[PATCH 1/1] arm64: dts: Enable GPIO for Broadcom NS2 SoC

[Yendapally Reddy Dhananjaya Reddy]

This enables the GPIO support for Broadcom NS2 SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.re...@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi 
b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index a510d3a..dbe89d7 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -246,6 +246,15 @@
                        mask = <0xfffffffd>;
                };
 
+               gpio_aon: gpio@65024800 {
+                       compatible = "brcm,iproc-gpio";
+                       reg = <0x65024800 0x50>,
+                             <0x65024008 0x18>;
+                       ngpios = <6>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+               };
+
                gic: interrupt-controller@65210000 {
                        compatible = "arm,gic-400";
                        #interrupt-cells = <3>;
@@ -266,6 +275,16 @@
                        status = "disabled";
                };
 
+               gpio_g: gpio@660a0000 {
+                       compatible = "brcm,iproc-gpio";
+                       reg = <0x660a0000 0x50>;
+                       ngpios = <32>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       interrupt-controller;
+                       interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
                i2c1: i2c@660b0000 {
                        compatible = "brcm,iproc-i2c";
                        reg = <0x660b0000 0x100>;
-- 
2.1.0