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.562580] debug: unmapping init [mem 0xffffffff8275b000-0xffffffff82763fff]
[    0.576180] x2apic enabled
[    0.577030] Switched APIC routing to physical x2apic.
[    0.577985] enabled ExtINT on CPU#0
[    0.592769] ENABLING IO-APIC IRQs
[    0.593355] init IO_APIC IRQs
[    0.593818]  apic 0 pin 0 not connected
[    0.594457] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.595692] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.596895] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.598100] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.599328] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.600607] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.601890] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.603278] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.606687] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.609987] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.625566] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.626925] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.628326] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.629710] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.632020] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.635416]  apic 0 pin 16 not connected
[    0.636028]  apic 0 pin 17 not connected
[    0.638676]  apic 0 pin 18 not connected
[    0.641315]  apic 0 pin 19 not connected
[    0.641937]  apic 0 pin 20 not connected
[    0.644602]  apic 0 pin 21 not connected
[    0.647231]  apic 0 pin 22 not connected
[    0.647845]  apic 0 pin 23 not connected
[    0.650646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.653689] TSC deadline timer enabled
[    0.671224] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    0.672771] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    0.674608] x86: Booted up 1 node, 1 CPUs
[    0.675254] ----------------
[    0.675707] | NMI testsuite:
[    0.676155] --------------------
[    0.676697]   remote IPI:  ok  |
[    0.677284]    local IPI:  ok  |
[    0.677859] --------------------
[    0.678357] Good, all   2 testcases passed! |
[    0.679038] ---------------------------------
[    0.679705] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.693809] devtmpfs: initialized
[    0.695716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.697307] xor: automatically using best checksumming function:
[    0.711633]    avx       : 16684.000 MB/sec
[    0.712540] regulator-dummy: no parameters
[    0.713331] RTC time:  8:29:56, date: 03/25/16
[    0.714239] NET: Registered protocol family 16
[    0.715552] cpuidle: using governor ladder
[    0.716552] ACPI: bus type PCI registered
[    0.717232] PCI: Using configuration type 1 for base access
[    0.793728] raid6: sse2x1   gen()  4480 MB/s
[    0.823433] raid6: sse2x1   xor()  3949 MB/s
[    0.874399] raid6: sse2x2   gen()  6828 MB/s
[    0.909458] raid6: sse2x2   xor()  4654 MB/s
[    0.948754] raid6: sse2x4   gen()  7847 MB/s
[    0.996207] raid6: sse2x4   xor()  5277 MB/s
[    0.996894] raid6: using algorithm sse2x4 gen() 7847 MB/s
[    0.997727] raid6: .... xor() 5277 MB/s, rmw enabled
[    0.998483] raid6: using ssse3x2 recovery algorithm
[    0.999383] ACPI: Added _OSI(Module Device)
[    1.000028] ACPI: Added _OSI(Processor Device)
[    1.000724] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.001478] ACPI: Added _OSI(Processor Aggregator Device)
[    1.021721] ACPI: Interpreter enabled
[    1.022357] ACPI: (supports S0 S3 S5)
[    1.022923] ACPI: Using IOAPIC for interrupt routing
[    1.023783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.055378] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.056324] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    1.057109] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.058329] PCI host bridge to bus 0000:00
[    1.059015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.060132] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.061159] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.062306] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    1.076503] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.077357] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.079118] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.081042] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.097076] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    1.104842] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.106041] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.107070] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.108100] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.109533] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.110978] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.112073] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.122549] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.125618] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.130557] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.152614] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.154132] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.156534] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.172436] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.196163] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.197770] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    1.200191] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    1.202457] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    1.220667] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    1.222426] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    1.242360] pci_bus 0000:00: on NUMA node 0
[    1.244038] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.245220] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.246520] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.247733] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.248821] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.261151] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.262625] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.263504] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.264724] vgaarb: loaded
[    1.265105] vgaarb: bridge control possible 0000:00:02.0
[    1.266572] SCSI subsystem initialized
[    1.267169] ACPI: bus type USB registered
[    1.267864] usbcore: registered new interface driver usbfs
[    1.268761] usbcore: registered new interface driver hub
[    1.269552] usbcore: registered new device driver usb
[    1.273755] pps_core: LinuxPPS API ver. 1 registered
[    1.274520] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.275923] PTP clock support registered
[    1.276562] EDAC MC: Ver: 3.0.0
[    1.277626] PCI: Using ACPI for IRQ routing
[    1.278286] PCI: pci_cache_line_size set to 64 bytes
[    1.279215] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.296010] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    1.297459] NET: Registered protocol family 23
[    1.298257] Bluetooth: Core ver 2.21
[    1.298879] NET: Registered protocol family 31
[    1.299600] Bluetooth: HCI device and connection manager initialized
[    1.300569] Bluetooth: HCI socket layer initialized
[    1.301330] Bluetooth: L2CAP socket layer initialized
[    1.302126] Bluetooth: SCO socket layer initialized
[    1.302895] NET: Registered protocol family 8
[    1.303566] NET: Registered protocol family 20
[    1.304798] clocksource: Switched to clocksource kvm-clock
[    1.307920] Warning: could not register annotated branches stats
[    1.376184] VFS: Disk quotas dquot_6.6.0
[    1.376878] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.378109] pnp: PnP ACPI init
[    1.378737] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.379842] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.380939] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.382004] pnp 00:03: [dma 2]
[    1.382523] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.383602] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.384728] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.386398] pnp: PnP ACPI: found 6 devices
[    1.405422] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.406928] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.407883] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.408825] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.409865] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    1.410967] NET: Registered protocol family 1
[    1.411667] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.412596] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.413501] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.414489] pci 0000:00:02.0: Video device with shadowed ROM
[    1.415427] PCI: CLS 0 bytes, default 64
[    1.416207] Unpacking initramfs...
[    2.208678] debug: unmapping init [mem 0xffff880013aa3000-0xffff880013fdffff]
[    2.224262] cryptomgr_test (21) used greatest stack depth: 15336 bytes left
[    2.231527] AVX2 or AES-NI instructions are not detected.
[    2.232582] AVX2 instructions are not detected.
[    2.233520] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.236536] spin_lock-torture: Creating torture_shuffle task
[    2.237576] spin_lock-torture: Creating torture_stutter task
[    2.238684] spin_lock-torture: torture_shuffle task started
[    2.239568] spin_lock-torture: Creating lock_torture_writer task
[    2.240525] spin_lock-torture: torture_stutter task started
[    2.241389] spin_lock-torture: Creating lock_torture_writer task
[    2.242353] spin_lock-torture: lock_torture_writer task started
[    2.243310] spin_lock-torture: Creating lock_torture_stats task
[    2.244240] spin_lock-torture: lock_torture_writer task started
[    2.246580] futex hash table entries: 16 (order: -2, 1024 bytes)
[    2.247851] spin_lock-torture: lock_torture_stats task started
[    2.249453] Initialise system trusted keyring
[    2.251429] ntfs: driver 2.1.32 [Flags: R/O].
[    2.252446] fuse init (API version 7.24)
[    2.253427] JFS: nTxBlock = 2133, nTxLock = 17070
[    2.255290] SGI XFS with ACLs, security attributes, no debug enabled
[    2.256567] NILFS version 2 loaded
[    2.257469] OCFS2 User DLM kernel interface loaded
[    2.259861] gfs2: GFS2 installed
[    2.281250] NET: Registered protocol family 38
[    2.282091] Key type asymmetric registered
[    2.282732] Asymmetric key parser 'x509' registered
[    2.283487] Key type pkcs7_test registered
[    2.284211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.285486] io scheduler noop registered
[    2.286175] io scheduler deadline registered (default)
[    2.300072] start plist test
[    2.307706] end plist test
[    2.308171] test_string_helpers: Running tests...
[    2.311011] test_hexdump: all 1184 tests passed
[    2.312009] test_firmware: interface ready
[    2.316887] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    2.317886] Test 00:
[    2.330328]   Adding 50000 keys
[    2.407681]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.431903]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.433307]   Deleting 50000 keys
[    2.462617]   Duration of test: 131708781 ns
[    2.463407] Test 01:
[    2.476167]   Adding 50000 keys
[    2.565361]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.589339]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.590633]   Deleting 50000 keys
[    2.620008]   Duration of test: 143316984 ns
[    2.620768] Test 02:
[    2.623298]   Adding 50000 keys
[    2.695961]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.736539]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.737848]   Deleting 50000 keys
[    2.780951]   Duration of test: 157111609 ns
[    2.781828] Test 03:
[    2.784399]   Adding 50000 keys
[    2.844815] Info: encountered resize
[    2.846778]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=1
[    2.895576]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.897038]   Deleting 50000 keys
[    2.927024]   Duration of test: 142045275 ns
[    2.927771] Average test time: 143545662
[    2.928386] Testing concurrent rhashtable access from 10 threads
[    3.220103]   thread[5]: rhashtable_insert_fast failed
[    3.220935]   thread[8]: rhashtable_insert_fast failed
[    3.221723]   thread[9]: rhashtable_insert_fast failed
[    3.235614]   thread[0]: rhashtable_insert_fast failed
[    3.236545] rhashtable_thra (181) used greatest stack depth: 14840 bytes left
[    3.237817] Test failed: thread 0 returned: -12
[    3.238547]   thread[2]: rhashtable_insert_fast failed
[    3.239377]   thread[4]: rhashtable_insert_fast failed
[    3.384465] tsc: Refined TSC clocksource calibration: 2693.506 MHz
[    3.385447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d347b2dd9, max_idle_ns: 440795223616 ns
[    4.606473] Test failed: thread 2 returned: -12
[    4.721730] Test failed: thread 4 returned: -12
[    4.722556] Test failed: thread 5 returned: -12
[    4.774579] Test failed: thread 8 returned: -12
[    4.775349] Test failed: thread 9 returned: -12
[    4.776063] Started 10 threads, 6 failed
[    4.778972] test_printf: all 224 tests passed
[    4.779926] xz_dec_test: module loaded
[    4.790761] xz_dec_test: Create a device node with 'mknod xz_dec_test c 248 0' and write .xz files to it.
[    4.793556] rbtree testing -> 23264 cycles
[    5.801557] augmented rbtree testing -> 35177 cycles
[    7.315739] hgafb: HGA card not detected.
[    7.316403] hgafb: probe of hgafb.0 failed with error -22
[    7.317378] usbcore: registered new interface driver udlfb
[    7.318226] usbcore: registered new interface driver smscufx
[    7.320013] BUG: spinlock bad magic on CPU#0, v86d/194
[    7.320767]  lock: 0xffff88000f763310, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    7.321958] CPU: 0 PID: 194 Comm: v86d Not tainted 4.5.0-rc2-00215-g729ed6f #1
[    7.323088]  ffff88000f763310 ffff88000f773b00 ffffffff815c7dcb 0000000000000000
[    7.324263]  ffff88000f773b20 ffffffff81101808 ffff88000f763310 0000000000000000
[    7.325484]  ffff88000f773b50 ffffffff81101a9f ffff88000f763000 ffff88000f763308
[    7.326688] Call Trace:
[    7.327230]  [<ffffffff815c7dcb>] dump_stack+0x4b/0x70
[    7.328015]  [<ffffffff81101808>] spin_dump+0x78/0xc0
[    7.338512]  [<ffffffff81101a9f>] do_raw_spin_lock+0x1af/0x1e0
[    7.339391]  [<ffffffff81c3a625>] _raw_spin_lock+0x15/0x20
[    7.340204]  [<ffffffff81050e7c>] propagate_tlb_flush+0x2c/0x70
[    7.341166]  [<ffffffff8105160e>] flush_tlb_mm_range+0x3e/0x120
[    7.342037]  [<ffffffff811c88b4>] move_page_tables+0x264/0x630
[    7.342903]  [<ffffffff811eee76>] shift_arg_pages+0xc6/0x1a0
[    7.343729]  [<ffffffff811efb2f>] setup_arg_pages+0x26f/0x280
[    7.344579]  [<ffffffff81248efb>] load_elf_binary+0x44b/0x1210
[    7.345447]  [<ffffffff81247d5f>] ? load_misc_binary+0x2df/0x410
[    7.346329]  [<ffffffff811eed9f>] ? put_arg_page+0x7f/0x90
[    7.347154]  [<ffffffff811ef1b8>] ? copy_strings+0x148/0x3c0
[    7.348099]  [<ffffffff811f097a>] search_binary_handler+0x5a/0xf0
[    7.348995]  [<ffffffff811f1037>] do_execveat_common+0x627/0x800
[    7.349980]  [<ffffffff811f123c>] do_execve+0x2c/0x30
[    7.363803]  [<ffffffff810cecb0>] call_usermodehelper_exec_async+0xf0/0x140
[    7.364811]  [<ffffffff810cebc0>] ? umh_complete+0x40/0x40
[    7.365627]  [<ffffffff81c3b21f>] ret_from_fork+0x3f/0x70
[    7.366462]  [<ffffffff810cebc0>] ? umh_complete+0x40/0x40
[    7.368685] v86d (194) used greatest stack depth: 13480 bytes left
[    7.436720] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-3)
[    7.437735] uvesafb: vbe_init() failed with -22
[    7.438431] uvesafb: probe of uvesafb.0 failed with error -22
[    7.439541] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    7.440635] ACPI: Power Button [PWRF]
[    7.442720] r3964: Philips r3964 Driver $Revision: 1.10 $
[    7.443551] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    7.498290] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.512815] lp: driver loaded but no devices found
[    7.514037] Non-volatile memory driver v1.3
[    7.514680] ppdev: user-space parallel port driver
[    7.515425] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    7.516243] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    7.517654] [drm] Initialized drm 1.1.0 20060810
[    7.519229] usbcore: registered new interface driver udl
[    7.520896] Failed to find cpu0 device node
[    7.521548] Unable to detect cache hierarchy from DT for CPU 0
[    7.534224] loop: module loaded
[    7.548270] nbd: registered device at major 43
[    7.572074] lkdtm: No crash points registered, enable through debugfs
[    7.574241] Loading iSCSI transport class v2.0-870.
[    7.575701] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    7.576759] osst :I: Tape driver with OnStream support version 0.99.4
[    7.576759] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    7.579212] SSFDC read-only Flash Translation layer
[    7.580001] mtdoops: mtd device (mtddev=name/number) must be supplied
[    7.592512] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    7.595235] ftl_cs: FTL header not found.
[    7.597664] HSI/SSI char device loaded
[    7.598262] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[    7.599053] AX.25: 6pack driver, Revision: 0.3.0
[    7.599764] YAM driver version 0.8 by F1OAT/F6FBB
[    7.603275] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    7.603275] baycom_ser_fdx: version 0.10
[    7.606638] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[    7.607534] hdlcdrv: version 0.8
[    7.608042] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    7.608042] baycom_ser_hdx: version 0.10
[    7.623661] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    7.623661] baycom_par: version 0.9
[    7.626975] usbcore: registered new interface driver stir4200
[    7.629257] usbcore: registered new interface driver kingsun-sir
[    7.630236] usbcore: registered new interface driver ksdazzle-sir
[    7.631220] usbcore: registered new interface driver ks959-sir
[    7.633407] aoe: AoE v85 initialised.
[    7.645182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.646223] ehci-pci: EHCI PCI platform driver
[    7.647073] ehci-platform: EHCI generic platform driver
[    7.648026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.649289] ohci-pci: OHCI PCI platform driver
[    7.650041] ohci-platform: OHCI generic platform driver
[    7.651044] driver u132_hcd
[    7.651654] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[    7.652619] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    7.654437] usbcore: registered new interface driver cdc_wdm
[    7.655318] usbcore: registered new interface driver usbtmc
[    7.656181] usbcore: registered new interface driver uas
[    7.670178] usbcore: registered new interface driver usb-storage
[    7.671355] usbcore: registered new interface driver ums-alauda
[    7.672298] usbcore: registered new interface driver ums-cypress
[    7.673253] usbcore: registered new interface driver ums-freecom
[    7.674210] usbcore: registered new interface driver ums-isd200
[    7.675154] usbcore: registered new interface driver ums-jumpshot
[    7.676122] usbcore: registered new interface driver ums-karma
[    7.677157] usbcore: registered new interface driver ums-onetouch
[    7.690983] usbcore: registered new interface driver ums-realtek
[    7.691913] usbcore: registered new interface driver ums-sddr09
[    7.692850] usbcore: registered new interface driver ums-sddr55
[    7.693858] usbcore: registered new interface driver ums-usbat
[    7.695000] usbcore: registered new interface driver mdc800
[    7.695891] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    7.697098] usbcore: registered new interface driver microtekX6
[    7.698109] usbcore: registered new interface driver usbserial
[    7.699126] usbcore: registered new interface driver usbserial_generic
[    7.700240] usbserial: USB Serial support registered for generic
[    7.701270] usbcore: registered new interface driver ark3116
[    7.712067] usbserial: USB Serial support registered for ark3116
[    7.713032] usbcore: registered new interface driver belkin_sa
[    7.714130] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    7.715479] usbcore: registered new interface driver cp210x
[    7.716321] usbserial: USB Serial support registered for cp210x
[    7.717226] usbcore: registered new interface driver cyberjack
[    7.718116] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    7.732095] usbcore: registered new interface driver cypress_m8
[    7.733291] usbserial: USB Serial support registered for DeLorme Earthmate USB
[    7.734514] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[    7.735708] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[    7.736854] usbcore: registered new interface driver usb_debug
[    7.737735] usbserial: USB Serial support registered for debug
[    7.738605] usbcore: registered new interface driver digi_acceleport
[    7.739671] usbserial: USB Serial support registered for Digi 2 port USB adapter
[    7.740784] usbserial: USB Serial support registered for Digi 4 port USB adapter
[    7.741891] usbcore: registered new interface driver io_edgeport
[    7.755395] usbserial: USB Serial support registered for Edgeport 2 port adapter
[    7.756593] usbserial: USB Serial support registered for Edgeport 4 port adapter
[    7.757952] usbserial: USB Serial support registered for Edgeport 8 port adapter
[    7.759113] usbserial: USB Serial support registered for EPiC device
[    7.760209] usbcore: registered new interface driver io_ti
[    7.761156] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[    7.762363] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[    7.763711] usbcore: registered new interface driver f81232
[    7.764533] usbserial: USB Serial support registered for f81232
[    7.765447] usbcore: registered new interface driver ftdi_sio
[    7.767878] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.768971] usbcore: registered new interface driver ipw
[    7.769781] usbserial: USB Serial support registered for IPWireless converter
[    7.770987] usbcore: registered new interface driver ir_usb
[    7.771836] usbserial: USB Serial support registered for IR Dongle
[    7.785811] usbcore: registered new interface driver keyspan
[    7.786712] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    7.787940] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    7.789261] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    7.790320] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    7.791432] usbcore: registered new interface driver keyspan_pda
[    7.792349] usbserial: USB Serial support registered for Keyspan PDA
[    7.793299] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[    7.794510] usbcore: registered new interface driver kl5kusb105
[    7.795552] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[    7.796698] usbcore: registered new interface driver kobil_sct
[    7.797582] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[    7.811885] usbcore: registered new interface driver mct_u232
[    7.812762] usbserial: USB Serial support registered for MCT U232
[    7.813692] usbcore: registered new interface driver metro_usb
[    7.814731] usbserial: USB Serial support registered for Metrologic USB to Serial
[    7.815871] usbcore: registered new interface driver mos7720
[    7.816724] usbserial: USB Serial support registered for Moschip 2 port adapter
[    7.817833] usbcore: registered new interface driver navman
[    7.818675] usbserial: USB Serial support registered for navman
[    7.819749] usbcore: registered new interface driver opticon
[    7.820622] usbserial: USB Serial support registered for opticon
[    7.833909] usbcore: registered new interface driver option
[    7.834795] usbserial: USB Serial support registered for GSM modem (1-port)
[    7.835952] usbcore: registered new interface driver oti6858
[    7.836918] usbserial: USB Serial support registered for oti6858
[    7.838114] usbcore: registered new interface driver pl2303
[    7.839079] usbserial: USB Serial support registered for pl2303
[    7.840086] usbcore: registered new interface driver qcaux
[    7.840927] usbserial: USB Serial support registered for qcaux
[    7.841789] usbcore: registered new interface driver qcserial
[    7.842830] usbserial: USB Serial support registered for Qualcomm USB modem
[    7.843879] usbcore: registered new interface driver quatech2
[    7.844747] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[    7.846007] usbcore: registered new interface driver safe_serial
[    7.851027] usbserial: USB Serial support registered for safe_serial
[    7.852000] usbcore: registered new interface driver sierra
[    7.853062] usbserial: USB Serial support registered for Sierra USB modem
[    7.854137] usbcore: registered new interface driver usb_serial_simple
[    7.855166] usbserial: USB Serial support registered for carelink
[    7.856132] usbserial: USB Serial support registered for zio
[    7.857032] usbserial: USB Serial support registered for funsoft
[    7.858095] usbserial: USB Serial support registered for flashloader
[    7.859109] usbserial: USB Serial support registered for google
[    7.860096] usbserial: USB Serial support registered for vivopay
[    7.861045] usbserial: USB Serial support registered for moto_modem
[    7.861954] usbserial: USB Serial support registered for novatel_gps
[    7.862912] usbserial: USB Serial support registered for hp4x
[    7.876764] usbserial: USB Serial support registered for suunto
[    7.877724] usbserial: USB Serial support registered for siemens_mpi
[    7.878760] usbcore: registered new interface driver spcp8x5
[    7.879688] usbserial: USB Serial support registered for SPCP8x5
[    7.880652] usbcore: registered new interface driver ssu100
[    7.881676] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[    7.883012] usbcore: registered new interface driver symbolserial
[    7.883992] usbserial: USB Serial support registered for symbol
[    7.884938] usbcore: registered new interface driver visor
[    7.885822] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[    7.887019] usbserial: USB Serial support registered for Sony Clie 5.0
[    7.888140] usbserial: USB Serial support registered for Sony Clie 3.5
[    7.902368] usbcore: registered new interface driver wishbone_serial
[    7.903455] usbserial: USB Serial support registered for wishbone_serial
[    7.904529] usbcore: registered new interface driver whiteheat
[    7.905464] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    7.907083] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[    7.908274] usbcore: registered new interface driver xsens_mt
[    7.909199] usbserial: USB Serial support registered for xsens_mt
[    7.910180] usbcore: registered new interface driver adutux
[    7.942486] usbcore: registered new interface driver appledisplay
[    7.956566] usbcore: registered new interface driver cypress_cy7c63
[    7.957587] usbcore: registered new interface driver cytherm
[    7.958514] usbcore: registered new interface driver emi62 - firmware loader
[    7.959609] ftdi_elan: driver ftdi-elan
[    7.960877] usbcore: registered new interface driver ftdi-elan
[    7.961837] usbcore: registered new interface driver idmouse
[    7.962747] usbcore: registered new interface driver iowarrior
[    7.963766] usbcore: registered new interface driver usblcd
[    7.964677] usbcore: registered new interface driver ldusb
[    7.965575] usbcore: registered new interface driver usbled
[    7.966491] usbcore: registered new interface driver legousbtower
[    7.967477] usbcore: registered new interface driver usbtest
[    7.968398] usbcore: registered new interface driver usb_ehset_test
[    7.976223] usbcore: registered new interface driver trancevibrator
[    7.977214] usbcore: registered new interface driver usbsevseg
[    7.978114] usbcore: registered new interface driver yurex
[    7.979126] usbcore: registered new interface driver lvs
[    7.980651] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    7.981732] dummy_hcd dummy_hcd.0: Dummy host controller
[    7.982888] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    7.984841] hub 1-0:1.0: USB hub found
[    7.985458] hub 1-0:1.0: 1 port detected
[    8.000235] udc dummy_udc.0: registering UDC driver [zero]
[    8.001098] zero gadget: adding 'source/sink'/ffff88000e9add88 to config 'source/sink'/ffffffff824f53a0
[    8.002451] zero gadget: super speed source/sink: IN/ep1in-bulk, OUT/ep2out-bulk, ISO-IN/ep3in-iso, ISO-OUT/ep4out-iso
[    8.003969] zero gadget: adding 'loopback'/ffff88000e9b2298 to config 'loopback'/ffffffff824f5480
[    8.005243] zero gadget: super speed loopback: IN/ep1in-bulk, OUT/ep2out-bulk
[    8.006274] zero gadget: Gadget Zero, version: Cinco de Mayo 2008
[    8.007162] zero gadget: zero ready
[    8.007679] dummy_udc dummy_udc.0: This device can perform faster if you connect it to a super-speed port...
[    8.009079] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    8.010141] usbip_core: USB/IP Core v1.0.0
[    8.010911] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    8.026814] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.027593] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.222425] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    8.223756] mousedev: PS/2 mouse device common for all mice
[    8.224636] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[    8.226510] usbcore: registered new interface driver bcm5974
[    8.228078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    8.230070] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    8.245873] usbcore: registered new interface driver xpad
[    8.246995] usbcore: registered new interface driver ati_remote2
[    8.248009] cm109: Keymap for Komunikate KIP1000 phone loaded
[    8.248941] usbcore: registered new interface driver cm109
[    8.249780] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    8.251285] usbcore: registered new interface driver powermate
[    8.253363] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4
[    8.254638] evbug: Connected device: input4 (VirtualPS/2 VMware VMMouse at isa0060/serio1/input1)
[    8.256504] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[    8.258056] evbug: Connected device: input3 (VirtualPS/2 VMware VMMouse at isa0060/serio1/input0)
[    8.259607] usbcore: registered new interface driver yealink
[    8.260499] ideapad_slidebar: DMI does not match
[    8.276658] rtc rtc0: invalid alarm value: 1900-1-26 2022213768:1073741856:0
[    8.277950] rtc-test rtc-test.0: rtc core: registered test as rtc0
[    8.279085] rtc rtc1: invalid alarm value: 1900-1-26 2022213768:1073741856:0
[    8.280304] rtc-test rtc-test.1: rtc core: registered test as rtc1
[    8.281379] i2c /dev entries driver
[    8.282135] usbcore: registered new interface driver i2c-diolan-u2c
[    8.283168] usbcore: registered new interface driver i2c-tiny-usb
[    8.284438] pps pps0: new PPS source ktimer
[    8.285108] pps pps0: ktimer PPS source registered
[    8.285859] pps_ldisc: PPS line discipline registered
[    8.299730] Driver for 1-wire Dallas network protocol.
[    8.300887] usbcore: registered new interface driver DS9490R
[    8.301833] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    8.303241] __power_supply_register: Expected proper parent device for 'test_ac'
[    8.304924] __power_supply_register: Expected proper parent device for 'test_battery'
[    8.306686] __power_supply_register: Expected proper parent device for 'test_usb'
[    8.309397] applesmc: supported laptop not found!
[    8.310137] applesmc: driver init failed (ret=-19)!
[    8.312779] pc87360: PC8736x not detected, module not inserted
[    8.314538] Bluetooth: HCI UART driver ver 2.3
[    8.315276] Bluetooth: HCI UART protocol H4 registered
[    8.330068] Bluetooth: HCI UART protocol BCSP registered
[    8.330907] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.332003] Bluetooth: HCI UART protocol Intel registered
[    8.332908] Bluetooth: HCI UART protocol QCA registered
[    8.333968] usbcore: registered new interface driver bcm203x
[    8.334961] usbcore: registered new interface driver bpa10x
[    8.336010] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    8.337097] sdhci: Secure Digital Host Controller Interface driver
[    8.338128] sdhci: Copyright(c) Pierre Ossman
[    8.338883] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    8.339848] wbsd: Copyright(c) Pierre Ossman
[    8.340691] sdhci-pltfm: SDHCI platform and OF driver helper
[    8.354138] usbcore: registered new interface driver usbhid
[    8.361063] usbhid: USB HID core driver
[    8.367494] NET: Registered protocol family 26
[    8.368216] NET: Registered protocol family 17
[    8.368958] NET: Registered protocol family 15
[    8.369668] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    8.384660] NET: Registered protocol family 5
[    8.385424] NET: Registered protocol family 9
[    8.386110] X25: Linux Version 0.2
[    8.388965] NET: Registered protocol family 6
[    8.389739] NET: Registered protocol family 3
[    8.391491] IrCOMM protocol (Dag Brattli)
[    8.402578] Bluetooth: RFCOMM TTY layer initialized
[    8.403421] Bluetooth: RFCOMM socket layer initialized
[    8.404270] Bluetooth: RFCOMM ver 1.11
[    8.404883] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    8.405851] Bluetooth: HIDP socket layer initialized
[    8.406657] 8021q: 802.1Q VLAN Support v1.8
[    8.407444] 9pnet: Installing 9P2000 support
[    8.408124] NET: Registered protocol family 37
[    8.408899] NET: Registered protocol family 36
[    8.426690] zero gadget: resume
[    8.427193] zero gadget: zero_resume
[    8.427797] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.439444] microcode: CPU0 sig=0x206a1, pf=0x1, revision=0x1
[    8.440564] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.442067] ... APIC ID:      00000000 (0)
[    8.442753] ... APIC VERSION: 01050014
[    8.443463] 0000000000000000000000000000000000000000000000000000000000000000
[    8.444829] 0000000000000000000000000000000000000000000000000000000000000000
[    8.446220] 0000000000000000000000000000000000000000000000000000000000008000
[    8.447710] 
[    8.448022] number of MP IRQ sources: 15.
[    8.448748] number of IO-APIC #0 registers: 24.
[    8.449572] testing the IO APIC.......................
[    8.450525] IO APIC #0......
[    8.451060] .... register #00: 00000000
[    8.464812] .......    : physical APIC id: 00
[    8.465536] .......    : Delivery Type: 0
[    8.466201] .......    : LTS          : 0
[    8.466880] .... register #01: 00170011
[    8.467514] .......     : max redirection entries: 17
[    8.468347] .......     : PRQ implemented: 0
[    8.469056] .......     : IO APIC version: 11
[    8.469771] .... register #02: 00000000
[    8.470418] .......     : arbitration: 00
[    8.471098] .... IRQ redirection table:
[    8.471732] IOAPIC 0:
[    8.472145]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.473369]  pin01, enabled , edge , high, V(31), IRR(0), S(0), physical, D(00), M(0)
[    8.474574]  pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0)
[    8.475785]  pin03, enabled , edge , high, V(33), IRR(0), S(0), physical, D(00), M(0)
[    8.476994]  pin04, disabled, edge , high, V(34), IRR(0), S(0), physical, D(00), M(0)
[    8.478210]  pin05, disabled, level, high, V(35), IRR(0), S(0), physical, D(00), M(0)
[    8.479611]  pin06, enabled , edge , high, V(36), IRR(0), S(0), physical, D(00), M(0)
[    8.493115]  pin07, enabled , edge , high, V(37), IRR(0), S(0), physical, D(00), M(0)
[    8.494314]  pin08, enabled , edge , high, V(38), IRR(0), S(0), physical, D(00), M(0)
[    8.495518]  pin09, enabled , level, high, V(39), IRR(0), S(0), physical, D(00), M(0)
[    8.496719]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), physical, D(00), M(0)
[    8.497916]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), physical, D(00), M(0)
[    8.499143]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), physical, D(00), M(0)
[    8.500348]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), physical, D(00), M(0)
[    8.501549]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), physical, D(00), M(0)
[    8.502752]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), physical, D(00), M(0)
[    8.504039]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.505455]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.506869]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.516374]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.517594]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.518813]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.520029]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.521238]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.522434] IRQ to pin mappings:
[    8.522941] IRQ0 -> 0:2
[    8.523381] IRQ1 -> 0:1
[    8.523816] IRQ3 -> 0:3
[    8.524240] IRQ4 -> 0:4
[    8.535550] IRQ5 -> 0:5
[    8.536065] IRQ6 -> 0:6
[    8.536570] IRQ7 -> 0:7
[    8.537082] IRQ8 -> 0:8
[    8.537585] IRQ9 -> 0:9
[    8.538096] IRQ10 -> 0:10
[    8.538634] IRQ11 -> 0:11
[    8.539180] IRQ12 -> 0:12
[    8.539709] IRQ13 -> 0:13
[    8.540250] IRQ14 -> 0:14
[    8.540779] IRQ15 -> 0:15
[    8.541318] .................................... done.
[    8.542971] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    8.545326] Loading compiled-in X.509 certificates
[    8.546742] Btrfs loaded, assert=on
[    8.560523] BTRFS: selftest: Running btrfs free space cache tests
[    8.561700] BTRFS: selftest: Running extent only tests
[    8.562662] BTRFS: selftest: Running bitmap only tests
[    8.563624] BTRFS: selftest: Running bitmap and extent tests
[    8.564677] BTRFS: selftest: Running space stealing from bitmap to extent
[    8.566233] BTRFS: selftest: Free space cache tests finished
[    8.567223] BTRFS: selftest: Running extent buffer operation tests
[    8.568301] BTRFS: selftest: Running btrfs_split_item tests
[    8.569390] BTRFS: selftest: Running extent I/O tests
[    8.570306] BTRFS: selftest: Running find delalloc tests
[    8.813265] zero gadget: resume
[    8.813851] zero gadget: zero_resume
[    8.814463] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.869807] dummy_udc dummy_udc.0: set_address = 2
[    9.238403] swapper/0 invoked oom-killer: gfp_mask=0x24000c0, order=0, oom_score_adj=0
[    9.244459] swapper/0 cpuset=/ mems_allowed=0
[    9.245158] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc2-00215-g729ed6f #1
[    9.246238]  0000000000010aba ffff88000027bbb8 ffffffff815c7dcb 0000000000000000
[    9.251493]  ffff88000027bbf8 ffffffff811e58fd 0000000000000000 ffff88000027bcf8
[    9.252656]  0000000000010aba ffffffff824104c0 ffffffff82410730 ffff88000f88d760
[    9.253825] Call Trace:
[    9.254196]  [<ffffffff815c7dcb>] dump_stack+0x4b/0x70
[    9.254958]  [<ffffffff811e58fd>] dump_header+0x54/0x1ac
[    9.259893]  [<ffffffff8118b223>] out_of_memory+0x2d3/0x320
[    9.260702]  [<ffffffff811926ed>] __alloc_pages_nodemask+0xefd/0x1110
[    9.261643]  [<ffffffff81186214>] pagecache_get_page+0x1e4/0x580
[    9.267282]  [<ffffffff81514045>] test_find_delalloc+0x75/0x950
[    9.268157]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.269438]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.270698]  [<ffffffff81514bdf>] btrfs_test_extent_io+0x1f/0x110
[    9.274321]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.275638]  [<ffffffff82691642>] init_btrfs_fs+0xf6/0x183
[    9.276447]  [<ffffffff8265c177>] do_one_initcall+0x1bc/0x1d0
[    9.277285]  [<ffffffff810d9c00>] ? parse_args+0x250/0x3c0
[    9.278090]  [<ffffffff8265c31d>] kernel_init_freeable+0x192/0x218
[    9.278994]  [<ffffffff81c34b90>] ? rest_init+0x90/0x90
[    9.287859]  [<ffffffff81c34b9e>] kernel_init+0xe/0xe0
[    9.288649]  [<ffffffff81c3b21f>] ret_from_fork+0x3f/0x70
[    9.289533]  [<ffffffff81c34b90>] ? rest_init+0x90/0x90
[    9.290313] Mem-Info:
[    9.290662] active_anon:0 inactive_anon:0 isolated_anon:0
[    9.290662]  active_file:791 inactive_file:51898 isolated_file:0
[    9.290662]  unevictable:7209 dirty:0 writeback:0 unstable:0
[    9.290662]  slab_reclaimable:0 slab_unreclaimable:0
[    9.290662]  mapped:0 shmem:0 pagetables:0 bounce:0
[    9.290662]  free:516 free_pcp:44 free_cma:0
[    9.303241] DMA32 free:2064kB min:2088kB low:2608kB high:3132kB active_anon:0kB inactive_anon:0kB active_file:3164kB inactive_file:207592kB unevictable:28836kB isolated(anon):0kB isolated(file):0kB present:327160kB managed:273128kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:1328kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:176kB local_pcp:176kB free_cma:0kB writeback_tmp:0kB pages_scanned:1354316 all_unreclaimable? yes
[    9.309860] lowmem_reserve[]: 0 0 0
[    9.310548] DMA32: 2*4kB (UM) 1*8kB (M) 0*16kB 0*32kB 2*64kB (UM) 1*128kB (M) 1*256kB (U) 1*512kB (U) 1*1024kB (M) 0*2048kB 0*4096kB = 2064kB
[    9.312973] 59909 total pagecache pages
[    9.313533] 81790 pages RAM
[    9.313950] 0 pages HighMem/MovableOnly
[    9.314511] 13508 pages reserved
[    9.314991] 0 pages cma reserved
[    9.315638] [ pid ]   uid  tgid total_vm      rss nr_ptes nr_pmds swapents oom_score_adj name
[    9.316890] Kernel panic - not syncing: Out of memory and no killable processes...
[    9.316890] 
[    9.318185] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc2-00215-g729ed6f #1
[    9.319307]  ffff88000027bc08 ffff88000027bb78 ffffffff815c7dcb ffffffff821965e0
[    9.320455]  ffff88000027bbf8 ffffffff81182ed6 ffff880000000008 ffff88000027bc08
[    9.321601]  ffff88000027bba0 ffff88000eafb000 0000000000000000 ffff88000ffa2010
[    9.322783] Call Trace:
[    9.323256]  [<ffffffff815c7dcb>] dump_stack+0x4b/0x70
[    9.326539]  [<ffffffff81182ed6>] panic+0xd4/0x21b
[    9.327375]  [<ffffffff8118b22f>] out_of_memory+0x2df/0x320
[    9.328232]  [<ffffffff811926ed>] __alloc_pages_nodemask+0xefd/0x1110
[    9.329216]  [<ffffffff81186214>] pagecache_get_page+0x1e4/0x580
[    9.330151]  [<ffffffff81514045>] test_find_delalloc+0x75/0x950
[    9.331058]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.332609]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.333935]  [<ffffffff81514bdf>] btrfs_test_extent_io+0x1f/0x110
[    9.334882]  [<ffffffff8269154c>] ? trace_event_define_fields_btrfs_space_reservation+0xe5/0xe5
[    9.336260]  [<ffffffff82691642>] init_btrfs_fs+0xf6/0x183
[    9.337064]  [<ffffffff8265c177>] do_one_initcall+0x1bc/0x1d0
[    9.337917]  [<ffffffff810d9c00>] ? parse_args+0x250/0x3c0
[    9.338716]  [<ffffffff8265c31d>] kernel_init_freeable+0x192/0x218
[    9.341532]  [<ffffffff81c34b90>] ? rest_init+0x90/0x90
[    9.342300]  [<ffffffff81c34b9e>] kernel_init+0xe/0xe0
[    9.343060]  [<ffffffff81c3b21f>] ret_from_fork+0x3f/0x70
[    9.343920]  [<ffffffff81c34b90>] ? rest_init+0x90/0x90
[    9.344710] Kernel Offset: disabled

Elapsed time: 20
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/vmlinuz-4.5.0-rc2-00215-g729ed6f -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-61/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s5-03250643-729ed6fc971182a09c0869dbf8007ae5e538a04a-20160325-54284-f93eiu-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s5-03250643 branch=linux-devel/devel-spot-201603250547 commit=729ed6fc971182a09c0869dbf8007ae5e538a04a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/vmlinuz-4.5.0-rc2-00215-g729ed6f max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s5-03250643/gcc-5/729ed6fc971182a09c0869dbf8007ae5e538a04a/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-61::dhcp drbd.minor_count=8'  -initrd /fs/sdh1/initrd-vm-kbuild-yocto-x86_64-61 -m 320 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdh1/disk0-vm-kbuild-yocto-x86_64-61,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-61 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-61 -daemonize -display none -monitor null 
