From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Mon Jul 3 21:40:10 2006 +0300
Input ads7846: optionally leave Vref on during differential measurements
On some LCDs leaving the Vref on provides much better readings.
Signed-off-by: Jarkko Oikarinen <[EMAIL PROTECTED]>
Signed-off-by: Imre Deak <[EMAIL PROTECTED]>
Signed-off-by: Juha Yrjola <[EMAIL PROTECTED]>
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Index: osk/include/linux/spi/ads7846.h
===================================================================
--- osk.orig/include/linux/spi/ads7846.h 2006-12-22 11:08:41.000000000
-0800
+++ osk/include/linux/spi/ads7846.h 2006-12-22 11:08:43.000000000 -0800
@@ -14,6 +14,8 @@ enum ads7846_filter {
struct ads7846_platform_data {
u16 model; /* 7843, 7845, 7846. */
u16 vref_delay_usecs; /* 0 for external vref; etc */
+ int keep_vref_on : 1; /* set to keep vref on for differential
+ * measurements as well */
u16 x_plate_ohms;
u16 y_plate_ohms;
Index: osk/drivers/input/touchscreen/ads7846.c
===================================================================
--- osk.orig/drivers/input/touchscreen/ads7846.c 2006-12-22
11:08:41.000000000 -0800
+++ osk/drivers/input/touchscreen/ads7846.c 2006-12-22 11:08:43.000000000
-0800
@@ -145,15 +145,16 @@ struct ads7846 {
#define MAX_12BIT ((1<<12)-1)
/* leave ADC powered up (disables penirq) between differential samples */
-#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
- | ADS_12_BIT | ADS_DFR)
+#define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
+ | ADS_12_BIT | ADS_DFR | \
+ (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
-#define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON)
-#define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
-#define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
+#define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref))
+#define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref))
+#define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref))
-#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_ADC_ON)
-#define PWRDOWN (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) /* LAST */
+#define READ_X(vref) (READ_12BIT_DFR(x, 1, vref))
+#define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */
/* single-ended samples need to first power up reference voltage;
* we leave both ADC and VREF powered
@@ -161,8 +162,8 @@ struct ads7846 {
#define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
| ADS_12_BIT | ADS_SER)
-#define REF_ON (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
-#define REF_OFF (READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
+#define REF_ON (READ_12BIT_DFR(x, 1, 1))
+#define REF_OFF (READ_12BIT_DFR(y, 0, 0))
/*--------------------------------------------------------------------------*/
@@ -670,6 +671,7 @@ static int __devinit ads7846_probe(struc
struct ads7846_platform_data *pdata = spi->dev.platform_data;
struct spi_message *m;
struct spi_transfer *x;
+ int vref;
int err;
if (!spi->irq) {
@@ -767,6 +769,8 @@ static int __devinit ads7846_probe(struc
input_set_abs_params(input_dev, ABS_PRESSURE,
pdata->pressure_min, pdata->pressure_max, 0, 0);
+ vref = pdata->keep_vref_on;
+
/* set up the transfers to read touchscreen state; this assumes we
* use formula #2 for pressure, not #3.
*/
@@ -776,7 +780,7 @@ static int __devinit ads7846_probe(struc
spi_message_init(m);
/* y- still on; turn on only y+ (and ADC) */
- ts->read_y = READ_Y;
+ ts->read_y = READ_Y(vref);
x->tx_buf = &ts->read_y;
x->len = 1;
spi_message_add_tail(x, m);
@@ -794,7 +798,7 @@ static int __devinit ads7846_probe(struc
/* turn y- off, x+ on, then leave in lowpower */
x++;
- ts->read_x = READ_X;
+ ts->read_x = READ_X(vref);
x->tx_buf = &ts->read_x;
x->len = 1;
spi_message_add_tail(x, m);
@@ -813,7 +817,7 @@ static int __devinit ads7846_probe(struc
spi_message_init(m);
x++;
- ts->read_z1 = READ_Z1;
+ ts->read_z1 = READ_Z1(vref);
x->tx_buf = &ts->read_z1;
x->len = 1;
spi_message_add_tail(x, m);
@@ -830,7 +834,7 @@ static int __devinit ads7846_probe(struc
spi_message_init(m);
x++;
- ts->read_z2 = READ_Z2;
+ ts->read_z2 = READ_Z2(vref);
x->tx_buf = &ts->read_z2;
x->len = 1;
spi_message_add_tail(x, m);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
