From: Bean Huo <bean...@micron.com>

This file is to initial bakvol moduel and scan PEB to find
bakvol PEB while attach ubi device.

Signed-off-by: BeanHuo <bean...@micron.com>
---
 drivers/mtd/ubi/attach.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index 68eea5b..5c38854 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -919,6 +919,15 @@ static int scan_peb(struct ubi_device *ubi, struct 
ubi_attach_info *ai,
        err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
        if (err < 0)
                return err;
+
+#ifdef CONFIG_MTD_UBI_MLC_NAND_BAKVOL
+       /*
+        * Before analyze VID header, call ubi_bakvol_peb_scan to
+        * find out backup block and build the backup log volume first.
+        */
+       ubi_bakvol_peb_scan(ubi, vidh, pnum);
+#endif
+
        switch (err) {
        case 0:
                break;
@@ -995,7 +1004,8 @@ static int scan_peb(struct ubi_device *ubi, struct 
ubi_attach_info *ai,
                *vid = vol_id;
        if (sqnum)
                *sqnum = be64_to_cpu(vidh->sqnum);
-       if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
+       if ((vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID)
+                                       && vol_id != UBI_BACKUP_VOLUME_ID) {
                int lnum = be32_to_cpu(vidh->lnum);
 
                /* Unsupported internal volume */
@@ -1408,6 +1418,12 @@ int ubi_attach(struct ubi_device *ubi, int force_scan)
        if (!ai)
                return -ENOMEM;
 
+#ifdef CONFIG_MTD_UBI_MLC_NAND_BAKVOL
+       err = ubi_bakvol_module_init(ubi);
+       if (err)
+               goto out_ai;
+#endif
+
 #ifdef CONFIG_MTD_UBI_FASTMAP
        /* On small flash devices we disable fastmap in any case. */
        if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
@@ -1449,6 +1465,12 @@ int ubi_attach(struct ubi_device *ubi, int force_scan)
        if (err)
                goto out_ai;
 
+#ifdef CONFIG_MTD_UBI_MLC_NAND_BAKVOL
+       err = ubi_bakvol_module_init_tail(ubi, ai);
+       if (err)
+               goto out_ai;
+#endif
+
        err = ubi_wl_init(ubi, ai);
        if (err)
                goto out_vtbl;
-- 
1.9.1

Reply via email to