On Thu, Feb 25, 2016 at 11:04:47PM +0100, Joachim Eastwood wrote:
> Add binding documentation for NXP LPC1850 GPIO Pin Interrupt (PINT)
> controller.
>
> Signed-off-by: Joachim Eastwood <manab...@gmail.com>
> ---
> .../interrupt-controller/nxp,lpc1850-gpio-pint.txt | 22
> ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt
>
> diff --git
> a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt
>
> b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt
> new file mode 100644
> index 000000000000..dc43f187ebda
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt
> @@ -0,0 +1,22 @@
> +NXP LPC18xx/43xx GPIO Pin Interrupt (PINT) controller
> +
> +Required properties:
> +
> +- compatible : should be "nxp,lpc1850-gpio-pint".
> +- reg : Specifies base physical address and size of the registers.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 2.
> +- interrupts : Specifies the CPU interrupts the controller is connected to.
How many (8?) and what's the ordering?
> +- clocks: Must contain a reference to the functional clock.
> +
> +Example:
> +
> +pint: interrupt-controller@40087000 {
> + compatible = "nxp,lpc1850-gpio-pint";
> + reg = <0x40087000 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <32 33 34 35 36 37 38 39>;
> + clocks = <&ccu1 CLK_CPU_GPIO>;
> +};
> --
> 1.8.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
