On 24/03/16 09:05, Irina Tirdea wrote:
> Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have
> GpioInt automatically") automatically assigns the first ACPI GPIO
> interrupt in client->irq, so we can remove the probing code from
> drivers that use only one interrupt.
>
> Commit 0f0796509c07c1c7 ("iio: remove gpio interrupt probing from drivers
> that use a single interrupt") removes gpio interrupt probing from most
> drivers. This patch cleans the remaining ones.
>
> Signed-off-by: Irina Tirdea <irina.tir...@intel.com>
Applied to the togreg branch of iio.git, initially pushed out as testing
for the autobuilders to play with it.
Thanks. Good to get the last? of these cleaned up.
Jonathan
> ---
> drivers/iio/accel/mxc4005.c | 29 -----------------------------
> drivers/iio/gyro/bmg160_core.c | 28 ----------------------------
> 2 files changed, 57 deletions(-)
>
> diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
> index e72e218..c23f47a 100644
> --- a/drivers/iio/accel/mxc4005.c
> +++ b/drivers/iio/accel/mxc4005.c
> @@ -17,7 +17,6 @@
> #include <linux/i2c.h>
> #include <linux/iio/iio.h>
> #include <linux/acpi.h>
> -#include <linux/gpio/consumer.h>
> #include <linux/regmap.h>
> #include <linux/iio/sysfs.h>
> #include <linux/iio/trigger.h>
> @@ -380,31 +379,6 @@ static const struct iio_trigger_ops mxc4005_trigger_ops
> = {
> .owner = THIS_MODULE,
> };
>
> -static int mxc4005_gpio_probe(struct i2c_client *client,
> - struct mxc4005_data *data)
> -{
> - struct device *dev;
> - struct gpio_desc *gpio;
> - int ret;
> -
> - if (!client)
> - return -EINVAL;
> -
> - dev = &client->dev;
> -
> - gpio = devm_gpiod_get_index(dev, "mxc4005_int", 0, GPIOD_IN);
> - if (IS_ERR(gpio)) {
> - dev_err(dev, "failed to get acpi gpio index\n");
> - return PTR_ERR(gpio);
> - }
> -
> - ret = gpiod_to_irq(gpio);
> -
> - dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> -
> - return ret;
> -}
> -
> static int mxc4005_chip_init(struct mxc4005_data *data)
> {
> int ret;
> @@ -470,9 +444,6 @@ static int mxc4005_probe(struct i2c_client *client,
> return ret;
> }
>
> - if (client->irq < 0)
> - client->irq = mxc4005_gpio_probe(client, data);
> -
> if (client->irq > 0) {
> data->dready_trig = devm_iio_trigger_alloc(&client->dev,
> "%s-dev%d",
> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
> index bbce3b0..822767c 100644
> --- a/drivers/iio/gyro/bmg160_core.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -17,7 +17,6 @@
> #include <linux/delay.h>
> #include <linux/slab.h>
> #include <linux/acpi.h>
> -#include <linux/gpio/consumer.h>
> #include <linux/pm.h>
> #include <linux/pm_runtime.h>
> #include <linux/iio/iio.h>
> @@ -31,7 +30,6 @@
> #include "bmg160.h"
>
> #define BMG160_IRQ_NAME "bmg160_event"
> -#define BMG160_GPIO_NAME "gpio_int"
>
> #define BMG160_REG_CHIP_ID 0x00
> #define BMG160_CHIP_ID_VAL 0x0F
> @@ -955,29 +953,6 @@ static const struct iio_buffer_setup_ops
> bmg160_buffer_setup_ops = {
> .postdisable = bmg160_buffer_postdisable,
> };
>
> -static int bmg160_gpio_probe(struct bmg160_data *data)
> -
> -{
> - struct device *dev;
> - struct gpio_desc *gpio;
> -
> - dev = data->dev;
> -
> - /* data ready gpio interrupt pin */
> - gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
> - if (IS_ERR(gpio)) {
> - dev_err(dev, "acpi gpio get index failed\n");
> - return PTR_ERR(gpio);
> - }
> -
> - data->irq = gpiod_to_irq(gpio);
> -
> - dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio),
> - data->irq);
> -
> - return 0;
> -}
> -
> static const char *bmg160_match_acpi_device(struct device *dev)
> {
> const struct acpi_device_id *id;
> @@ -1022,9 +997,6 @@ int bmg160_core_probe(struct device *dev, struct regmap
> *regmap, int irq,
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &bmg160_info;
>
> - if (data->irq <= 0)
> - bmg160_gpio_probe(data);
> -
> if (data->irq > 0) {
> ret = devm_request_threaded_irq(dev,
> data->irq,
>
