early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
input_data: 0x01c20079
input_len: 0x00e03acd
output: 0x01000000
output_len: 0x01a110f4
run_size: 0x021ad715
KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
[    0.000000] Linux version 4.5.0-rc1-00021-g78b8dba (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #107 Tue Jan 26 23:05:03 CST 2016
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [c00f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x099fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x095ca000, 0x095cafff] PGTABLE
[    0.000000] BRK [0x095cb000, 0x095cbfff] PGTABLE
[    0.000000] BRK [0x095cc000, 0x095ccfff] PGTABLE
[    0.000000] BRK [0x095cd000, 0x095cdfff] PGTABLE
[    0.000000] BRK [0x095ce000, 0x095cefff] PGTABLE
[    0.000000] BRK [0x095cf000, 0x095cffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1451e000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1451c001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 6923826079 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat c89bcdc0, node_mem_map d401b028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 860 pages used for memmap
[    0.000000]   Normal zone: 88032 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 86fea80
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91130
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-8/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-s0-201604-78b8dbaa5715c56d5bc6e9d361856f8d92fe490c-20160126-108904-l5r34w-1.yaml ARCH=i386 kconfig=i386-randconfig-s0-201604 branch=linux-devel/devel-catchup-201601262142 commit=78b8dbaa5715c56d5bc6e9d361856f8d92fe490c BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/vmlinuz-4.5.0-rc1-00021-g78b8dba max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-8::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 295420K/368120K available (12824K kernel code, 3299K rwdata, 4340K rodata, 952K init, 10788K bss, 72700K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8d000 - 0xfffff000   ( 456 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd6fe0000 - 0xffbfe000   ( 652 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd67e0000   ( 359 MB)
[    0.000000]       .init : 0xc8a05000 - 0xc8af3000   ( 952 kB)
[    0.000000]       .data : 0xc828636e - 0xc8a03c80   (7670 kB)
[    0.000000]       .text : 0xc7600000 - 0xc828636e   (12824 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d3ddc000 soft=d3dde000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.5.0-rc1-00021-g78b8dba (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #107 Tue Jan 26 23:05:03 CST 2016
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [c00f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x099fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x095ca000, 0x095cafff] PGTABLE
[    0.000000] BRK [0x095cb000, 0x095cbfff] PGTABLE
[    0.000000] BRK [0x095cc000, 0x095ccfff] PGTABLE
[    0.000000] BRK [0x095cd000, 0x095cdfff] PGTABLE
[    0.000000] BRK [0x095ce000, 0x095cefff] PGTABLE
[    0.000000] BRK [0x095cf000, 0x095cffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1451e000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1451c001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 6923826079 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat c89bcdc0, node_mem_map d401b028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 860 pages used for memmap
[    0.000000]   Normal zone: 88032 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 86fea80
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91130
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-8/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-s0-201604-78b8dbaa5715c56d5bc6e9d361856f8d92fe490c-20160126-108904-l5r34w-1.yaml ARCH=i386 kconfig=i386-randconfig-s0-201604 branch=linux-devel/devel-catchup-201601262142 commit=78b8dbaa5715c56d5bc6e9d361856f8d92fe490c BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/vmlinuz-4.5.0-rc1-00021-g78b8dba max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-8::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 295420K/368120K available (12824K kernel code, 3299K rwdata, 4340K rodata, 952K init, 10788K bss, 72700K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8d000 - 0xfffff000   ( 456 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd6fe0000 - 0xffbfe000   ( 652 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd67e0000   ( 359 MB)
[    0.000000]       .init : 0xc8a05000 - 0xc8af3000   ( 952 kB)
[    0.000000]       .data : 0xc828636e - 0xc8a03c80   (7670 kB)
[    0.000000]       .text : 0xc7600000 - 0xc828636e   (12824 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d3ddc000 soft=d3dde000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.215465] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.216687] pid_max: default: 32768 minimum: 301
[    0.217368] ACPI: Core revision 20160108
[    0.224096] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.224950] 
[    0.225392] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.226261] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.230796] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.231536] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.232309] CPU: Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x1)
[    0.239259] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[    0.241252] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.242019] enabled ExtINT on CPU#0
[    0.243276] ENABLING IO-APIC IRQs
[    0.243784] init IO_APIC IRQs
[    0.244285]  apic 0 pin 0 not connected
[    0.244875] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.245964] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.247054] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.248158] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.249262] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.250354] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.251455] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.252545] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.253646] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.254748] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.255842] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.256939] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.258034] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.259167] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.260283] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.261389]  apic 0 pin 16 not connected
[    0.261947]  apic 0 pin 17 not connected
[    0.262506]  apic 0 pin 18 not connected
[    0.263077]  apic 0 pin 19 not connected
[    0.263636]  apic 0 pin 20 not connected
[    0.264218]  apic 0 pin 21 not connected
[    0.264771]  apic 0 pin 22 not connected
[    0.265350]  apic 0 pin 23 not connected
[    0.266038] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.266830] TSC deadline timer enabled
[    0.267843] devtmpfs: initialized
[    0.268908] gcov: version magic: 0x3530322a
[    0.271507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.273019] xor: automatically using best checksumming function:
[    0.283876]    avx       :  5036.000 MB/sec
[    0.284495] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    0.285878] regulator-dummy: no parameters
[    0.287014] NET: Registered protocol family 16
[    0.288494] EISA bus registered
[    0.289039] cpuidle: using governor menu
[    0.290045] ACPI: bus type PCI registered
[    0.291090] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.292101] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    0.292874] PCI: Using configuration type 1 for base access
[    0.317871] raid6: mmxx1    gen()   761 MB/s
[    0.335029] raid6: mmxx2    gen()   820 MB/s
[    0.352203] raid6: sse1x1   gen()   628 MB/s
[    0.369423] raid6: sse1x2   gen()   640 MB/s
[    0.386510] raid6: sse2x1   gen()  1199 MB/s
[    0.403647] raid6: sse2x1   xor()  1255 MB/s
[    0.420792] raid6: sse2x2   gen()  1582 MB/s
[    0.437943] raid6: sse2x2   xor()  1347 MB/s
[    0.438548] raid6: using algorithm sse2x2 gen() 1582 MB/s
[    0.439257] raid6: .... xor() 1347 MB/s, rmw enabled
[    0.439908] raid6: using ssse3x1 recovery algorithm
[    0.440891] ACPI: Added _OSI(Module Device)
[    0.441486] ACPI: Added _OSI(Processor Device)
[    0.442105] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.442736] ACPI: Added _OSI(Processor Aggregator Device)
[    0.448641] ACPI: Interpreter enabled
[    0.449243] ACPI: (supports S0 S3 S5)
[    0.449859] ACPI: Using IOAPIC for interrupt routing
[    0.450576] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.468352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.469163] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.469885] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.470742] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.472406] PCI host bridge to bus 0000:00
[    0.472987] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.473823] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.474651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.475693] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    0.476721] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.477501] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.479124] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.480754] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.484085] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.485888] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.486747] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.487555] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.488417] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.489803] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.490919] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.492188] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.493693] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.497782] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.501239] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.507753] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.511211] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.514073] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.516404] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.524251] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.526840] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.528707] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.533823] pci_bus 0000:00: on NUMA node 0
[    0.536826] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.538183] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.539515] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.540840] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.542017] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.543615] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.545428] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.546228] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.547552] vgaarb: loaded
[    0.547999] vgaarb: bridge control possible 0000:00:02.0
[    0.549112] media: Linux media interface: v0.10
[    0.551113] PCI: Using ACPI for IRQ routing
[    0.552248] PCI: pci_cache_line_size set to 64 bytes
[    0.553722] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.555178] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    0.558910] clocksource: Switched to clocksource kvm-clock
[    0.568830] Warning: could not register annotated branches stats
[    0.696980] pnp: PnP ACPI init
[    0.698474] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.699688] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.700820] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.701955] pnp 00:03: [dma 2]
[    0.702581] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.703897] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.705189] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.707256] pnp: PnP ACPI: found 6 devices
[    0.968486] mdacon: MDA with 8K of memory detected.
[    0.968655] Console: switching consoles 13-16 to MDA-2
[    1.005037] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.007037] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.008301] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.009725] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.011251] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    1.030200] NET: Registered protocol family 1
[    1.031355] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.032782] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.034012] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.034828] pci 0000:00:02.0: Video device with shadowed ROM
[    1.035594] PCI: CLS 0 bytes, default 64
[    1.036606] Unpacking initramfs...
[    2.958090] debug: unmapping init [mem 0xd451e000-0xd67dffff]
[    2.975572] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.976419] apm: overridden by ACPI.
[    2.978237] cryptomgr_test (19) used greatest stack depth: 7176 bytes left
[    2.980225] futex hash table entries: 256 (order: 1, 13312 bytes)
[    3.150866] Initialise system trusted keyring
[    3.162581] zbud: loaded
[    3.163742] fuse init (API version 7.24)
[    3.165009] SGI XFS with security attributes, realtime, no debug enabled
[    3.172444] gfs2: GFS2 installed
[    3.180152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.181232] io scheduler noop registered (default)
[    3.181878] start plist test
[    3.189757] end plist test
[    3.190588] Console: switching consoles 13-16 to MDA-2
[    3.191811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.192878] ACPI: Power Button [PWRF]
[    3.193630] Warning: Processor Platform Limit event detected, but not handled.
[    3.194646] Consider compiling CPUfreq support into your kernel.
[    3.196341] r3964: Philips r3964 Driver $Revision: 1.10 $
[    3.197073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.221399] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.238606] Non-volatile memory driver v1.3
[    3.239654] parport_pc 00:04: reported by Plug and Play ACPI
[    3.240621] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.359050] Failed to find cpu0 device node
[    3.359649] Unable to detect cache hierarchy from DT for CPU 0
[    3.361090] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.363071] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.363764] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.366665] rtc rtc0: alarm rollover: day
[    3.367263] rtc rtc0: invalid alarm value: 1900-1-27 0:0:0
[    3.368094] rtc-test rtc-test.0: rtc core: registered test as rtc0
[    3.369027] rtc rtc1: alarm rollover: day
[    3.369592] rtc rtc1: invalid alarm value: 1900-1-27 0:0:0
[    3.370429] rtc-test rtc-test.1: rtc core: registered test as rtc1
[    3.371347] smssdio: Siano SMS1xxx SDIO driver
[    3.371976] smssdio: Copyright Pierre Ossman
[    3.372610] Driver for 1-wire Dallas network protocol.
[    3.373417] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    3.374550] advantechwdt: WDT driver for Advantech single board computer initialising
[    3.377027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.379815] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[    3.381469] ib700wdt: WDT driver for IB700 single board computer initialising
[    3.383355] ib700wdt: START method I/O 443 is not available
[    3.384562] ib700wdt: probe of ib700wdt failed with error -5
[    3.385690] sc1200wdt: build 20020303
[    3.386742] sc1200wdt: io parameter must be specified
[    3.387953] sbc8360: failed to register misc device
[    3.389208] sbc7240_wdt: I/O address 0x0443 already in use
[    3.390595] cpu5wdt: misc_register failed
[    3.391761] w83877f_wdt: I/O address 0x0443 already in use
[    3.393116] machzwd: MachZ ZF-Logic Watchdog driver initializing
[    3.394536] machzwd: no ZF-Logic found
[    3.395671] md: linear personality registered for level -1
[    3.397053] md: raid0 personality registered for level 0
[    3.398355] md: raid1 personality registered for level 1
[    3.399702] md: raid10 personality registered for level 10
[    3.401450] md: raid6 personality registered for level 6
[    3.402666] md: raid5 personality registered for level 5
[    3.403853] md: raid4 personality registered for level 4
[    3.406279] device-mapper: uevent: version 1.0.3
[    3.407380] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.409151] device-mapper: raid: Loading target version 1.7.0
[    3.410616] ledtrig-cpu: registered to indicate activity on CPUs
[    3.411481] hidraw: raw HID events driver (C) Jiri Kosina
[    3.413681] input: Speakup as /devices/virtual/input/input3
[    3.414881] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    3.415939] speakup 3.1.6: initialized
[    3.416495] synth name on entry is: (null)
[    3.417490] dgap: dgap-1.3-16, Digi International Part Number 40002347_C
[    3.418337] dgap: For the tools package please visit http://www.digi.com
[    3.420855] ... APIC ID:      00000000 (0)
[    3.421449] ... APIC VERSION: 01050014
[    3.422014] 0000000000000000000000000000000000000000000000000000000000000000
[    3.423864] 0000000000000000000000000000000000000000000000000000000000000000
[    3.425943] 0000000000000000000000000000000000000000000000000000000000008000
[    3.427372] 
[    3.427741] number of MP IRQ sources: 15.
[    3.428585] number of IO-APIC #0 registers: 24.
[    3.429235] testing the IO APIC.......................
[    3.429987] IO APIC #0......
[    3.430454] .... register #00: 00000000
[    3.431023] .......    : physical APIC id: 00
[    3.431621] .......    : Delivery Type: 0
[    3.432203] .......    : LTS          : 0
[    3.432767] .... register #01: 00170011
[    3.433338] .......     : max redirection entries: 17
[    3.434020] .......     : PRQ implemented: 0
[    3.434613] .......     : IO APIC version: 11
[    3.435227] .... register #02: 00000000
[    3.435775] .......     : arbitration: 00
[    3.436355] .... IRQ redirection table:
[    3.436925] IOAPIC 0:
[    3.437349]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.438423]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    3.439517]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    3.440602]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.441695]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.442775]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.443859]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.444947]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    3.446023]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.447104]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    3.448181]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.449268]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.450356]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    3.451433]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.452519]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.453597]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.454677]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.455763]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.456858]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.457944]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.459355]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.460440]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.461515]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.462597]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.463686] IRQ to pin mappings:
[    3.464199] IRQ0 -> 0:2
[    3.464744] IRQ1 -> 0:1
[    3.465309] IRQ3 -> 0:3
[    3.465857] IRQ4 -> 0:4
[    3.466427] IRQ5 -> 0:5
[    3.466983] IRQ6 -> 0:6
[    3.467528] IRQ7 -> 0:7
[    3.468084] IRQ8 -> 0:8
[    3.468628] IRQ9 -> 0:9
[    3.469190] IRQ10 -> 0:10
[    3.469748] IRQ11 -> 0:11
[    3.470328] IRQ12 -> 0:12
[    3.470880] IRQ13 -> 0:13
[    3.471462] IRQ14 -> 0:14
[    3.472039] IRQ15 -> 0:15
[    3.472599] .................................... done.
[    3.473310] Using IPI Shortcut mode
[    3.475935] Loading compiled-in X.509 certificates
[    3.478516] cryptomgr_probe (83) used greatest stack depth: 6956 bytes left
[    3.479474] Key type trusted registered
[    3.481053] Key type encrypted registered
[    3.484195] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    3.497994] ### dt-test ### start of unittest - you will see error messages
[    3.499239] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    3.500713] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    3.502187] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    3.503057] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    3.503924] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    3.504995] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    3.982145] tsc: Refined TSC clocksource calibration: 2693.505 MHz
[    3.983012] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d346f670a, max_idle_ns: 440795255135 ns
[  240.329025] INFO: task swapper:1 blocked for more than 120 seconds.
[  240.333860]       Not tainted 4.5.0-rc1-00021-g78b8dba #107
[  240.335123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.336933] swapper         D 00000000  5856     1      0 0x00000000
[  240.338565]  d3dffe00 00000046 cab95a00 00000000 d3dffe40 c8991cec c88912e0 00000000
[  240.341284]  00000000 cab95a00 d3e10000 c76a1c90 d3e00000 d3e10000 d3dffe10 c827847b
[  240.343539]  c76a1c90 c8991cc0 d3dffe18 c827891f d3dffe5c c827e8b6 00000000 00000001
[  240.345131] Call Trace:
[  240.345609]  [<c76a1c90>] ? native_save_fl+0x30/0x30
[  240.346306]  [<c827847b>] schedule+0x7b/0x180
[  240.346923]  [<c76a1c90>] ? native_save_fl+0x30/0x30
[  240.347597]  [<c827891f>] schedule_preempt_disabled+0x2f/0x60
[  240.348429]  [<c827e8b6>] mutex_lock_nested+0x446/0x940
[  240.349156]  [<c8137825>] ? of_changeset_apply+0x25/0x70
[  240.349850]  [<c8137825>] ? of_changeset_apply+0x25/0x70
[  240.350564]  [<c8137825>] of_changeset_apply+0x25/0x70
[  240.351278]  [<c8a95a55>] of_unittest+0xde4/0x16ee
[  240.351945]  [<c78f225a>] ? kfree+0x54a/0x680
[  240.352563]  [<c81cd6ab>] ? add_sysfs_fw_map_entry+0xad/0x102
[  240.353324]  [<c760219d>] ? do_one_initcall+0xcd/0x480
[  240.354021]  [<c8a94c71>] ? of_unittest_platform_populate+0x603/0x603
[  240.354830]  [<c76021d6>] do_one_initcall+0x106/0x480
[  240.355522]  [<c8a94c71>] ? of_unittest_platform_populate+0x603/0x603
[  240.356352]  [<c8a06e6d>] ? kernel_init_freeable+0x422/0x5be
[  240.357095]  [<c8a06e9b>] kernel_init_freeable+0x450/0x5be
[  240.357807]  [<c827204e>] kernel_init+0x1e/0x200
[  240.358462]  [<c77207ff>] ? schedule_tail+0x1f/0xc0
[  240.359153]  [<c8284348>] ret_from_kernel_thread+0x20/0x34
[  240.359868]  [<c8272030>] ? rest_init+0x160/0x160
[  240.360531] 2 locks held by swapper/1:
[  240.361090]  #0:  (of_mutex){......}, at: [<c8a95a40>] of_unittest+0xdcf/0x16ee
[  240.362439]  #1:  (of_mutex){......}, at: [<c8137825>] of_changeset_apply+0x25/0x70
[  360.362993] INFO: task swapper:1 blocked for more than 120 seconds.
[  360.367053]       Not tainted 4.5.0-rc1-00021-g78b8dba #107
[  360.368384] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.370464] swapper         D 00000000  5856     1      0 0x00000000
[  360.372220]  d3dffe00 00000046 cab95a00 00000000 d3dffe40 c8991cec c88912e0 00000000
[  360.376046]  00000000 cab95a00 d3e10000 c76a1c90 d3e00000 d3e10000 d3dffe10 c827847b
[  360.383960]  c76a1c90 c8991cc0 d3dffe18 c827891f d3dffe5c c827e8b6 00000000 00000001
[  360.386894] Call Trace:
[  360.387688]  [<c76a1c90>] ? native_save_fl+0x30/0x30
[  360.388936]  [<c827847b>] schedule+0x7b/0x180
[  360.391087]  [<c76a1c90>] ? native_save_fl+0x30/0x30
[  360.392315]  [<c827891f>] schedule_preempt_disabled+0x2f/0x60
[  360.393739]  [<c827e8b6>] mutex_lock_nested+0x446/0x940
[  360.395015]  [<c8137825>] ? of_changeset_apply+0x25/0x70
[  360.396296]  [<c8137825>] ? of_changeset_apply+0x25/0x70
[  360.397643]  [<c8137825>] of_changeset_apply+0x25/0x70
[  360.398905]  [<c8a95a55>] of_unittest+0xde4/0x16ee
[  360.400138]  [<c78f225a>] ? kfree+0x54a/0x680
[  360.401252]  [<c81cd6ab>] ? add_sysfs_fw_map_entry+0xad/0x102
[  360.402666]  [<c760219d>] ? do_one_initcall+0xcd/0x480
[  360.403926]  [<c8a94c71>] ? of_unittest_platform_populate+0x603/0x603
[  360.405410]  [<c76021d6>] do_one_initcall+0x106/0x480
[  360.406710]  [<c8a94c71>] ? of_unittest_platform_populate+0x603/0x603
[  360.408193]  [<c8a06e6d>] ? kernel_init_freeable+0x422/0x5be
[  360.409587]  [<c8a06e9b>] kernel_init_freeable+0x450/0x5be
[  360.410902]  [<c827204e>] kernel_init+0x1e/0x200
[  360.412094]  [<c77207ff>] ? schedule_tail+0x1f/0xc0
[  360.413298]  [<c8284348>] ret_from_kernel_thread+0x20/0x34
[  360.414665]  [<c8272030>] ? rest_init+0x160/0x160
[  360.415841] 2 locks held by swapper/1:
[  360.416856]  #0:  (of_mutex){......}, at: [<c8a95a40>] of_unittest+0xdcf/0x16ee
[  360.419407]  #1:  (of_mutex){......}, at: [<c8137825>] of_changeset_apply+0x25/0x70

Elapsed time: 440
BUG: kernel boot hang
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /pkg/linux/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/vmlinuz-4.5.0-rc1-00021-g78b8dba -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-8/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-s0-201604-78b8dbaa5715c56d5bc6e9d361856f8d92fe490c-20160126-108904-l5r34w-1.yaml ARCH=i386 kconfig=i386-randconfig-s0-201604 branch=linux-devel/devel-catchup-201601262142 commit=78b8dbaa5715c56d5bc6e9d361856f8d92fe490c BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/vmlinuz-4.5.0-rc1-00021-g78b8dba max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201604/gcc-5/78b8dbaa5715c56d5bc6e9d361856f8d92fe490c/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-8::dhcp drbd.minor_count=8'  -initrd /fs/sdd1/initrd-vm-vp-quantal-i386-8 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-8 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-8 -daemonize -display none -monitor null 
