This includes fixing some Coding Style issues and re-ordering/
simplifying a little code.

Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 drivers/pwm/pwm-sti.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 93cf20e..93e3abf 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -144,13 +144,13 @@ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, 
unsigned long period,
        val = NSEC_PER_SEC / clk_rate;
        val *= cdata->max_pwm_cnt + 1;
 
-       if (period % val) {
+       if (period % val)
                return -EINVAL;
-       } else {
-               ps  = period / val - 1;
-               if (ps > cdata->max_prescale)
-                       return -EINVAL;
-       }
+
+       ps  = period / val - 1;
+       if (ps > cdata->max_prescale)
+               return -EINVAL;
+
        *prescale = ps;
 
        return 0;
@@ -166,7 +166,7 @@ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, 
unsigned long period,
  * 256 values.
  */
 static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-                        int duty_ns, int period_ns)
+                       int duty_ns, int period_ns)
 {
        struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
        struct sti_pwm_compat_data *cdata = pc->cdata;
@@ -212,7 +212,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct 
pwm_device *pwm,
 
                        ret =
                        regmap_field_write(pc->prescale_low,
-                                          prescale & PWM_PRESCALE_LOW_MASK);
+                               prescale & PWM_PRESCALE_LOW_MASK);
                        if (ret)
                                goto clk_dis;
 
@@ -506,7 +506,7 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
                return PTR_ERR(pc->pwm_cpt_en);
 
        pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
-                                                reg_fields[PWM_CPT_INT_EN]);
+                                               reg_fields[PWM_CPT_INT_EN]);
        if (IS_ERR(pc->pwm_cpt_int_en))
                return PTR_ERR(pc->pwm_cpt_int_en);
 
@@ -570,10 +570,11 @@ static int sti_pwm_probe(struct platform_device *pdev)
         * Setup PWM data with default values: some values could be replaced
         * with specific ones provided from Device Tree.
         */
-       cdata->reg_fields   = &sti_pwm_regfields[0];
-       cdata->max_prescale = 0xff;
-       cdata->max_pwm_cnt  = 255;
-       cdata->pwm_num_chan     = 1;
+
+       cdata->reg_fields       = &sti_pwm_regfields[0];
+       cdata->max_prescale     = 0xff;
+       cdata->max_pwm_cnt      = 255;
+       cdata->pwm_num_chan     = 1;
        cdata->cpt_num_chan     = 0;
 
        pc->cdata = cdata;
-- 
1.9.1

Reply via email to