On Monday 08 February 2016 10:11:38 Antoine Tenart wrote:
> index 000000000000..3e3080fa45e4
> --- /dev/null
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + model = "Annapurna Labs Alpine v2";
> + compatible = "al,alpine-v2";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + };
Move the aliases to the .dts files and drop the ones that are disabled.
> +
> + pcie-internal@0xfbc00000 {
make this
pci@fbc00000 {
> + compatible = "pci-host-ecam-generic";
> + device_type = "pci";
> + #size-cells = <2>;
> + #address-cells = <3>;
> + #interrupt-cells = <1>;
> + reg = <0x0 0xfbc00000 0x0 0x100000>;
> + interrupt-map-mask = <0xf800 0 0 7>;
> + /* add legacy interrupts for SATA only */
> + interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
> + <0x4800 0 0 1 &gic 0 54 4>;
What's wrong with the other IRQs? Not connected?
> +
> + uart0: uart@fd883000 {
serial@fd883000
Almost all devices are in the 0xfd000000 range. Could this be a bus in the
SoC that has all the devices attached to it? Maybe use a "ranges" property
to reflect that. In doubt, use the register numbers from the data sheet if you
have one.
Arnd
