On 02/02/16 17:50, Andrew F. Davis wrote:
> Add the TI afe4404 heart monitor DT bindings documentation.
> Create health directory created under iio.
>
> Signed-off-by: Andrew F. Davis <a...@ti.com>
Nothing terribly controversial in here I think and its been around in roughly
this
form for a long time so I'm applying this now.
Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to test the other patches in the series.
Jonathan
> ---
> .../devicetree/bindings/iio/health/afe4404.txt | 30
> ++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt
> b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> new file mode 100644
> index 0000000..de69f20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> @@ -0,0 +1,30 @@
> +Texas Instruments AFE4404 Heart rate and Pulse Oximeter
> +
> +Required properties:
> + - compatible : Should be "ti,afe4404".
> + - reg : I2C address of the device.
> + - tx-supply : Regulator supply to transmitting LEDs.
> + - interrupt-parent : Phandle to he parent interrupt controller.
> + - interrupts : The interrupt line the device ADC_RDY pin is
> + connected to. For details refer to,
> + ../interrupt-controller/interrupts.txt.
> +
> +Optional properties:
> + - reset-gpios : GPIO used to reset the device.
> + For details refer to, ../gpio/gpio.txt.
> +
> +Example:
> +
> +&i2c2 {
> + heart_mon@58 {
> + compatible = "ti,afe4404";
> + reg = <0x58>;
> +
> + tx-supply = <&vbat>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
> +
> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + };
> +};
>
