Hello, On 3.18.11 the card was functioning OK. On 4.4.3 I get:
1.894086] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) [ 1.894198] HiSax: W6692 driver Rev. 1.18.2.4 [ 1.894364] Found: Dynalink/AsusCom IS64PH, I/O base: 0xd000, irq: 6 [ 1.894490] HiSax: IS64PH config irq:6 I/O:d000 [ 1.894611] W6692: Winbond W6692 version (0): W6692 V00 [ 1.894865] W6692 ISTA=0x0 [ 1.894967] W6692 IMASK=0xFF [ 1.895070] W6692 D_EXIR=0x0 [ 1.895173] W6692 D_EXIM=0xFF [ 1.895277] W6692 D_RSTA=0xA0 [ 1.895384] Winbond 6692: IRQ 6 count 0 [ 1.897842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.932040] Winbond 6692: IRQ 6 count 0 [ 1.932149] Winbond 6692: IRQ(6) getting no interrupts during init 1 [ 1.984031] Winbond 6692: IRQ 6 count 0 [ 1.984139] Winbond 6692: IRQ(6) getting no interrupts during init 2 [ 2.034988] ata1.00: ATA-8: Hitachi HDS721050CLA360, JP2OA50E, max UDMA/133 [ 2.035111] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.048185] Winbond 6692: IRQ 6 count 0 [ 2.048292] Winbond 6692: IRQ(6) getting no interrupts during init 3 [ 2.048592] HiSax: Card Winbond 6692 not installed ! I reserved some IRQs in the BIOS of the box but different IRQ does not solve the issue. Cold boot doesn't help either. Any workarounds? Kind regards, Udo
