There seems to be a regression in resuming my laptop from a suspend to RAM or
disk. The symptom is that my bluetooth
mouse doesn't work after the resume. The kernel is built after a pull of Linus'
tree this morning (v4.5-rc2-340-g5af9c2e).
Attached is the output from dmesg showing the boot, suspend (to RAM) and
resume. You'll see that during the resume,
error -517 is being reported for some devices. Suspend/resume has worked
perfectly with a 4.[234].x kernels.
I'll start a bisection, but thought I'd give a heads up in case someone can see
the problem before I get done with the
bisect.
Chris
[ 0.000000] Linux version 4.5.0-rc2+ (chris@laptop) (gcc version 5.3.1
20160202 (GCC) ) #318 SMP PREEMPT Sat Feb 6 06:38:55 GMT 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-rc2+ ro
root=/dev/sda2 resume=/dev/sda6 rootfstype=ext4 net.ifnames=0
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7216fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7217000-0x00000000d721dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d721e000-0x00000000d7a0cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7a0d000-0x00000000d7ca1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7ca2000-0x00000000db4dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db4e0000-0x00000000db82dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db82e000-0x00000000db88afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db88b000-0x00000000db9bcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db9bd000-0x00000000dbffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Notebook W65_67SZ
/W65_67SZ , BIOS 1.03.05 02/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at
[ffff8800000fd820]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01a05000, 0x01a05fff] PGTABLE
[ 0.000000] BRK [0x01a06000, 0x01a06fff] PGTABLE
[ 0.000000] BRK [0x01a07000, 0x01a07fff] PGTABLE
[ 0.000000] BRK [0x01a08000, 0x01a08fff] PGTABLE
[ 0.000000] BRK [0x01a09000, 0x01a09fff] PGTABLE
[ 0.000000] BRK [0x01a0a000, 0x01a0afff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DB993088 00008C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DB99FEA8 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DB9931A8 00CCFA (v02 ALASKA A M I
00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DB9BB080 000040
[ 0.000000] ACPI: APIC 0x00000000DB99FFB8 000092 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DB9A0050 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000DB9A0098 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DB9A0140 000F92 (v01 TrmRef PtidDevc
00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A10D8 000539 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DB9A1618 000AD8 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DB9A20F0 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DB9A2130 000038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DB9A2168 000315 (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A2480 001BFB (v01 SaSsdt SaSsdt
00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A4080 000EA8 (v01 SgRef SgPeg
00001000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000DB9A4F28 000090 (v01 INTEL HSW
00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d7216fff]
[ 0.000000] node 0: [mem 0x00000000d721e000-0x00000000d7a0cfff]
[ 0.000000] node 0: [mem 0x00000000d7ca2000-0x00000000db4dffff]
[ 0.000000] node 0: [mem 0x00000000db82e000-0x00000000db88afff]
[ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4173886
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13963 pages used for memmap
[ 0.000000] DMA32 zone: 893602 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7217000-0xd721dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7a0d000-0xd7ca1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb4e0000-0xdb82dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb88b000-0xdb9bcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb9bd000-0xdbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88041fa00000 s85400 r8192
d29288 u262144
[ 0.000000] pcpu-alloc: s85400 r8192 d29288 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 4108646
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-rc2+ ro
root=/dev/sda2 resume=/dev/sda6 rootfstype=ext4 net.ifnames=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Memory: 16331268K/16695544K available (6126K kernel code, 560K
rwdata, 2188K rodata, 812K init, 520K bss, 364276K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:4352 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.213 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4988.42 BogoMIPS (lpj=9976852)
[ 0.000119] pid_max: default: 32768 minimum: 301
[ 0.000168] ACPI: Core revision 20160108
[ 0.006337] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.006480] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.006532] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.006736] CPU: Physical Processor ID: 0
[ 0.006782] CPU: Processor Core ID: 0
[ 0.006830] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006880] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006934] mce: CPU supports 9 MCE banks
[ 0.006990] CPU0: Thermal monitoring enabled (TM1)
[ 0.007045] process: using mwait in idle threads
[ 0.007093] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.007144] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.007457] Freeing SMP alternatives memory: 24K (ffffffff8197b000 -
ffffffff81981000)
[ 0.018823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058558] TSC deadline timer enabled
[ 0.058559] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz
(family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.058728] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events,
full-width counters, Intel PMU driver.
[ 0.058959] ... version: 3
[ 0.059006] ... bit width: 48
[ 0.059053] ... generic registers: 4
[ 0.059099] ... value mask: 0000ffffffffffff
[ 0.059148] ... max period: 0000ffffffffffff
[ 0.059196] ... fixed-purpose events: 3
[ 0.059243] ... event mask: 000000070000000f
[ 0.090621] x86: Booting SMP configuration:
[ 0.090669] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.165148] x86: Booted up 1 node, 8 CPUs
[ 0.165241] smpboot: Total of 8 processors activated (39907.40 BogoMIPS)
[ 0.170167] devtmpfs: initialized
[ 0.170325] PM: Registering ACPI NVS region [mem 0xd7217000-0xd721dfff]
(28672 bytes)
[ 0.170379] PM: Registering ACPI NVS region [mem 0xdb88b000-0xdb9bcfff]
(1253376 bytes)
[ 0.170488] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.170645] NET: Registered protocol family 16
[ 0.182109] cpuidle: using governor ladder
[ 0.194113] cpuidle: using governor menu
[ 0.194218] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.194274] ACPI: bus type PCI registered
[ 0.194323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.194407] PCI: Using configuration type 1 for base access
[ 0.194621] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around,
HT is on
[ 0.210276] ACPI: Added _OSI(Module Device)
[ 0.210326] ACPI: Added _OSI(Processor Device)
[ 0.210376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.210426] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.211865] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.213371] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.213723] ACPI: Dynamic OEM Table Load:
[ 0.213832] ACPI: SSDT 0xFFFF88040DAAB400 0003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.214349] ACPI: Dynamic OEM Table Load:
[ 0.214459] ACPI: SSDT 0xFFFF88040DB32000 0005AA (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.214990] ACPI: Dynamic OEM Table Load:
[ 0.215098] ACPI: SSDT 0xFFFF88040DB23000 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.216919] ACPI : EC: EC started
[ 0.217181] ACPI: Interpreter enabled
[ 0.217244] ACPI: (supports S0 S3 S4 S5)
[ 0.217290] ACPI: Using IOAPIC for interrupt routing
[ 0.217354] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.221940] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.221993] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.222123] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires
[ExtendedConfig ASPM ClockPM MSI]
[ 0.222375] PCI host bridge to bus 0000:00
[ 0.222423] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.222474] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.222526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.222579] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.222632] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.222684] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.222737] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.222790] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff
window]
[ 0.222843] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff
window]
[ 0.222896] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff
window]
[ 0.222949] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.223002] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.223055] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.223077] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.223126] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.223199] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.223206] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.223210] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.223213] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.223262] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.223267] pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
[ 0.223338] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.223352] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.223402] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.223424] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.223494] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.223509] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1e000-0xf7f1e00f 64bit]
[ 0.223561] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.223610] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.223624] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f1c000-0xf7f1c3ff]
[ 0.223696] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.223728] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.223800] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.223811] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.223863] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.223886] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.223956] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.224004] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.224046] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.224116] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.224165] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.224204] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.224274] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.224323] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.224362] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.224432] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.224481] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.224520] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.224595] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.224609] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b3ff]
[ 0.224680] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.224711] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.224784] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.224910] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.224920] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.224926] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.224931] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.224937] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.224942] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.224948] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1a000-0xf7f1a7ff]
[ 0.224976] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.225016] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.225027] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f19000-0xf7f190ff 64bit]
[ 0.225043] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.225113] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.225201] acpiphp: Slot [1] registered
[ 0.225249] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.225350] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.225364] pci 0000:03:00.0: reg 0x10: [mem 0xf7e00000-0xf7e00fff]
[ 0.225476] pci 0000:03:00.0: supports D1 D2
[ 0.225477] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.225492] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.230207] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.230262] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.230330] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
[ 0.230361] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[ 0.230519] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.230542] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.238212] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.238266] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.238326] pci 0000:05:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.238341] pci 0000:05:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
[ 0.238463] pci 0000:05:00.0: supports D1 D2
[ 0.238464] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.238484] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.238571] pci 0000:05:00.2: [10ec:8168] type 00 class 0x020000
[ 0.238586] pci 0000:05:00.2: reg 0x10: [io 0xe000-0xe0ff]
[ 0.238613] pci 0000:05:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit
pref]
[ 0.238630] pci 0000:05:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit
pref]
[ 0.238701] pci 0000:05:00.2: supports D1 D2
[ 0.238702] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.238722] pci 0000:05:00.2: System wakeup disabled by ACPI
[ 0.246214] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.246266] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.246269] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.246273] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff
64bit pref]
[ 0.246293] pci_bus 0000:00: on NUMA node 0
[ 0.246821] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.247249] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.247675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.248097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.248506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.248985] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.249454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.249861] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.250396] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.250525] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.250612] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.250662] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250716] vgaarb: loaded
[ 0.250761] vgaarb: bridge control possible 0000:00:02.0
[ 0.250838] SCSI subsystem initialized
[ 0.250888] libata version 3.00 loaded.
[ 0.250891] ACPI: bus type USB registered
[ 0.250947] usbcore: registered new interface driver usbfs
[ 0.251000] usbcore: registered new interface driver hub
[ 0.251060] usbcore: registered new device driver usb
[ 0.251119] Linux video capture interface: v2.00
[ 0.251198] Advanced Linux Sound Architecture Driver Initialized.
[ 0.251250] PCI: Using ACPI for IRQ routing
[ 0.251298] PCI: pci_cache_line_size set to 64 bytes
[ 0.251345] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.251345] e820: reserve RAM buffer [mem 0xd7217000-0xd7ffffff]
[ 0.251346] e820: reserve RAM buffer [mem 0xd7a0d000-0xd7ffffff]
[ 0.251347] e820: reserve RAM buffer [mem 0xdb4e0000-0xdbffffff]
[ 0.251347] e820: reserve RAM buffer [mem 0xdb88b000-0xdbffffff]
[ 0.251348] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.251409] Bluetooth: Core ver 2.21
[ 0.251457] NET: Registered protocol family 31
[ 0.251504] Bluetooth: HCI device and connection manager initialized
[ 0.251555] Bluetooth: HCI socket layer initialized
[ 0.251604] Bluetooth: L2CAP socket layer initialized
[ 0.251654] Bluetooth: SCO socket layer initialized
[ 0.251766] clocksource: Switched to clocksource hpet
[ 0.251899] pnp: PnP ACPI init
[ 0.251989] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.252043] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.252229] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.252281] system 00:01: [io 0xffff] has been reserved
[ 0.252332] system 00:01: [io 0xffff] has been reserved
[ 0.252383] system 00:01: [io 0xffff] has been reserved
[ 0.252434] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.252486] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.252537] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.252589] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.252641] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.252701] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.252751] system 00:01: [io 0x3322-0x3323] has been reserved
[ 0.252802] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252814] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252838] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.252889] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.252903] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.252946] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13
(active)
[ 0.252971] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.253022] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253197] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.253249] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.253301] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.253352] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.253403] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.253455] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.253506] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.253558] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.253609] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.253661] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.253713] system 00:07: [mem 0xf7ffe000-0xf7ffefff] has been reserved
[ 0.253764] system 00:07: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
[ 0.253816] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253930] pnp: PnP ACPI: found 8 devices
[ 0.259309] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.259402] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.259454] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.259510] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.259561] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.259617] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.259668] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.259724] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.259777] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.259829] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.259883] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff
64bit pref]
[ 0.259940] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.259941] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.259941] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.259942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.259943] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.259944] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.259944] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.259945] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.259946] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.259947] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.259948] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.259948] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.259949] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.259950] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.259951] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit
pref]
[ 0.259967] NET: Registered protocol family 2
[ 0.260092] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.260245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.260380] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260441] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.260515] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.260611] NET: Registered protocol family 1
[ 0.260666] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.260742] PCI: CLS 64 bytes, default 64
[ 0.260768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.260820] software IO TLB [mem 0xd3217000-0xd7217000] (64MB) mapped at
[ffff8800d3217000-ffff8800d7216fff]
[ 0.260924] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters
655360 ms ovfl timer
[ 0.260990] hw unit of domain pp0-core 2^-14 Joules
[ 0.261038] hw unit of domain package 2^-14 Joules
[ 0.261086] hw unit of domain dram 2^-14 Joules
[ 0.261134] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.261341] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.262735] fuse init (API version 7.24)
[ 0.263505] io scheduler noop registered
[ 0.263580] io scheduler cfq registered (default)
[ 0.264030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.264085] intel_idle: MWAIT substates: 0x42120
[ 0.264086] intel_idle: v0.4 model 0x3C
[ 0.264087] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.264330] ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
[ 0.264433] ACPI: AC Adapter [AC] (on-line)
[ 0.264537] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.264597] ACPI: Power Button [PWRB]
[ 0.264677] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.264736] ACPI: Sleep Button [SLPB]
[ 0.264818] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.264897] ACPI: Lid Switch [LID0]
[ 0.264978] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.265044] ACPI: Power Button [PWRF]
[ 0.265341] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.265392] ACPI: Thermal Zone [TZ0] (14 C)
[ 0.265799] ACPI: Deprecated procfs I/F for battery is loaded, please retry
with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.265890] ACPI: Battery Slot [BAT0] (battery present)
[ 0.269301] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.269536] Linux agpgart interface v0.103
[ 0.269602] [drm] Initialized drm 1.1.0 20060810
[ 0.269933] pmd_set_huge: Cannot satisfy [mem 0xf7800000-0xf7a00000] with a
huge-page mapping due to MTRR override.
[ 0.270086] [drm] Memory usable by graphics device = 2048M
[ 0.270137] [drm] Replacing VGA console driver
[ 0.270696] Console: switching to colour dummy device 80x25
[ 0.277061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.277064] [drm] Driver supports precise vblank timestamp query.
[ 0.277240] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.322414] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.322674] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.322695] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 0.323292] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 0,
pci->irq = 17
[ 0.323794] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 0,
pci->irq = 16
[ 0.324270] ahci 0000:00:1f.2: version 3.0
[ 0.324293] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.324315] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x25
impl SATA mode
[ 0.324318] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part
ems sxs apst
[ 0.340237] scsi host0: ahci
[ 0.340520] scsi host1: ahci
[ 0.340749] scsi host2: ahci
[ 0.340863] scsi host3: ahci
[ 0.340951] scsi host4: ahci
[ 0.341052] scsi host5: ahci
[ 0.341092] ata1: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a100
irq 19
[ 0.341095] ata2: DUMMY
[ 0.341098] ata3: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a200
irq 19
[ 0.341100] ata4: DUMMY
[ 0.341102] ata5: DUMMY
[ 0.341104] ata6: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a380
irq 19
[ 0.341129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.341141] ehci-pci: EHCI PCI platform driver
[ 0.341228] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.341235] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 0.341249] ehci-pci 0000:00:1a.0: debug port 2
[ 0.345138] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.345141] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f1c000
[ 0.355792] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.355820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.355823] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.355826] usb usb1: Product: EHCI Host Controller
[ 0.355828] usb usb1: Manufacturer: Linux 4.5.0-rc2+ ehci_hcd
[ 0.355831] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.355919] hub 1-0:1.0: USB hub found
[ 0.355924] hub 1-0:1.0: 2 ports detected
[ 0.356086] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.356092] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.356102] ehci-pci 0000:00:1d.0: debug port 2
[ 0.360001] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.360007] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1b000
[ 0.371796] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.371819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.371822] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.371825] usb usb2: Product: EHCI Host Controller
[ 0.371828] usb usb2: Manufacturer: Linux 4.5.0-rc2+ ehci_hcd
[ 0.371830] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.371948] hub 2-0:1.0: USB hub found
[ 0.371954] hub 2-0:1.0: 2 ports detected
[ 0.372037] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.372121] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.372127] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 3
[ 0.373196] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00009810
[ 0.373201] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.373227] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.373230] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.373232] usb usb3: Product: xHCI Host Controller
[ 0.373234] usb usb3: Manufacturer: Linux 4.5.0-rc2+ xhci-hcd
[ 0.373236] usb usb3: SerialNumber: 0000:00:14.0
[ 0.373330] hub 3-0:1.0: USB hub found
[ 0.373346] hub 3-0:1.0: 14 ports detected
[ 0.374778] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.374782] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 4
[ 0.374804] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.374806] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.374808] usb usb4: Product: xHCI Host Controller
[ 0.374810] usb usb4: Manufacturer: Linux 4.5.0-rc2+ xhci-hcd
[ 0.374812] usb usb4: SerialNumber: 0000:00:14.0
[ 0.374894] hub 4-0:1.0: USB hub found
[ 0.374903] hub 4-0:1.0: 4 ports detected
[ 0.375321] usbcore: registered new interface driver usb-storage
[ 0.375328] usbcore: registered new interface driver ums-realtek
[ 0.375347] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at
0x60,0x64 irq 1,12
[ 0.378999] i8042: Detected active multiplexing controller, rev 1.1
[ 0.380669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.380687] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.380701] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.380713] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.380727] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.380833] mousedev: PS/2 mouse device common for all mice
[ 0.381041] rtc_cmos 00:02: RTC can wake from S4
[ 0.381140] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.381160] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 0.381166] i2c /dev entries driver
[ 0.381313] ACPI Warning: SystemIO range
0x000000000000F040-0x000000000000F05F conflicts with OpRegion
0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI)
(20160108/utaddress-255)
[ 0.381321] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 0.381372] usbcore: registered new interface driver uvcvideo
[ 0.381374] USB Video Class driver (1.1.1)
[ 0.383771] usbcore: registered new interface driver usbhid
[ 0.383773] usbhid: USB HID core driver
[ 0.383881] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.383886] NET: Registered protocol family 17
[ 0.383894] NET: Registered protocol family 15
[ 0.384022] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 0.384091] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384099] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384113] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384141] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384319] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384323] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384346] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384384] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17
[ 0.384444] microcode: Microcode Update Driver: v2.01
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.384592] registered taskstats version 1
[ 0.385076] rtc_cmos 00:02: setting system clock to 2016-02-06 08:17:21 UTC
(1454746641)
[ 0.460339] fbcon: inteldrmfb (fb0) is primary device
[ 0.650543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.652114] ata1.00: ATAPI: MATSHITABD-MLT UJ260AF, 1.00, max UDMA/133
[ 0.653506] ata1.00: configured for UDMA/133
[ 0.671809] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.683818] usb 3-7: new full-speed USB device number 2 using xhci_hcd
[ 0.683826] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.804268] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.804270] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.804672] hub 1-1:1.0: USB hub found
[ 0.804887] hub 1-1:1.0: 6 ports detected
[ 0.812875] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[ 0.812876] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.816221] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 0.816222] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.816488] hub 2-1:1.0: USB hub found
[ 0.816585] hub 2-1:1.0: 8 ports detected
[ 0.979839] usb 3-8: new high-speed USB device number 3 using xhci_hcd
[ 1.178058] usb 3-8: New USB device found, idVendor=04f2, idProduct=b43b
[ 1.178059] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.178060] usb 3-8: Product: Chicony USB 2.0 Camera
[ 1.178061] usb 3-8: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.178061] usb 3-8: SerialNumber: 0x0001
[ 1.182558] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera
(04f2:b43b)
[ 1.259839] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.259841] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x23f3e9a353a, max_idle_ns: 440795330815 ns
[ 1.882271] Console: switching to colour frame buffer device 200x56
[ 1.884502] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.897343] scsi 0:0:0:0: CD-ROM MATSHITA BD-MLT UJ260AF 1.00
PQ: 0 ANSI: 5
[ 1.914294] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.914319] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.914483] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.914544] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.227237] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.259956] clocksource: Switched to clocksource tsc
[ 2.539200] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.541254] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.541257] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 2.541912] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 2.543858] ata6.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 2.544517] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 2.546693] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.546696] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 2.547364] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 2.549415] ata6.00: configured for UDMA/133
[ 2.550244] scsi 5:0:0:0: Direct-Access ATA HGST HTS541010A9 A560
PQ: 0 ANSI: 5
[ 2.572011] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/932 GiB)
[ 2.572012] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 2.573289] sd 5:0:0:0: [sda] 4096-byte physical blocks
[ 2.574008] sd 5:0:0:0: [sda] Write Protect is off
[ 2.574542] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.574611] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.681494] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11
>
[ 2.683034] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.703325] ALSA device list:
[ 2.703948] No soundcards found.
[ 2.740929] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.741679] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 2.766294] devtmpfs: mounted
[ 2.767157] Freeing unused kernel memory: 812K (ffffffff818b0000 -
ffffffff8197b000)
[ 3.996787] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
[ 3.998922] microcode: CPU0 updated to revision 0x1e, date = 2015-08-13
[ 3.999656] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
[ 4.001062] microcode: CPU1 updated to revision 0x1e, date = 2015-08-13
[ 4.001749] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
[ 4.003108] microcode: CPU2 updated to revision 0x1e, date = 2015-08-13
[ 4.003792] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
[ 4.005175] microcode: CPU3 updated to revision 0x1e, date = 2015-08-13
[ 4.005848] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17
[ 4.007592] microcode: CPU4 updated to revision 0x1e, date = 2015-08-13
[ 4.008679] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17
[ 4.010041] microcode: CPU5 updated to revision 0x1e, date = 2015-08-13
[ 4.010726] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17
[ 4.012097] microcode: CPU6 updated to revision 0x1e, date = 2015-08-13
[ 4.012796] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17
[ 4.014159] microcode: CPU7 updated to revision 0x1e, date = 2015-08-13
[ 4.226239] udevd[233]: starting version 3.1.2
[ 4.353033] random: udevd urandom read with 125 bits of entropy available
[ 4.428676] random: nonblocking pool is initialized
[ 4.913996] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.914569] r8169 0000:05:00.2: can't disable ASPM; OS doesn't have ASPM
control
[ 4.915720] r8169 0000:05:00.2 eth0: RTL8411 at 0xffffc9000032e000,
80:fa:5b:08:d0:3d, XID 08800800 IRQ 19
[ 4.916367] r8169 0000:05:00.2 eth0: jumbo features [frames: 9200 bytes, tx
checksumming: ko]
[ 5.179953] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
0xffffffff8166bef0)
[ 5.301950] usbcore: registered new interface driver btusb
[ 5.314851] Bluetooth: hci0: read Intel version: 3707100180012d0d1a
[ 5.315569] Bluetooth: hci0: Intel device is already patched. patch num: 1a
[ 5.500385] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802:
line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[ 5.501359] snd_hda_codec_via hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 5.502321] snd_hda_codec_via hdaudioC1D0: hp_outs=1
(0x25/0x0/0x0/0x0/0x0)
[ 5.503272] snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
[ 5.504242] snd_hda_codec_via hdaudioC1D0: inputs:
[ 5.505167] snd_hda_codec_via hdaudioC1D0: Internal Mic=0x30
[ 5.506081] snd_hda_codec_via hdaudioC1D0: Mic=0x2b
[ 5.512644] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 5.513496] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 5.532778] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 5.533550] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 5.534177] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 8.694470] Adding 16777212k swap on /dev/sda6. Priority:1 extents:1
across:16777212k
[ 8.722117] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.892912] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.474281] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.530072] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.586088] EXT4-fs (sda10): mounted filesystem with ordered data mode.
Opts: (null)
[ 11.801647] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 12.062779] r8169 0000:05:00.2 eth0: link down
[ 12.062779] r8169 0000:05:00.2 eth0: link down
[ 13.681533] r8169 0000:05:00.2 eth0: link up
[ 14.683181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.684025] Bluetooth: BNEP filters: protocol multicast
[ 14.684801] Bluetooth: BNEP socket layer initialized
[ 49.416065] Bluetooth: RFCOMM TTY layer initialized
[ 49.416070] Bluetooth: RFCOMM socket layer initialized
[ 49.416073] Bluetooth: RFCOMM ver 1.11
[ 61.566023] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 61.566028] Bluetooth: HIDP socket layer initialized
[ 61.566498] hid-generic 0005:0A5C:0001.0001: unknown main item tag 0x0
[ 61.566540] input: Bluetooth 3.0 mouse as
/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/bluetooth/hci0/hci0:256/0005:0A5C:0001.0001/input/input15
[ 61.566644] hid-generic 0005:0A5C:0001.0001: input: BLUETOOTH HID v1.29
Mouse [Bluetooth 3.0 mouse] on 80:19:34:5a:67:51
[ 117.254420] ata6.00: configured for UDMA/133
[ 117.254424] ata6: EH complete
[ 117.283062] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 117.289181] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 117.290569] EXT4-fs (sda9): re-mounted. Opts: commit=0
[ 117.291683] EXT4-fs (sda10): re-mounted. Opts: commit=0
[ 117.618277] PM: Syncing filesystems ... done.
[ 117.693961] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 117.695256] Freezing remaining freezable tasks ... (elapsed 2.102 seconds)
done.
[ 119.797815] Suspending console(s) (use no_console_suspend to debug)
[ 119.798002] sd 5:0:0:0: [sda] Synchronizing SCSI cache
[ 119.798155] sd 5:0:0:0: [sda] Stopping disk
[ 120.588328] PM: suspend of devices complete after 790.379 msecs
[ 120.612399] PM: late suspend of devices complete after 24.067 msecs
[ 120.612933] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 120.612935] r8169 0000:05:00.2: System wakeup enabled by ACPI
[ 120.613034] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 120.613043] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 120.628344] PM: noirq suspend of devices complete after 15.943 msecs
[ 120.628620] ACPI: Preparing to enter system sleep state S3
[ 120.629598] ACPI : EC: EC stopped
[ 120.629598] PM: Saving platform NVS memory
[ 120.629603] Disabling non-boot CPUs ...
[ 120.645368] smpboot: CPU 1 is now offline
[ 120.665370] smpboot: CPU 2 is now offline
[ 120.681363] smpboot: CPU 3 is now offline
[ 120.697365] smpboot: CPU 4 is now offline
[ 120.713355] smpboot: CPU 5 is now offline
[ 120.729365] smpboot: CPU 6 is now offline
[ 120.745346] smpboot: CPU 7 is now offline
[ 120.746463] ACPI: Low-level resume complete
[ 120.746494] ACPI : EC: EC started
[ 120.746495] PM: Restoring platform NVS memory
[ 120.746787] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.746788] Enabling non-boot CPUs ...
[ 120.746823] x86: Booting SMP configuration:
[ 120.746824] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 120.748830] microcode: CPU1 microcode updated early to revision 0x1e, date =
2015-08-13
[ 120.750974] cache: parent cpu1 should not be sleeping
[ 120.751039] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.751126] CPU1 is up
[ 120.751139] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 120.752303] microcode: CPU2 microcode updated early to revision 0x1e, date =
2015-08-13
[ 120.754433] cache: parent cpu2 should not be sleeping
[ 120.754497] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.754580] CPU2 is up
[ 120.754592] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 120.755756] microcode: CPU3 microcode updated early to revision 0x1e, date =
2015-08-13
[ 120.757883] cache: parent cpu3 should not be sleeping
[ 120.757948] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.758029] CPU3 is up
[ 120.758042] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 120.759210] microcode: CPU4 microcode updated early to revision 0x1e, date =
2015-08-13
[ 120.761333] cache: parent cpu4 should not be sleeping
[ 120.761375] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.761439] CPU4 is up
[ 120.761448] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 120.763873] cache: parent cpu5 should not be sleeping
[ 120.763917] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.763978] CPU5 is up
[ 120.763988] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 120.766311] cache: parent cpu6 should not be sleeping
[ 120.766355] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.766417] CPU6 is up
[ 120.766426] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 120.768758] cache: parent cpu7 should not be sleeping
[ 120.768809] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1e
[ 120.768880] CPU7 is up
[ 120.773625] ACPI: Waking up from system sleep state S3
[ 120.777624] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 120.777655] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 120.777677] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 120.789736] PM: noirq resume of devices complete after 15.487 msecs
[ 120.812196] PM: early resume of devices complete after 22.448 msecs
[ 120.812297] r8169 0000:05:00.2: System wakeup disabled by ACPI
[ 120.812334] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 120.812544] sd 5:0:0:0: [sda] Starting disk
[ 120.849819] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout
[ 120.900580] r8169 0000:05:00.2 eth0: link down
[ 121.073745] usb 3-7: reset full-speed USB device number 2 using xhci_hcd
[ 121.136506] ata3: SATA link down (SStatus 0 SControl 300)
[ 121.136555] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 121.140301] ata1.00: configured for UDMA/133
[ 121.614678] serio serio1: device_attach() failed for isa0060/serio1 (i8042
AUX0 port), error: -517
[ 121.614680] serio serio2: device_attach() failed for isa0060/serio2 (i8042
AUX1 port), error: -517
[ 121.614681] serio serio3: device_attach() failed for isa0060/serio3 (i8042
AUX2 port), error: -517
[ 121.614682] serio serio4: device_attach() failed for isa0060/serio4 (i8042
AUX3 port), error: -517
[ 122.443085] r8169 0000:05:00.2 eth0: link up
[ 122.533541] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 122.534949] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 122.534950] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 122.534952] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 122.537891] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 122.537893] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 122.537894] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 122.539272] ata6.00: configured for UDMA/133
[ 122.558628] PM: resume of devices complete after 1746.422 msecs
[ 122.566915] usb 3-7:1.0: rebind failed: -517
[ 122.566919] usb 3-7:1.1: rebind failed: -517
[ 122.567057] Restarting tasks ... done.
[ 122.652854] ata6.00: configured for UDMA/133
[ 122.652859] ata6: EH complete
[ 122.658877] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 122.661365] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 122.662206] EXT4-fs (sda9): re-mounted. Opts: commit=0
[ 122.663044] EXT4-fs (sda10): re-mounted. Opts: commit=0
[ 122.711385] Bluetooth: hci0: read Intel version: 3707100180012d0d00
[ 122.744439] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
[ 122.895434] Bluetooth: hci0: Intel Bluetooth firmware patch completed and
activated
