[PATCH] ASoC: mxs-saif: check BUSY bit in hw_params() only if not mclk_in_use

[Mans Rullgard]

If something else, typically a codec, has enabled mclk, the BUSY
bit may be set when hw_params() is called without this being an
error.  This check thus causes intermittent failures to configure
the sound device when used in such a manner.  Fix this by making
the test conditional on !saif->mclk_in_use.

Signed-off-by: Mans Rullgard <m...@mansr.com>
---
 sound/soc/mxs/mxs-saif.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index a6c7b8d87cd2..13631003cb7c 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -418,7 +418,7 @@ static int mxs_saif_hw_params(struct snd_pcm_substream 
*substream,
        }
 
        stat = __raw_readl(saif->base + SAIF_STAT);
-       if (stat & BM_SAIF_STAT_BUSY) {
+       if (!saif->mclk_in_use && (stat & BM_SAIF_STAT_BUSY)) {
                dev_err(cpu_dai->dev, "error: busy\n");
                return -EBUSY;
        }
-- 
2.7.0