From: Bernhard Bender <bernhard.ben...@bytecmed.com>
3.4.111-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream.
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30
touch screen. Due to a missing delay between the RESET and SET_RATE
commands, the touch screen may become unresponsive during system startup or
driver loading.
According to the DMC documentation, a delay is needed after the RESET
command to allow the chip to complete its internal initialization. As this
delay is not guaranteed, we had a system where the touch screen
occasionally did not send any touch data. There was no other indication of
the problem.
The patch fixes the problem by adding a 150ms delay between the RESET and
SET_RATE commands.
Suggested-by: Jakob Mustafa <jakob.must...@bytecmed.com>
Signed-off-by: Bernhard Bender <bernhard.ben...@bytecmed.com>
Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com>
Signed-off-by: Zefan Li <lize...@huawei.com>
---
drivers/input/touchscreen/usbtouchscreen.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c
b/drivers/input/touchscreen/usbtouchscreen.c
index ce384a4..e57eaf8 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -586,6 +586,9 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
goto err_out;
}
+ /* TSC-25 data sheet specifies a delay after the RESET command */
+ msleep(150);
+
/* set coordinate output rate */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
--
1.9.1
