On Tue, Feb 16, 2016 at 01:14:38AM -0800, Amitkumar Karwar wrote: > From: Xinming Hu <h...@marvell.com> > > This patch parse chip specific gpio parameter from device > tree. Corresponding binding file is also updated. > > Signed-off-by: Xinming Hu <h...@marvell.com> > Signed-off-by: Amitkumar Karwar <akar...@marvell.com> > --- > v4: Renamed "mwifiex,chip-gpio" to "marvell,wakeup-gpios"(Rob Herring/ > Arnd Bergmann) > --- > .../devicetree/bindings/net/wireless/marvell-sd8xxx.txt | 6 ++++--
Combine this with the DT change in the next patch. > drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 9 > +++++++++ > 2 files changed, 13 insertions(+), 2 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > index f7671ae..c337fab 100644 > --- a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > +++ b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > @@ -11,7 +11,9 @@ Optional properties: > - marvell,caldata* : A series of properties with marvell,caldata prefix, > represent Calibration data downloaded to the device during > initialization. This is an array of unsigned values. > - > + - marvell,wakeup-gpios : Chip's wakeup gpio pin number. This needs to be > downloaded > + to to firmware. Chip notifies wifi wakeup signal to SOC > + through this pin. This is still confusing that it is not a GPIO from the host. I'd suggest "marvell,wakeup-pin"
