early console in setup code
[    0.000000] Linux version 4.5.0-rc5-00004-g7cfe885 (kbuild@lkp-hsx03) (gcc version 5.3.1 20160205 (Debian 5.3.1-8) ) #1 Sat Feb 27 03:37:30 CST 2016
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s3-02261544 branch=linux-devel/devel-hourly-2016022613 commit=7cfe885cfd258695fde078e95b5a4b9ff030ccd0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/vmlinuz-4.5.0-rc5-00004-g7cfe885 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-29::dhcp drbd.minor_count=8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x05ca6000, 0x05ca6fff] PGTABLE
[    0.000000] BRK [0x05ca7000, 0x05ca7fff] PGTABLE
[    0.000000] BRK [0x05ca8000, 0x05ca8fff] PGTABLE
[    0.000000] BRK [0x05ca9000, 0x05ca9fff] PGTABLE
[    0.000000] BRK [0x05caa000, 0x05caafff] PGTABLE
[    0.000000] BRK [0x05cab000, 0x05cabfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14efc000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14efb001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 5787049388 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000]   DMA32 zone: 1260 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 92030 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 3c6f280
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 90749
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s3-02261544 branch=linux-devel/devel-hourly-2016022613 commit=7cfe885cfd258695fde078e95b5a4b9ff030ccd0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/vmlinuz-4.5.0-rc5-00004-g7cfe885 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-29::dhcp drbd.minor_cou
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 257080K/368120K available (29052K kernel code, 9264K rwdata, 12480K rodata, 1976K init, 22184K bss, 111040K reserved, 0K cma-reserved)
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8127 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.094482] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.095234] pid_max: default: 4096 minimum: 301
[    0.095669] ACPI: Core revision 20160108
[    0.098446] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.099042] 
[    0.099218] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.099828] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.100808] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.101281] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.101822] CPU: Intel QEMU Virtual CPU version 2.4.0 (family: 0x6, model: 0x6, stepping: 0x3)
[    0.107889] ftrace: allocating 64513 entries in 253 pages
[    0.178097] Performance Events: Broken PMU hardware detected, using software events only.
[    0.186695] Failed to access perfctr msr (MSR c2 is 0)
[    0.187561] x2apic enabled
[    0.188035] Switched APIC routing to physical x2apic.
[    0.188575] enabled ExtINT on CPU#0
[    0.189498] ENABLING IO-APIC IRQs
[    0.189824] init IO_APIC IRQs
[    0.190093]  apic 0 pin 0 not connected
[    0.190452] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.191154] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.191847] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.192544] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.193234] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.193940] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.194631] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.195378] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.196069] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.196756] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.197450] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.198166] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.198877] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.199581] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.200281] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.200982]  apic 0 pin 16 not connected
[    0.201324]  apic 0 pin 17 not connected
[    0.201682]  apic 0 pin 18 not connected
[    0.202024]  apic 0 pin 19 not connected
[    0.202365]  apic 0 pin 20 not connected
[    0.202715]  apic 0 pin 21 not connected
[    0.203056]  apic 0 pin 22 not connected
[    0.203399]  apic 0 pin 23 not connected
[    0.203884] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.204492] Using local APIC timer interrupts.
[    0.204492] calibrating APIC timer ...
[    0.309660] ... lapic delta = 6250504
[    0.310073] ... PM-Timer delta = 357985
[    0.310469] ... PM-Timer result ok
[    0.310866] ..... delta 6250504
[    0.311182] ..... mult: 268457102
[    0.311518] ..... calibration result: 4000322
[    0.311954] ..... CPU clock speed is 2693.2985 MHz.
[    0.312461] ..... host bus clock speed is 1000.0322 MHz.
[    0.313267] devtmpfs: initialized
[    0.313832] gcov: version magic: 0x3530332a
[    0.316570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.317650] xor: measuring software checksum speed
[    0.357051]    prefetch64-sse: 13271.000 MB/sec
[    0.397055]    generic_sse: 12341.000 MB/sec
[    0.397503] xor: using function: prefetch64-sse (13271.000 MB/sec)
[    0.398127] prandom: seed boundary self test passed
[    0.399115] prandom: 100 self tests passed
[    0.399534] pinctrl core: initialized pinctrl subsystem
[    0.400518] NET: Registered protocol family 16
[    0.401743] cpuidle: using governor ladder
[    0.402724] ACPI: bus type PCI registered
[    0.403205] PCI: Using configuration type 1 for base access
[    0.415563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.481071] raid6: sse2x1   gen()  2954 MB/s
[    0.549078] raid6: sse2x1   xor()  3122 MB/s
[    0.617091] raid6: sse2x2   gen()  3168 MB/s
[    0.685085] raid6: sse2x2   xor()  2768 MB/s
[    0.753084] raid6: sse2x4   gen()  3595 MB/s
[    0.821096] raid6: sse2x4   xor()  2766 MB/s
[    0.821545] raid6: using algorithm sse2x4 gen() 3595 MB/s
[    0.822076] raid6: .... xor() 2766 MB/s, rmw enabled
[    0.822570] raid6: using intx1 recovery algorithm
[    0.823370] ACPI: Added _OSI(Module Device)
[    0.823802] ACPI: Added _OSI(Processor Device)
[    0.824242] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.824711] ACPI: Added _OSI(Processor Aggregator Device)
[    0.827169] ACPI: Interpreter enabled
[    0.827576] ACPI: (supports S0 S3 S5)
[    0.827946] ACPI: Using IOAPIC for interrupt routing
[    0.828459] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.834812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.835439] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.836042] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.837246] PCI host bridge to bus 0000:00
[    0.837681] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.838358] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.839042] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.839785] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    0.840533] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.841126] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.842219] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.843338] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.846276] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.847867] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.848586] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.849238] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.849964] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.850847] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.851759] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.852488] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.853490] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.855480] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.857911] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.862610] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.863579] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.865192] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.866811] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.870543] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.871486] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.872482] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.876728] pci_bus 0000:00: on NUMA node 0
[    0.877888] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.878703] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.879481] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.880262] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.880963] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.882021] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.883169] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.883745] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.884541] vgaarb: loaded
[    0.884815] vgaarb: bridge control possible 0000:00:02.0
[    0.885775] SCSI subsystem initialized
[    0.886215] ACPI: bus type USB registered
[    0.886701] usbcore: registered new interface driver usbfs
[    0.887370] usbcore: registered new interface driver hub
[    0.887983] usbcore: registered new device driver usb
[    0.888647] pps_core: LinuxPPS API ver. 1 registered
[    0.889155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.890066] PTP clock support registered
[    0.890540] EDAC MC: Ver: 3.0.0
[    0.891100] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[    0.891754] wmi: Mapper loaded
[    0.892146] FPGA manager framework
[    0.892518] PCI: Using ACPI for IRQ routing
[    0.892951] PCI: pci_cache_line_size set to 64 bytes
[    0.893558] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.894194] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    0.895038] Bluetooth: Core ver 2.21
[    0.895420] NET: Registered protocol family 31
[    0.895873] Bluetooth: HCI device and connection manager initialized
[    0.896518] Bluetooth: HCI socket layer initialized
[    0.897017] Bluetooth: L2CAP socket layer initialized
[    0.897559] Bluetooth: SCO socket layer initialized
[    0.898067] NET: Registered protocol family 8
[    0.898516] NET: Registered protocol family 20
[    0.898980] nfc: nfc_init: NFC Core ver 0.1
[    0.899431] NET: Registered protocol family 39
[    0.900415] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.901147] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.901696] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.905474] clocksource: Switched to clocksource kvm-clock
[    0.925295] VFS: Disk quotas dquot_6.6.0
[    0.925738] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.926564] pnp: PnP ACPI init
[    0.927014] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.927753] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.928462] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.929186] pnp 00:03: [dma 2]
[    0.929544] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.930288] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.931037] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.932070] pnp: PnP ACPI: found 6 devices
[    0.937491] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.938496] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.939124] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.939744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.940419] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    0.941159] NET: Registered protocol family 2
[    0.941801] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.942522] TCP bind hash table entries: 4096 (order: 6, 262144 bytes)
[    0.943335] TCP: Hash tables configured (established 4096 bind 4096)
[    0.944001] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    0.944624] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    0.945395] NET: Registered protocol family 1
[    0.945857] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.946456] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.947049] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.947688] pci 0000:00:02.0: Video device with shadowed ROM
[    0.948273] PCI: CLS 0 bytes, default 64
[    0.949137] Trying to unpack rootfs image as initramfs...
[    1.480442] debug: unmapping init [mem 0xffff880014efc000-0xffff8800167dffff]
[    1.482585] cryptomgr_test (18) used greatest stack depth: 14960 bytes left
[    1.484073] PCLMULQDQ-NI instructions are not detected.
[    1.484649] AVX or AES-NI instructions are not detected.
[    1.485197] CPU feature 'AVX registers' is not supported.
[    1.485747] CPU feature 'AVX registers' is not supported.
[    1.486286] CPU feature 'AVX registers' is not supported.
[    1.486833] AVX2 or AES-NI instructions are not detected.
[    1.487432] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    1.489173] spin_lock-torture: Creating torture_shuffle task
[    1.489765] spin_lock-torture: Creating torture_stutter task
[    1.490348] spin_lock-torture: torture_shuffle task started
[    1.490917] spin_lock-torture: Creating lock_torture_writer task
[    1.491533] spin_lock-torture: torture_stutter task started
[    1.492095] spin_lock-torture: Creating lock_torture_writer task
[    1.492716] spin_lock-torture: lock_torture_writer task started
[    1.493328] spin_lock-torture: Creating lock_torture_stats task
[    1.493968] spin_lock-torture: lock_torture_writer task started
[    1.494802] futex hash table entries: 16 (order: -2, 1280 bytes)
[    1.495416] audit: initializing netlink subsys (disabled)
[    1.496008] audit: type=2000 audit(1456515537.167:1): initialized
[    1.501182] spin_lock-torture: lock_torture_stats task started
[    2.387334] Initialise system trusted keyring
[    2.392424] DLM installed
[    2.392802] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.393605] ntfs: driver 2.1.32 [Flags: R/W].
[    2.394058] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    2.395271] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.395777] qnx6: QNX6 filesystem 1.0.0 registered.
[    2.396272] fuse init (API version 7.24)
[    2.396779] JFS: nTxBlock = 2008, nTxLock = 16067
[    2.398045] befs: version: 0.9.3
[    2.398463] ocfs2: Registered cluster interface o2cb
[    2.398998] OCFS2 User DLM kernel interface loaded
[    2.399856] gfs2: GFS2 installed
[    2.406204] NET: Registered protocol family 38
[    2.406755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.407498] io scheduler noop registered
[    2.407906] io scheduler cfq registered (default)
[    2.408376] start plist test
[    2.410560] end plist test
[    2.412008] test_hexdump: all 1184 tests passed
[    2.412537] test_firmware: interface ready
[    2.413117] test_printf: all 224 tests passed
[    2.413927] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    2.414441] crc32: self tests passed, processed 225944 bytes in 151395 nsec
[    2.415277] crc32c: CRC_LE_BITS = 64
[    2.415669] crc32c: self tests passed, processed 225944 bytes in 73850 nsec
[    2.433359] crc32_combine: 8373 self tests passed
[    2.450818] crc32c_combine: 8373 self tests passed
[    2.451400] xz_dec_test: module loaded
[    2.451802] xz_dec_test: Create a device node with 'mknod xz_dec_test c 247 0' and write .xz files to it.
[    2.452805] rbtree testing -> 9879 cycles
[    2.849751] augmented rbtree testing -> 12342 cycles
[    3.348647] 104-idi-48 104-idi-48: Unable to lock 104-idi-48 port addresses (0x0-0x8)
[    3.349447] 104-idi-48: probe of 104-idi-48 failed with error -16
[    3.350630] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[    3.351175] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[    3.352033] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    3.352822] vmlfb: initializing
[    3.353276] hgafb: HGA card not detected.
[    3.353703] hgafb: probe of hgafb.0 failed with error -22
[    3.354348] usbcore: registered new interface driver smscufx
[    3.354960] hv_vmbus: registering driver hyperv_fb
[    3.355481] intel_idle: does not run on family 6 model 6
[    3.356034] ipmi message handler version 39.2
[    3.356497] IPMI System Interface driver.
[    3.356970] ipmi_si: Unable to find any System Interface(s)
[    3.357548] IPMI SSIF Interface driver
[    3.357962] IPMI Watchdog: driver initialized
[    3.358410] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    3.359280] GHES: HEST is not enabled!
[    3.359707] xenfs: not registering filesystem on non-xen platform
[    3.360604] tsc: Refined TSC clocksource calibration: 2693.506 MHz
[    3.361223] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d347b2dd9, max_idle_ns: 440795223616 ns
[    3.410767] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.435273] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.437839] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    3.438565] ac.o: No PCI boards found.
[    3.438944] ac.o: For an ISA board you must supply memory and irq parameters.
[    3.439818] Non-volatile memory driver v1.3
[    3.440266] ppdev: user-space parallel port driver
[    3.440767] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    3.441278] Linux agpgart interface v0.103
[    3.441795] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.442861] [drm] Initialized drm 1.1.0 20060810
[    3.443368] [drm] radeon kernel modesetting enabled.
[    3.444820] parport_pc 00:04: reported by Plug and Play ACPI
[    3.445564] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.542019] Failed to find cpu0 device node
[    3.542457] Unable to detect cache hierarchy from DT for CPU 0
[    3.548483] brd: module loaded
[    3.550850] loop: module loaded
[    3.551727] nbd: registered device at major 43
[    3.554359] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    3.555058] dummy-irq: no IRQ given.  Use irq=N
[    3.555553] lkdtm: No crash points registered, enable through debugfs
[    3.556231] Phantom Linux Driver, version n0.9.8, init OK
[    3.556951] Guest personality initialized and is inactive
[    3.557562] VMCI host device registered (name=vmci, major=10, minor=57)
[    3.558231] Initialized host personality
[    3.558681] usbcore: registered new interface driver rtsx_usb
[    3.559457] usbcore: registered new interface driver viperboard
[    3.560266] Uniform Multi-Platform E-IDE driver
[    3.560929] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    3.561661] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    3.562722]     ide0: BM-DMA at 0xc040-0xc047
[    3.563175]     ide1: BM-DMA at 0xc048-0xc04f
[    3.563623] Probing IDE interface ide0...
[    4.157473] Probing IDE interface ide1...
[    4.912585] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    5.600643] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    5.601368] hdc: MWDMA2 mode selected
[    5.601905] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.602408] ide1 at 0x170-0x177,0x376 on irq 15
[    5.606066] ide-cd driver 5.00
[    5.606681] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[    5.607332] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.608878] Loading iSCSI transport class v2.0-870.
[    5.609898] rdac: device handler registered
[    5.610428] emc: device handler registered
[    5.610878] alua: device handler registered
[    5.611300] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    5.611990] SCSI Media Changer driver v0.25 
[    5.612666] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    5.613683] slram: not enough parameters.
[    5.614095] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    5.614842] pmc551: not detected
[    5.615234] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.616203] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.617165] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.618139] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.619105] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.620059] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    5.621010] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[    5.621670] nand: Toshiba NAND 128MiB 1,8V 8-bit
[    5.622160] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    5.622920] flash size: 128 MiB
[    5.623239] page size: 512 bytes
[    5.623577] OOB area size: 16 bytes
[    5.623924] sector size: 16 KiB
[    5.624237] pages number: 262144
[    5.624563] pages per sector: 32
[    5.624885] bus width: 8
[    5.625142] bits in sector size: 14
[    5.625511] bits in page size: 9
[    5.625876] bits in OOB size: 4
[    5.626201] flash size with OOB: 135168 KiB
[    5.626634] page address bytes: 4
[    5.626975] sector address bytes: 3
[    5.627334] options: 0x42
[    5.628395] Scanning device for bad blocks
[    5.648159] ftl_cs: FTL header not found.
[    5.648591] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    5.649199] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[    5.650221] ftl_cs: FTL header not found.
[    5.650703] HSI/SSI char device loaded
[    5.651743] libphy: Fixed MDIO Bus: probed
[    5.652250] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    5.653171] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    5.654052] vcan: Virtual CAN interface driver
[    5.654528] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.655226] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.720838] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    6.064730] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    6.065495] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    6.066256] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    6.066872] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    6.067520] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    6.068243] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.068856] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    6.069630] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    6.070318] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    6.070318] baycom_ser_fdx: version 0.10
[    6.071892] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[    6.072470] hdlcdrv: version 0.8
[    6.072832] PPP generic driver version 2.4.2
[    6.073367] PPP Deflate Compression module registered
[    6.073923] PPP MPPE Compression module registered
[    6.074426] NET: Registered protocol family 24
[    6.074910] PPTP driver version 0.8.5
[    6.075457] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[    6.076138] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[    6.076857] usbcore: registered new interface driver kaweth
[    6.077450] usbcore: registered new interface driver rtl8150
[    6.078067] usbcore: registered new interface driver lan78xx
[    6.078681] usbcore: registered new interface driver ipheth
[    6.079258] hv_vmbus: registering driver hv_netvsc
[    6.079769] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    6.080853] Madge ATM Horizon [Ultra] driver version 1.2.1
[    6.081401] hrz: debug bitmap is 0
[    6.081791] idt77252_init: at ffffffff84593d90
[    6.082255] Solos PCI Driver Version 1.04
[    6.082686] adummy: version 1.0
[    6.083110] Fusion MPT base driver 3.04.20
[    6.083562] Copyright (c) 1999-2008 LSI Corporation
[    6.084062] Fusion MPT SPI Host driver 3.04.20
[    6.084545] Fusion MPT misc device (ioctl) driver 3.04.20
[    6.085183] mptctl: Registered with Fusion MPT base driver
[    6.085756] mptctl: /dev/mptctl @ (major,minor=10,220)
[    6.086606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.087267] ehci-pci: EHCI PCI platform driver
[    6.087767] ehci-platform: EHCI generic platform driver
[    6.088344] uhci_hcd: USB Universal Host Controller Interface driver
[    6.089025] driver u132_hcd
[    6.089376] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[    6.089975] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    6.090905] usbcore: registered new interface driver cdc_wdm
[    6.091489] usbcore: registered new interface driver usbtmc
[    6.092087] usbcore: registered new interface driver uas
[    6.092665] usbcore: registered new interface driver usb-storage
[    6.093297] usbcore: registered new interface driver ums-alauda
[    6.093942] usbcore: registered new interface driver ums-datafab
[    6.094586] usbcore: registered new interface driver ums_eneub6250
[    6.095232] usbcore: registered new interface driver ums-freecom
[    6.095872] usbcore: registered new interface driver ums-isd200
[    6.096497] usbcore: registered new interface driver ums-karma
[    6.097118] usbcore: registered new interface driver ums-realtek
[    6.097767] usbcore: registered new interface driver ums-sddr09
[    6.098391] usbcore: registered new interface driver ums-sddr55
[    6.099022] usbcore: registered new interface driver mdc800
[    6.099604] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    6.100436] usbcore: registered new interface driver appledisplay
[    6.101090] usbcore: registered new interface driver cypress_cy7c63
[    6.101770] usbcore: registered new interface driver cytherm
[    6.102372] usbcore: registered new interface driver emi26 - firmware loader
[    6.103115] usbcore: registered new interface driver emi62 - firmware loader
[    6.103881] ftdi_elan: driver ftdi-elan
[    6.104398] usbcore: registered new interface driver ftdi-elan
[    6.105078] usbcore: registered new interface driver isight_firmware
[    6.105800] usbcore: registered new interface driver usblcd
[    6.106375] usbcore: registered new interface driver legousbtower
[    6.107035] usbcore: registered new interface driver rio500
[    6.107642] usbcore: registered new interface driver yurex
[    6.108269] usbcore: registered new interface driver sisusb
[    6.108854] usbcore: registered new interface driver lvs
[    6.109402] usbcore: registered new interface driver cxacru
[    6.110054] usbcore: registered new interface driver ueagle-atm
[    6.110657] xusbatm: malformed module parameters
[    6.111354] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    6.112123] dummy_hcd dummy_hcd.0: Dummy host controller
[    6.112807] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    6.113976] hub 1-0:1.0: USB hub found
[    6.114403] hub 1-0:1.0: 1 port detected
[    6.115353] udc dummy_udc.0: registering UDC driver [g_ether]
[    6.115977] using random self ethernet address
[    6.116439] using random host ethernet address
[    6.117062] usb0: HOST MAC be:84:11:4f:4c:d9
[    6.117540] usb0: MAC 2e:19:76:22:0a:77
[    6.117948] using random self ethernet address
[    6.118408] using random host ethernet address
[    6.118875] g_ether gadget: adding config #2 'RNDIS'/ffffffff84205880
[    6.119562] rndis_register: configNr = 0
[    6.119973] g_ether gadget: adding 'rndis'/ffff88000af2ba00 to config 'RNDIS'/ffffffff84205880
[    6.120854] rndis_set_param_medium: 0 0
[    6.121253] g_ether gadget: RNDIS: super speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int
[    6.122127] g_ether gadget: cfg 2/ffffffff84205880 speeds: super high full
[    6.122837] g_ether gadget:   interface 0 = rndis/ffff88000af2ba00
[    6.123463] g_ether gadget:   interface 1 = rndis/ffff88000af2ba00
[    6.124093] g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/ffffffff842057a0
[    6.124874] g_ether gadget: adding 'cdc_ethernet'/ffff88000af2b800 to config 'CDC Ethernet (ECM)'/ffffffff842057a0
[    6.125932] g_ether gadget: CDC Ethernet: super speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int
[    6.126862] g_ether gadget: cfg 1/ffffffff842057a0 speeds: super high full
[    6.127560] g_ether gadget:   interface 0 = cdc_ethernet/ffff88000af2b800
[    6.128248] g_ether gadget:   interface 1 = cdc_ethernet/ffff88000af2b800
[    6.128949] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    6.129631] g_ether gadget: g_ether ready
[    6.130048] dummy_udc dummy_udc.0: This device can perform faster if you connect it to a super-speed port...
[    6.131053] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    6.131704] usbip_core: usbip_core_init:761: USB/IP Core v1.0.0
[    6.132344] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    6.133876] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.134383] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.135002] hv_vmbus: registering driver hyperv_keyboard
[    6.135833] usbcore: registered new interface driver gtco
[    6.136394] usbcore: registered new interface driver hanwang
[    6.137223] usbcore: registered new interface driver usbtouchscreen
[    6.138113] rtc_cmos 00:00: RTC can wake from S4
[    6.138760] rtc rtc0: alarm rollover: day
[    6.139251] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    6.139994] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    6.141186] rtc rtc1: alarm rollover: day
[    6.141610] rtc rtc1: invalid alarm value: 1900-1-27 2022213768:1073741856:0
[    6.142362] rtc-test rtc-test.0: rtc core: registered test as rtc1
[    6.143054] rtc rtc2: alarm rollover: day
[    6.143465] rtc rtc2: invalid alarm value: 1900-1-27 2022213768:1073741856:0
[    6.144197] rtc-test rtc-test.1: rtc core: registered test as rtc2
[    6.144880] i2c /dev entries driver
[    6.211523] ACPI: No IRQ available for PCI Interrupt Link [LNKS]. Try pci=noacpi or acpi=off
[    6.212398] piix4_smbus 0000:00:01.3: PCI INT A: no GSI
[    6.212987] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    6.214301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    6.215287] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    6.216046] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    6.337805] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    6.338799] pps pps0: new PPS source ktimer
[    6.339224] pps pps0: ktimer PPS source registered
[    6.339727] Driver for 1-wire Dallas network protocol.
[    6.340304] usbcore: registered new interface driver DS9490R
[    6.340883] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    6.341551] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    6.342424] __power_supply_register: Expected proper parent device for 'test_ac'
[    6.343207] power_supply test_ac: uevent
[    6.343610] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    6.344182] __power_supply_register: Expected proper parent device for 'test_battery'
[    6.345025] power_supply test_battery: uevent
[    6.345464] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    6.346181] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[    6.347000] __power_supply_register: Expected proper parent device for 'test_usb'
[    6.347783] power_supply test_usb: uevent
[    6.348201] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    6.353596] power_supply test_ac: power_supply_changed
[    6.354155] power_supply test_ac: power_supply_changed_work
[    6.354722] power_supply test_ac: power_supply_update_gen_leds 1
[    6.355322] power_supply test_ac: uevent
[    6.355723] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    6.356276] power_supply test_ac: prop ONLINE=1
[    6.367859] power_supply test_usb: power_supply_changed
[    6.368394] power_supply test_battery: power_supply_changed
[    6.368998] power_supply test_usb: power_supply_changed_work
[    6.369589] power_supply test_usb: power_supply_update_gen_leds 1
[    6.370213] power_supply test_usb: uevent
[    6.370622] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    6.371249] power_supply test_usb: prop ONLINE=1
[    6.371726] g_ether gadget: resume
[    6.372071] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    6.372740] power_supply test_battery: power_supply_changed_work
[    6.373342] power_supply test_battery: power_supply_update_bat_leds 2
[    6.373994] power_supply test_battery: uevent
[    6.374432] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    6.375076] power_supply test_battery: prop STATUS=Discharging
[    6.375667] power_supply test_battery: prop CHARGE_TYPE=Fast
[    6.376232] power_supply test_battery: prop HEALTH=Good
[    6.376756] power_supply test_battery: prop PRESENT=1
[    6.377258] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    6.377839] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    6.378451] power_supply test_battery: prop CHARGE_FULL=100
[    6.379019] power_supply test_battery: prop CHARGE_NOW=50
[    6.379558] power_supply test_battery: prop CAPACITY=50
[    6.380080] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    6.380702] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    6.381315] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    6.381929] power_supply test_battery: prop MODEL_NAME=Test battery
[    6.382557] power_supply test_battery: prop MANUFACTURER=Linux
[    6.383135] power_supply test_battery: prop SERIAL_NUMBER=4.5.0-rc5-00004-g7cfe885
[    6.383887] power_supply test_battery: prop TEMP=26
[    6.384372] power_supply test_battery: prop VOLTAGE_NOW=3300
[    6.425550] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    6.485592] g_ether gadget: resume
[    6.485953] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    6.545549] dummy_udc dummy_udc.0: set_address = 2
[    6.621557] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[    6.622210] g_ether gadget: reset ecm control 0
[    6.622671] g_ether gadget: init ecm ctrl 0
[    6.623094] dummy_udc dummy_udc.0: enabled ep5in-int (ep5in-intr) maxpacket 16 stream disabled
[    6.623954] g_ether gadget: init ecm
[    6.624315] g_ether gadget: notify connect false
[    6.624784] g_ether gadget: notify speed 425984000
[    6.929618] applesmc: supported laptop not found!
[    6.930113] applesmc: driver init failed (ret=-19)!
[    7.876964] pc87360: PC8736x not detected, module not inserted
[    8.088668] intel_powerclamp: Intel powerclamp does not run on family 6 model 6
[    8.089418] md: linear personality registered for level -1
[    8.093727] md: raid6 personality registered for level 6
[    8.094266] md: raid5 personality registered for level 5
[    8.094804] md: raid4 personality registered for level 4
[    8.095332] md: multipath personality registered for level -4
[    8.095911] md: faulty personality registered for level -5
[    8.096458] md-cluster: EXPERIMENTAL. Use with caution
[    8.096981] Registering Cluster MD functions
[    8.097493] Bluetooth: Virtual HCI driver ver 1.5
[    8.098077] usbcore: registered new interface driver bcm203x
[    8.098678] usbcore: registered new interface driver bfusb
[    8.099252] usbcore: registered new interface driver btusb
[    8.099829] usbcore: registered new interface driver ath3k
[    8.100474] CAPI 2.0 started up with major 68 (no middleware)
[    8.101064] Modular ISDN core version 1.1.29
[    8.101585] NET: Registered protocol family 34
[    8.102053] DSP module 2.0
[    8.102333] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies.
[    8.104153] mISDN: Layer-1-over-IP driver Rev. 2.00
[    8.104814] 0 virtual devices registered
[    8.105210] mISDN: HFC-multi driver 2.03
[    8.105669] usbcore: registered new interface driver HFC-S_USB
[    8.106264] AVM Fritz PCI driver Rev. 2.3
[    8.106693] Winbond W6692 PCI driver Rev. 2.0
[    8.107149] mISDNipac module version 2.0
[    8.107554] EDAC DEBUG: i5000_init: MC:
[    8.107978] EDAC DEBUG: i5400_init: MC:
[    8.108388] EDAC DEBUG: i7300_init: 
[    8.108805] EDAC DEBUG: i82975x_init: i82975x pci_get_device fail
[    8.109446] EDAC DEBUG: i3000_init: i3000 pci_get_device fail
[    8.117784] ledtrig-cpu: registered to indicate activity on CPUs
[    8.130561] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.131769] usbcore: registered new interface driver usbkbd
[    8.258977] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    8.259713] usbcore: registered new interface driver r8712u
[    8.260491] no options.
[    8.260913] usbcore: registered new interface driver gdm_wimax
[    8.261851] dell_wmi_aio: No known WMI GUID found
[    8.262336] acerhdf: error getting hardware information
[    8.263171] fujitsu_laptop: driver 0.6.0 successfully loaded
[    8.263895] alienware_wmi: alienware-wmi: No known WMI GUID found
[    8.264631] hv_vmbus: registering driver hv_balloon
[    8.266391] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[    8.267024] Software Queue-Pair Transport over NTB, version 4
[    8.267698] intel_rapl: driver does not support CPU family 6 model 6
[    8.268637] drop_monitor: Initializing network drop monitor service
[    8.269328] NET: Registered protocol family 26
[    8.269985] netem: version 1.3
[    8.270313] u32 classifier
[    8.270595]     input device check on
[    8.271057] gre: GRE over IPv4 demultiplexor driver
[    8.271555] IPv4 over IPsec tunneling driver
[    8.272188] Initializing XFRM netlink socket
[    8.272644] NET: Registered protocol family 17
[    8.273102] NET: Registered protocol family 15
[    8.273587] NET: Registered protocol family 4
[    8.274063] NET: Registered protocol family 5
[    8.275045] NET: Registered protocol family 6
[    8.276797] NET: Registered protocol family 11
[    8.277275] NET: Registered protocol family 3
[    8.277769] can: controller area network core (rev 20120528 abi 9)
[    8.278401] NET: Registered protocol family 29
[    8.278854] can: raw protocol (rev 20120528)
[    8.279295] can: broadcast manager protocol (rev 20120528 t)
[    8.279873] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[    8.280370] Bluetooth: CMTP socket layer initialized
[    8.280873] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    8.281460] Bluetooth: HIDP socket layer initialized
[    8.281986] lec:lane_module_init: lec.c: initialized
[    8.282489] mpoa:atm_mpoa_init: mpc.c: initialized
[    8.282976] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[    8.283790] DECnet: Routing cache hash table of 256 buckets, 16Kbytes
[    8.284452] NET: Registered protocol family 12
[    8.285329] sctp: Hash tables configured (bind 1024)
[    8.285893] lib80211: common routines for IEEE802.11 drivers
[    8.286467] lib80211_crypt: registered algorithm 'NULL'
[    8.286992] lib80211_crypt: registered algorithm 'WEP'
[    8.287505] lib80211_crypt: registered algorithm 'CCMP'
[    8.288030] lib80211_crypt: registered algorithm 'TKIP'
[    8.288555] tipc: Activated (version 2.0.0)
[    8.288983] NET: Registered protocol family 30
[    8.289539] tipc: Started in single node mode
[    8.289997] 9pnet: Installing 9P2000 support
[    8.290472] Key type dns_resolver registered
[    8.290919] Key type ceph registered
[    8.291318] libceph: loaded (mon/osd proto 15/24)
[    8.291872] batman_adv: B.A.T.M.A.N. advanced 2016.0 (compatibility version 15) loaded
[    8.292667] openvswitch: Open vSwitch switching datapath
[    8.293319] NET: Registered protocol family 40
[    8.293782] mpls_gso: MPLS GSO support
[    8.294794] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
[    8.295406] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.296311] ... APIC ID:      00000000 (0)
[    8.296728] ... APIC VERSION: 01050014
[    8.297166] 0000000000000000000000000000000000000000000000000000000000000000
[    8.297978] 0000000000000000000000000000000000000000000000000000000000000000
[    8.298778] 0000000000000000000000000000000000000000000000000000000000008000
[    8.299587] 
[    8.299788] number of MP IRQ sources: 15.
[    8.300190] number of IO-APIC #0 registers: 24.
[    8.300643] testing the IO APIC.......................
[    8.301158] IO APIC #0......
[    8.301450] .... register #00: 00000000
[    8.301846] .......    : physical APIC id: 00
[    8.302281] .......    : Delivery Type: 0
[    8.302689] .......    : LTS          : 0
[    8.303087] .... register #01: 00170011
[    8.303469] .......     : max redirection entries: 17
[    8.303973] .......     : PRQ implemented: 0
[    8.304399] .......     : IO APIC version: 11
[    8.304836] .... register #02: 00000000
[    8.305219] .......     : arbitration: 00
[    8.305623] .... IRQ redirection table:
[    8.306012] IOAPIC 0:
[    8.306254]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.307035]  pin01, enabled , edge , high, V(31), IRR(0), S(0), physical, D(00), M(0)
[    8.307813]  pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0)
[    8.308594]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.309367]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.310156]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.310935]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.311712]  pin07, enabled , edge , high, V(37), IRR(0), S(0), physical, D(00), M(0)
[    8.312489]  pin08, enabled , edge , high, V(38), IRR(0), S(0), physical, D(00), M(0)
[    8.313271]  pin09, enabled , level, high, V(39), IRR(0), S(0), physical, D(00), M(0)
[    8.314057]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.314840]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.315623]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), physical, D(00), M(0)
[    8.316402]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.317187]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), physical, D(00), M(0)
[    8.318001]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), physical, D(00), M(0)
[    8.318787]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.319566]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.320337]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.321130]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.321916]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.322700]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.323473]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.324261]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.325030] IRQ to pin mappings:
[    8.325354] IRQ0 -> 0:2
[    8.325632] IRQ1 -> 0:1
[    8.325915] IRQ3 -> 0:3
[    8.326186] IRQ4 -> 0:4
[    8.326460] IRQ5 -> 0:5
[    8.326742] IRQ6 -> 0:6
[    8.327015] IRQ7 -> 0:7
[    8.327288] IRQ8 -> 0:8
[    8.327567] IRQ9 -> 0:9
[    8.327838] IRQ10 -> 0:10
[    8.328126] IRQ11 -> 0:11
[    8.328416] IRQ12 -> 0:12
[    8.328716] IRQ13 -> 0:13
[    8.329012] IRQ14 -> 0:14
[    8.329302] IRQ15 -> 0:15
[    8.329603] .................................... done.
[    8.330313] Loading compiled-in X.509 certificates
[    8.331037] Btrfs loaded, assert=on, integrity-checker=on
[    8.331747] cryptomgr_probe (204) used greatest stack depth: 14552 bytes left
[    8.332548] Key type encrypted registered
[    8.333338] RIO: rio_register_scan for mport_id=-1
[    8.333948] register_blkdev: cannot get major 3 for hd
[    8.334569] rtc_cmos 00:00: setting system clock to 2016-02-27 03:39:04 UTC (1456544344)
[    8.335415] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    8.336022] EDD information not available.
[    8.336839] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    8.338450] ### dt-test ### start of unittest - you will see error messages
[    8.339262] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    8.340464] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    8.341650] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    8.342348] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    8.343063] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    8.343824] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    8.344732] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[    8.346260] ### dt-test ### end of unittest - 129 passed, 0 failed
[    8.347085] IP-Config: Failed to open ipddp0
[    8.350444] usb0: eth_open
[    8.351217] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    8.368877] Sending DHCP requests ., OK
[    8.369590] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    8.373701] usb0: eth_stop
[    8.373984] usb0: stop stats: rx/tx 0/0, errs 0/0
[    8.374645] IP-Config: Complete:
[    8.374981]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    8.375921]      host=vm-vp-quantal-x86_64-29, domain=, nis-domain=(none)
[    8.376593]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[    8.378013] debug: unmapping init [mem 0xffffffff8450e000-0xffffffff846fbfff]
[    8.378827] Write protecting the kernel read-only data: 45056k
[    8.380226] debug: unmapping init [mem 0xffff880002c77000-0xffff880002dfffff]
[    8.381008] debug: unmapping init [mem 0xffff880003a30000-0xffff880003bfffff]
[    8.385745] random: init urandom read with 13 bits of entropy available
[    8.394526] hwclock (214) used greatest stack depth: 14464 bytes left
[    8.404018] mountall (219) used greatest stack depth: 14168 bytes left
[    8.429020] init: Failed to create pty - disabling logging for job
[    8.429733] init: Temporary process spawn error: No space left on device
udevd[294]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory
udevd[317]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory
udevd[318]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory
udevd[319]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00': No such file or directory
udevd[339]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory
udevd[341]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:Fixed MDIO bus': No such file or directory
udevd[342]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[343]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:cr_backlight': No such file or directory
udevd[344]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:dell_rbu': No such file or directory
udevd[345]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:hgafb': No such file or directory
udevd[346]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:platform-framebuffer': No such file or directory
udevd[347]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:pcspkr': No such file or directory
udevd[348]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:microcode': No such file or directory
udevd[349]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:i5k_amb': No such file or directory
udevd[350]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device1T<NULL>Ctestcase-device': No such file or directory
udevd[352]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device2T<NULL>Ctestcase-device': No such file or directory
udevd[356]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[355]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[354]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXPWRBN:': No such file or directory
udevd[358]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv serio:ty01pr00id00ex00': No such file or directory
udevd[361]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory
udevd[362]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory
udevd[373]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv cpu:type:x86,ven0000fam0006mod0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0011,0013,0017,0018,0019,001A,002B,0034,003D,006F,0070,0072,0074,0075,0080,008D,0095,0097,009F,00C0
udevd[372]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v0525pA4A2d0405dc02dsc00dp00ic0Aisc00ip00in01': No such file or directory
udevd[363]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory
udevd[370]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[371]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v0525pA4A2d0405dc02dsc00dp00ic02isc06ip00in00': No such file or directory
udevd[369]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[368]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[367]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[364]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[366]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[365]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory
udevd[374]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[375]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[376]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[377]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[378]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory
udevd[380]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
udevd[379]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory
': No such file or directory
udevd[385]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory
udevd[384]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory
udevd[383]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory
udevd[382]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
start: Job is already running: rc

hostname: the specified hostname is invalid
==> /tmp/stdout <==

==> /tmp/stderr <==
hostname: the specified hostname is invalid
LKP: HOSTNAME vm-vp-quantal-x86_64-29, MAC 52:54:00:12:34:56, kernel 4.5.0-rc5-00004-g7cfe885 1, serial console /dev/ttyS0

==> /tmp/stdout <==
Kernel tests: Boot OK!
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin
/lkp/lkp/src/bin/run-lkp
RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/0
job=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml

==> /tmp/stderr <==
grep: grep: /etc/os-release/etc/os-release: No such file or directory: No such file or directory

/lkp/lkp/src/lib/job-init.sh: line 55: mount.cifs: command not found
/lkp/lkp/src/lib/job-init.sh: line 55: mount.cifs: command not found

==> /tmp/stdout <==
wget --local-encoding=UTF-8 http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml&job_state=miss_cifs -q -O /dev/null
/lkp/lkp/src/lib/misc.sh: line 75: wget: command not found

==> /tmp/stderr <==
/lkp/lkp/src/lib/misc.sh: line 75: wget: command not found
/lkp/lkp/src/lib/job-init.sh: line 150: killall: command not found
/lkp/lkp/src/lib/job-init.sh: line 150: killall: command not found

==> /tmp/stdout <==
wget --local-encoding=UTF-8 http://inn:80/~lkp/cgi-bin/lkp-post-run?job_file=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml -q -O /dev/null
/lkp/lkp/src/lib/misc.sh: line 75: wget: command not found

==> /tmp/stderr <==
/lkp/lkp/src/lib/misc.sh: line 75: wget: command not found

==> /tmp/stdout <==
LKP: rebooting
error: 'lkp-bootstrap' exited outside the expected code flow.
unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
[    9.485627] BUG: unable to handle kernel paging request at 0000005a000001cd
[    9.486432] IP: [<ffffffff811341dd>] __lock_acquire+0x245/0x175f
[    9.487149] PGD 9be6067 PUD 0 
[    9.487524] Oops: 0002 [#1] DEBUG_PAGEALLOC 
[    9.488009] CPU: 0 PID: 643 Comm: sync Not tainted 4.5.0-rc5-00004-g7cfe885 #1
[    9.488771] task: ffff8800085d0980 ti: ffff88000a554000 task.ti: ffff88000a554000
[    9.489553] RIP: 0010:[<ffffffff811341dd>]  [<ffffffff811341dd>] __lock_acquire+0x245/0x175f
[    9.490505] RSP: 0018:ffff88000a557e00  EFLAGS: 00010006
[    9.491061] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[    9.491802] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880014ee5ff8
[    9.492544] RBP: ffff88000a557e58 R08: 0000000000000000 R09: 0000000000000000
[    9.493281] R10: 0000005a00000035 R11: 0000000000000000 R12: 0000000000000000
[    9.494025] R13: 0000000000000000 R14: ffff880014ee5ff8 R15: ffff8800085d0980
[    9.494769] FS:  00007f0ff2734700(0000) GS:ffffffff83c3f000(0000) knlGS:0000000000000000
[    9.495608] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.496209] CR2: 0000005a000001cd CR3: 000000000a5be000 CR4: 00000000000006b0
[    9.496959] Stack:
[    9.497181]  ffffffff84c3fa20 ffff88000a557e70 0000000000000002 0000000000000000
[    9.498019]  ffffffff84c3fa30 0000000013c03c78 ffff880014ee5fe0 0000000000000000
[    9.498856]  0000000000000000 0000000000000000 0000000000000000 ffff88000a557ec0
[    9.499689] Call Trace:
[    9.499955]  [<ffffffff81135de9>] lock_acquire+0x10b/0x20c
[    9.500532]  [<ffffffff812d53ba>] ? iterate_bdevs+0xa5/0x1d4
[    9.501122]  [<ffffffff82c591ff>] _raw_spin_lock+0x4f/0x6e
[    9.501712]  [<ffffffff812d53ba>] ? iterate_bdevs+0xa5/0x1d4
[    9.502298]  [<ffffffff812d53ba>] iterate_bdevs+0xa5/0x1d4
[    9.502874]  [<ffffffff812c6e99>] ? fdatawait_one_bdev+0x28/0x28
[    9.503494]  [<ffffffff812c70ab>] sys_sync+0x8b/0xd0
[    9.504032]  [<ffffffff82c5a6f3>] entry_SYSCALL_64_fastpath+0x16/0x76
[    9.504714] Code: db 89 d8 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 e0 4d 8b 54 c6 08 48 83 05 8c a9 66 03 01 4d 85 d2 0f 84 48 fe ff ff <41> ff 82 98 01 00 00 48 83 05 0c ac 66 03 01 45 8b 9f a8 05 00 
[    9.507723] RIP  [<ffffffff811341dd>] __lock_acquire+0x245/0x175f
[    9.508442]  RSP <ffff88000a557e00>
[    9.508821] CR2: 0000005a000001cd
[    9.509175] ---[ end trace 47c7c54fdfc48c8d ]---
[    9.509663] Kernel panic - not syncing: Fatal exception
[    9.510211] Kernel Offset: disabled

Elapsed time: 20
qemu-system-x86_64 -enable-kvm -kernel /pkg/linux/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/vmlinuz-4.5.0-rc5-00004-g7cfe885 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-29/bisect_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-02261544-7cfe885cfd258695fde078e95b5a4b9ff030ccd0-20160227-64814-x391ig-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s3-02261544 branch=linux-devel/devel-hourly-2016022613 commit=7cfe885cfd258695fde078e95b5a4b9ff030ccd0 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/vmlinuz-4.5.0-rc5-00004-g7cfe885 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-02261544/gcc-5/7cfe885cfd258695fde078e95b5a4b9ff030ccd0/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-29::dhcp drbd.minor_count=8'  -initrd /fs/sdg1/initrd-vm-vp-quantal-x86_64-29 -m 360 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-29 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-x86_64-29 -daemonize -display none -monitor null 
