Hi, another update of the Allwinner A64 / Pine64 support series. I added a solution for the PLL6 reuse issue (the same patch I posted yesterday). Also I addressed the comments I got from Rob and Chen-Yu. For a changelog see below.
This series provides initial support for the Allwinner A64 SoC, which is based on four ARM Cortex-A53 cores implementing the ARMv8 64-bit architecture. On top of this there is also initial support for the Pine64 board, for which you can find more information and links in the linux-sunxi Wiki [1]. The resulting kernel boots fine on my development samples I have here, though the actual boot process is a bit involved at the moment. You can find more information and a ready-to-flash image here [2]. Patch 1/10 removes the hardcoded "pll6" name for the PLL6 clock, so it can be reused for the A64's PLL7, patch 2/10 uses that facility for the Allwinner H3 SoC's PLL8. Patch 3/10 enables the Allwinner/sunxi platform for the arm64 architecture, so one can select the required drivers during configuration. Patch 4/10 adds the pinctrl driver, which has been on the list before. Patch 5 and 6 add a new generic driver for the bus clock gates which relies on DT for providing the parent relationship. That makes adding new SoCs much easier, since there should be no more kernel code changes necessary. Patch 7-9 add the new vendor name and the device tree files, the former for the SoC itself, the latter for the Pine64 boards. The final patch 10 updates defconfig, so that the generic arm64 kernel supports the basic SoC drivers out of the box. In the moment we support the basic peripherals like GIC, timer, clocks, GPIOs, UARTs and (since v2) I2C. The MMC IP block has changed a bit compared to previous SoCs, so the existing driver is not 100% compatible. However the default delays seem to work fine for the SD cards, so I included all the necessary bits in here, since working MMC makes this series indefinitely more usable. We can fix both the MMC driver and the DT in a compatible way later. Please have a look and comment on the patches. We might want to split the series if some patches seem too controversial for being merged soonish, please let me know if this is the case and I am happy to rearrange the series. The patches are based on mripard/sunxi/for-next (since linux-next is a bit messy atm). A working repo can be found over here[3]. Cheers, Andre Changelog v1 .. v2: - Change the naming of DT nodes, identifiers and file names to include the wonderful Allwinner architecture prefix everywhere. You asked for it, you got it, enjoy! - Drop SUNXI_MMC to be selected automatically, instead put it in the defconfig. - Add a binding documentation for the new multi-bus-gates driver. - Add a defconfig update patch. - Lots of changes in the DTs, see the respective patches for details. Changelog v2 .. v3: - Reordered sunxi section in ARM64 platform config. - Add PLL6 reuse patch and rework the .dtsi to use the existing binding. - Drop unneeded module boilerplate for the pinctrl driver. - Rename "owa" pin to "spdif". - Rename pll8 to pll7 in the DT. - Remove leading 0 in DT node address parts. - Added Acks from Rob. [1] http://linux-sunxi.org/Pine64 [2] https://github.com/apritzel/pine64 [3] https://github.com/apritzel/linux/commits/a64-v3 Andre Przywara (10): clk: sunxi: allow PLL6 clock to be reused ARM: dts: sunxi: make PLL8 in the H3 a proper clock arm64: Introduce Allwinner SoC config option drivers: pinctrl: add driver for Allwinner A64 SoC DT: clk: sunxi: add binding doc for the multi-bus-gates clock clk: sunxi: add generic multi-parent bus clock gates driver arm64: dts: add Allwinner A64 SoC .dtsi of: add vendor prefix for Pine64 arm64: dts: add Pine64 support arm64: add defconfig options for Allwinner SoCs Documentation/devicetree/bindings/arm/sunxi.txt | 1 + Documentation/devicetree/bindings/clock/sunxi.txt | 7 + .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/sun8i-h3.dtsi | 18 +- arch/arm64/Kconfig.platforms | 6 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/allwinner/Makefile | 5 + .../dts/allwinner/sun50i-a64-pine64-common.dtsi | 80 +++ .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 59 ++ .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 58 ++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 624 +++++++++++++++++++++ arch/arm64/configs/defconfig | 7 + drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk-factors.c | 3 +- drivers/clk/sunxi/clk-factors.h | 1 + drivers/clk/sunxi/clk-multi-gates.c | 105 ++++ drivers/clk/sunxi/clk-sunxi.c | 4 +- drivers/pinctrl/sunxi/Kconfig | 4 + drivers/pinctrl/sunxi/Makefile | 1 + drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 602 ++++++++++++++++++++ 21 files changed, 1577 insertions(+), 12 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/Makefile create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi create mode 100644 drivers/clk/sunxi/clk-multi-gates.c create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c -- 2.6.4
