Add tuning clk for emmc and sdmmc, otherwise I get
the following failure while enabling mmc-hs200-1_8v.
dwmmc_rockchip ff0f0000.dwmmc: Tuning clock (sample_clk) not defined.
mmc0: tuning execution failed
mmc0: error -5 whilst initialising MMC card
With it
dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 170
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 M8G1GC 7.28 GiB
Signed-off-by: Shawn Lin <shawn....@rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 122777b..1cf3cf7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -231,8 +231,9 @@
compatible = "rockchip,rk3368-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0c0000 0x0 0x4000>;
clock-freq-min-max = <400000 150000000>;
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
- clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -256,6 +257,9 @@
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.3.7
