Hi Andreas,
Am Montag, 8. Februar 2016, 03:17:33 schrieb Andreas Färber:
> Signed-off-by: Andreas Färber <afaer...@suse.de>
is there some special reason that gmac, emmc, ir, etc are in separate
patches? I guess I'll just fold them into the core patch otherwise.
Heiko
> ---
> v2: New
>
> arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
> b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index
> bc91d39758ab..a8dcf3c2b0c1 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
> @@ -56,6 +56,13 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + ext_gmac: gmac-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "ext_gmac";
> + #clock-cells = <0>;
> + };
> +
> leds: gpio-leds {
> compatible = "gpio-leds";
>
> @@ -82,6 +89,19 @@
> };
> };
>
> +&gmac {
> + status = "okay";
> + phy-supply = <&vcc_lan>;
> + phy-mode = "rgmii";
> + clock_in_out = "input";
> + assigned-clocks = <&cru SCLK_MAC>;
> + assigned-clock-parents = <&ext_gmac>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + tx_delay = <0x30>;
> + rx_delay = <0x10>;
> +};
> +
> &i2c0 {
> status = "okay";
