early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 4.4.0-rc4-00001-g22bf2bb (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #1 SMP Mon Dec 14 15:02:21 CST 2015
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [400f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x03ffffff]
[    0.000000] Base memory trampoline at [4009b000] 9b000 size 16384
[    0.000000] BRK [0x033eb000, 0x033ebfff] PGTABLE
[    0.000000] BRK [0x033ec000, 0x033ecfff] PGTABLE
[    0.000000] BRK [0x033ed000, 0x033edfff] PGTABLE
[    0.000000] BRK [0x033ee000, 0x033eefff] PGTABLE
[    0.000000] BRK [0x033ef000, 0x033effff] PGTABLE
[    0.000000] BRK [0x033f0000, 0x033f0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14e8e000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000167dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14e88000-0x14e89fff]
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000] max_low_pfn = 167e0, highstart_pfn = 167e0
[    0.000000] Low memory ends at vaddr 567e0000
[    0.000000] High memory starts at vaddr 567e0000
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14e87001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 5830252968 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Node: 0, start_pfn: 1, end_pfn: 9f
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   0 
[    0.000000] Node: 0, start_pfn: 100, end_pfn: 167e0
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   0 4000 8000 c000 10000 14000 
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat 54e88000, node_mem_map 54aa2020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 688 pages used for memmap
[    0.000000]   Normal zone: 88032 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 334 pages/cpu @54954000 s1346736 r0 d21328 u1368064
[    0.000000] pcpu-alloc: s1346736 r0 d21328 u1368064 alloc=334*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 14956c00
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91310
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-12/bisect_boot-1-quantal-core-i386.cgz-i386-randconfig-x0-12141127-22bf2bb019c7f92cda32c46b95715b0b208052d0-20151214-1580-pcbj5u-0.yaml ARCH=i386 kconfig=i386-randconfig-x0-12141127 branch=linux-devel/devel-catchup-201512141236 commit=22bf2bb019c7f92cda32c46b95715b0b208052d0 BOOT_IMAGE=/pkg/linux/i386-randconfig-x0-12141127/gcc-5/22bf2bb019c7f92cda32c46b95715b0b208052d0/vmlinuz-4.4.0-rc4-00001-g22bf2bb max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-x0-12141127/gcc-5/22bf2bb019c7f92cda32c46b95715b0b208052d0/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-12::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 300076K/368120K available (13805K kernel code, 966K rwdata, 4828K rodata, 1996K init, 15008K bss, 68044K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0x56fe0000 - 0xff9fe000   (2698 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x567e0000   ( 359 MB)
[    0.000000]       .init : 0x42327000 - 0x4251a000   (1996 kB)
[    0.000000]       .data : 0x41d7b7b4 - 0x42325860   (5800 kB)
[    0.000000]       .text : 0x41000000 - 0x41d7b7b4   (13805 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:48 16
[    0.000000] CPU 0 irqstacks, hard=54404000 soft=54406000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.127607] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.128427] pid_max: default: 32768 minimum: 301
[    0.128856] ACPI: Core revision 20150930
[    0.134553] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.135163] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.135730] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.136622] Initializing cgroup subsys freezer
[    0.137074] Initializing cgroup subsys net_cls
[    0.137499] Initializing cgroup subsys perf_event
[    0.137957] Initializing cgroup subsys net_prio
[    0.138447] mce: CPU supports 10 MCE banks
[    0.138872] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.139330] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.156061] debug: unmapping init [mem 0x4251a000-0x42522fff]
[    0.160332] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.161065] enabled ExtINT on CPU#0
[    0.162367] ENABLING IO-APIC IRQs
[    0.162860] init IO_APIC IRQs
[    0.163231]  apic 0 pin 0 not connected
[    0.163649] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.164588] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.165552] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.166558] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.167480] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.168296] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.169303] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.170160] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.171007] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.171869] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.172894] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.173793] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.174692] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.175699] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.176668] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.177657]  apic 0 pin 16 not connected
[    0.178136]  apic 0 pin 17 not connected
[    0.178577]  apic 0 pin 18 not connected
[    0.179078]  apic 0 pin 19 not connected
[    0.179539]  apic 0 pin 20 not connected
[    0.179960]  apic 0 pin 21 not connected
[    0.180452]  apic 0 pin 22 not connected
[    0.180946]  apic 0 pin 23 not connected
[    0.181445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.182155] TSC deadline timer enabled
[    0.182574] smpboot: CPU0: Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x1)
[    0.183597] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[    0.185114] x86: Booted up 1 node, 1 CPUs
[    0.185566] ----------------
[    0.185847] | NMI testsuite:
[    0.186194] --------------------
[    0.186577]   remote IPI:  ok  |
[    0.186930]    local IPI:  ok  |
[    0.187374] --------------------
[    0.187673] Good, all   2 testcases passed! |
[    0.188136] ---------------------------------
[    0.188560] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.189695] devtmpfs: initialized
[    0.192621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.193809] pinctrl core: initialized pinctrl subsystem
[    0.195093] NET: Registered protocol family 16
[    0.197095] EISA bus registered
[    0.197493] cpuidle: using governor ladder
[    0.197910] cpuidle: using governor menu
[    0.199488] ACPI: bus type PCI registered
[    0.199859] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.200877] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.201612] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    0.202309] PCI: Using configuration type 1 for base access
[    0.222473] ACPI: Added _OSI(Module Device)
[    0.223059] ACPI: Added _OSI(Processor Device)
[    0.223637] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.224264] ACPI: Added _OSI(Processor Aggregator Device)
[    0.231724] ACPI: Interpreter enabled
[    0.232268] ACPI: (supports S0 S5)
[    0.232741] ACPI: Using IOAPIC for interrupt routing
[    0.233500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.245540] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.246074] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.246564] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.247124] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.248416] acpiphp: Slot [3] registered
[    0.248803] acpiphp: Slot [4] registered
[    0.249214] acpiphp: Slot [5] registered
[    0.249641] acpiphp: Slot [6] registered
[    0.250021] acpiphp: Slot [7] registered
[    0.250418] acpiphp: Slot [8] registered
[    0.250819] acpiphp: Slot [9] registered
[    0.251251] acpiphp: Slot [10] registered
[    0.251719] acpiphp: Slot [11] registered
[    0.252127] acpiphp: Slot [12] registered
[    0.252523] acpiphp: Slot [13] registered
[    0.252923] acpiphp: Slot [14] registered
[    0.253318] acpiphp: Slot [15] registered
[    0.253756] acpiphp: Slot [16] registered
[    0.254159] acpiphp: Slot [17] registered
[    0.254588] acpiphp: Slot [18] registered
[    0.254972] acpiphp: Slot [19] registered
[    0.255396] acpiphp: Slot [20] registered
[    0.255786] acpiphp: Slot [21] registered
[    0.256174] acpiphp: Slot [22] registered
[    0.256627] acpiphp: Slot [23] registered
[    0.257021] acpiphp: Slot [24] registered
[    0.257474] acpiphp: Slot [25] registered
[    0.257877] acpiphp: Slot [26] registered
[    0.258316] acpiphp: Slot [27] registered
[    0.258705] acpiphp: Slot [28] registered
[    0.259108] acpiphp: Slot [29] registered
[    0.259536] acpiphp: Slot [30] registered
[    0.259953] acpiphp: Slot [31] registered
[    0.260323] PCI host bridge to bus 0000:00
[    0.260691] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.261283] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.261865] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.262476] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    0.263084] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.263598] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.264674] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.265776] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.268943] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.270532] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.271165] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.271735] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.272324] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.273225] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.274079] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.274702] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.275709] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.278050] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.280592] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.285651] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.286612] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.288464] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.289689] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.293657] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.294614] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.295644] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.300077] pci_bus 0000:00: on NUMA node 0
[    0.301667] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.302552] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.303408] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.304257] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.304925] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.306000] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.307175] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.307663] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.308347] vgaarb: loaded
[    0.308601] vgaarb: bridge control possible 0000:00:02.0
[    0.310507] ACPI: bus type USB registered
[    0.311178] usbcore: registered new interface driver usbfs
[    0.312167] usbcore: registered new interface driver hub
[    0.312905] usbcore: registered new device driver usb
[    0.313999] pps_core: LinuxPPS API ver. 1 registered
[    0.314763] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.315974] PTP clock support registered
[    0.316602] EDAC MC: Ver: 3.0.0
[    0.317416] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[    0.318545] wmi: Mapper loaded
[    0.319193] PCI: Using ACPI for IRQ routing
[    0.319876] PCI: pci_cache_line_size set to 64 bytes
[    0.320755] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.321810] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    0.323340] NET: Registered protocol family 23
[    0.324104] Bluetooth: Core ver 2.21
[    0.324697] NET: Registered protocol family 31
[    0.325322] Bluetooth: HCI device and connection manager initialized
[    0.326157] Bluetooth: HCI socket layer initialized
[    0.326928] Bluetooth: L2CAP socket layer initialized
[    0.327654] Bluetooth: SCO socket layer initialized
[    0.328354] NET: Registered protocol family 8
[    0.328914] NET: Registered protocol family 20
[    0.330078] nfc: nfc_init: NFC Core ver 0.1
[    0.330727] NET: Registered protocol family 39
[    0.332624] clocksource: Switched to clocksource kvm-clock
[    0.333808] FS-Cache: Loaded
[    0.334289] pnp: PnP ACPI init
[    0.334966] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.336077] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.337144] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.338218] pnp 00:03: [dma 2]
[    0.338833] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.339936] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.341170] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.343168] pnp: PnP ACPI: found 6 devices
[    0.343779] PnPBIOS: Disabled by ACPI PNP
[    0.380522] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.382012] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.382909] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.383804] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.384788] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    0.385824] NET: Registered protocol family 2
[    0.386952] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.387950] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[    0.389008] TCP: Hash tables configured (established 4096 bind 4096)
[    0.389971] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.390916] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.391881] NET: Registered protocol family 1
[    0.392392] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.393069] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.393729] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.394426] pci 0000:00:02.0: Video device with shadowed ROM
[    0.395078] PCI: CLS 0 bytes, default 64
[    0.395719] Unpacking initramfs...
[    1.596288] debug: unmapping init [mem 0x54e8e000-0x567dffff]
[    1.597868] kvm: no hardware support
[    1.598200] has_svm: not amd
[    1.598496] kvm: no hardware support
[    1.612288] cryptomgr_test (19) used greatest stack depth: 7360 bytes left
[    1.613655] cryptomgr_test (30) used greatest stack depth: 7176 bytes left
[    1.614308] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    1.616026] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.617439] VFS: Disk quotas dquot_6.6.0
[    1.617827] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.618786] DLM installed
[    1.619087] fuse init (API version 7.23)
[    1.623853] NET: Registered protocol family 38
[    1.624253] test_hexdump: Running tests...
[    1.624810] test_hexdump: Len: 2 rc: 2 strlen: 1
[    1.625203] test_hexdump: Result: 'b'
[    1.625667] test_firmware: interface ready
[    1.626043] Running rhashtable test nelem=8, max_size=65536, shrinking=0
[    1.626608] Test 00:
[    1.627932]   Adding 50000 keys
[    1.681088]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.718129]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.718830]   Deleting 50000 keys
[    1.759259]   Duration of test: 131028356 ns
[    1.759878] Test 01:
[    1.761168]   Adding 50000 keys
[    1.840682]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.892110]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.893075]   Deleting 50000 keys
[    1.933472]   Duration of test: 171935584 ns
[    1.934090] Test 02:
[    1.935434]   Adding 50000 keys
[    2.012454]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.065194]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.066365]   Deleting 50000 keys
[    2.108592]   Duration of test: 172751526 ns
[    2.109251] Test 03:
[    2.110591]   Adding 50000 keys
[    2.191130]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.245306]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.246469]   Deleting 50000 keys
[    2.287587]   Duration of test: 176576458 ns
[    2.288191] Average test time: 163072981
[    2.288637] Testing concurrent rhashtable access from 10 threads
[    6.319698] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d349e8249, max_idle_ns: 440795288087 ns
[    6.772563] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[    6.773350] cfg80211: Restoring regulatory settings
[    6.773768] cfg80211: Kicking the queue
[    7.074835] rhashtable_thra (89) used greatest stack depth: 7120 bytes left
[    7.075472] rhashtable_thra (91) used greatest stack depth: 7116 bytes left
[    7.076150] Started 10 threads, 0 failed
[    7.077440] test_printf: all 111 tests passed
[    7.078168] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    7.078590] crc32: self tests passed, processed 225944 bytes in 162272 nsec
[    7.079326] crc32c: CRC_LE_BITS = 64
[    7.079631] crc32c: self tests passed, processed 225944 bytes in 82057 nsec
[    7.092403] crc32_combine: 8373 self tests passed
[    7.104984] crc32c_combine: 8373 self tests passed
[    7.105472] xz_dec_test: module loaded
[    7.105793] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it.
[    7.106849] 104-idio-16 104-idio-16: Unable to lock 104-idio-16 port addresses (0x0-0x8)
[    7.107511] 104-idio-16: probe of 104-idio-16 failed with error -16
[    7.108280] gpio_it87: no device
[    7.109221] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.109696] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    7.110281] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[    7.110867] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    7.111491] cpcihp_generic: not configured, disabling.
[    7.114350] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    7.115261] rivafb_setup START
[    7.115860] vmlfb: initializing
[    7.116292] no IO addresses supplied
[    7.116723] hgafb: HGA card not detected.
[    7.117059] hgafb: probe of hgafb.0 failed with error -22
[    7.118758] uvesafb: failed to execute /sbin/v86d
[    7.119150] uvesafb: make sure that the v86d helper is installed and executable
[    7.119762] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    7.120301] uvesafb: vbe_init() failed with -22
[    7.120692] uvesafb: probe of uvesafb.0 failed with error -22
[    7.121245] ipmi message handler version 39.2
[    7.121794] ipmi device interface
[    7.122118] IPMI System Interface driver.
[    7.122488] ipmi_si: Adding default-specified kcs state machine
[    7.123025] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    7.123866] ipmi_si: Interface detection failed
[    7.124248] ipmi_si: Adding default-specified smic state machine
[    7.124759] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[    7.125568] ipmi_si: Interface detection failed
[    7.125945] ipmi_si: Adding default-specified bt state machine
[    7.126432] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[    7.127233] ipmi_si: Interface detection failed
[    7.127667] ipmi_si: Unable to find any System Interface(s)
[    7.128844] Warning: Processor Platform Limit event detected, but not handled.
[    7.129433] Consider compiling CPUfreq support into your kernel.
[    7.130536] isapnp: Scanning for PnP cards...
[    7.491519] isapnp: No Plug & Play device found
[    7.566887] r3964: Philips r3964 Driver $Revision: 1.10 $
[    7.567365] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    7.591817] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.595040] MOXA Intellio family driver version 6.0k
[    7.595527] SyncLink GT
[    7.595780] SyncLink GT, tty major#241
[    7.596117] SyncLink GT no devices found
[    7.596485] SyncLink MultiPort driver $Revision: 4.38 $
[    7.617191] SyncLink MultiPort driver $Revision: 4.38 $, tty major#240
[    7.617792] SyncLink serial driver $Revision: 4.38 $
[    7.638114] SyncLink serial driver $Revision: 4.38 $, tty major#239
[    7.638815] lp: driver loaded but no devices found
[    7.639252] DoubleTalk PC - not found
[    7.639570] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    7.640453] Non-volatile memory driver v1.3
[    7.640872] ppdev: user-space parallel port driver
[    7.641284] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    7.641741] smapi::smapi_init, ERROR invalid usSmapiID
[    7.642183] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    7.642982] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    7.643581] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    7.644114] Linux agpgart interface v0.103
[    7.644948] SyncLink PC Card driver $Revision: 4.34 $, tty major#238
[    7.645515] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    7.646729] [drm] Initialized drm 1.1.0 20060810
[    7.647378] [drm] amdgpu kernel modesetting enabled.
[    7.648902] usbcore: registered new interface driver udl
[    7.650514] [drm] Found bochs VGA, ID 0xb0c0.
[    7.650939] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[    7.651645] [TTM] Zone  kernel: Available graphics memory: 150038 kiB
[    7.652196] [TTM] Initializing pool allocator
[    7.652571] [TTM] Initializing DMA pool allocator
[    7.656215] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[    7.656829] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[    7.658235] Failed to find cpu0 device node
[    7.658597] Unable to detect cache hierarchy from DT for CPU 0
[    7.659205] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    7.660005] dummy-irq: no IRQ given.  Use irq=N
[    7.660466] Phantom Linux Driver, version n0.9.8, init OK
[    7.661206] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    7.662122] c2port c2port0: C2 port uc added
[    7.662481] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    7.663544] Guest personality initialized and is inactive
[    7.664243] VMCI host device registered (name=vmci, major=10, minor=57)
[    7.664828] Initialized host personality
[    7.666525] usbcore: registered new interface driver viperboard
[    7.667413] usbcore: registered new interface driver pn533
[    7.668826] usbcore: registered new interface driver port100
[    7.669449] usbcore: registered new interface driver nfcmrvl
[    7.670411] LocalTalk card not found; 220 = ff, 240 = ff.
[    7.670911] slcan: serial line CAN interface driver
[    7.671330] slcan: 10 dynamic interface channels.
[    7.671889] usbcore: registered new interface driver stir4200
[    7.672736] usbcore: registered new interface driver mcs7780
[    7.673317] usbcore: registered new interface driver kingsun-sir
[    7.674163] usbcore: registered new interface driver ksdazzle-sir
[    7.674751] usbcore: registered new interface driver ks959-sir
[    7.676117] Intel ISA PCIC probe: not found.
[    7.676936] usbcore: registered new interface driver hwa-rc
[    7.677440] usbcore: registered new interface driver i1480-dfu-usb
[    7.678816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.679376] ehci-pci: EHCI PCI platform driver
[    7.679823] uhci_hcd: USB Universal Host Controller Interface driver
[    7.680617] driver u132_hcd
[    7.681106] usbcore: registered new interface driver hwa-hc
[    7.681836] usbcore: registered new interface driver wusb-cbaf
[    7.682358] usbcore: registered new interface driver usblp
[    7.682883] usbcore: registered new interface driver cdc_wdm
[    7.683436] usbcore: registered new interface driver appledisplay
[    7.683995] usbcore: registered new interface driver cypress_cy7c63
[    7.684708] usbcore: registered new interface driver cytherm
[    7.685224] usbcore: registered new interface driver emi26 - firmware loader
[    7.685838] ftdi_elan: driver ftdi-elan
[    7.686535] usbcore: registered new interface driver ftdi-elan
[    7.687328] usbcore: registered new interface driver idmouse
[    7.687850] usbcore: registered new interface driver usbled
[    7.688330] usbcore: registered new interface driver legousbtower
[    7.688879] usbcore: registered new interface driver rio500
[    7.689660] usbcore: registered new interface driver usbtest
[    7.690454] usbcore: registered new interface driver usb_ehset_test
[    7.691546] usbcore: registered new interface driver uss720
[    7.692148] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[    7.692938] uss720: NOTE: this is a special purpose driver to allow nonstandard
[    7.693544] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[    7.694152] uss720: If you just want to connect to a printer, use usblp instead
[    7.694826] usbcore: registered new interface driver sisusb
[    7.695306] usbcore: registered new interface driver cxacru
[    7.695801] xusbatm: malformed module parameters
[    7.697150] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    7.697823] dummy_hcd dummy_hcd.0: Dummy host controller
[    7.698531] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    7.700006] hub 1-0:1.0: USB hub found
[    7.700379] hub 1-0:1.0: 1 port detected
[    7.702317] udc dummy_udc.0: registering UDC driver [g_ether]
[    7.702938] using random self ethernet address
[    7.703316] using random host ethernet address
[    7.703691] g_ether gadget: adding config #1 'CDC Ethernet (EEM)'/422b3c00
[    7.704314] g_ether gadget: adding 'cdc_eem'/4d811170 to config 'CDC Ethernet (EEM)'/422b3c00
[    7.705612] usb0: HOST MAC b6:37:f3:10:0a:13
[    7.706041] usb0: MAC f6:f3:27:03:ab:da
[    7.706375] g_ether gadget: CDC Ethernet (EEM): super speed IN/ep1in-bulk OUT/ep2out-bulk
[    7.707093] g_ether gadget: cfg 1/422b3c00 speeds: super high full
[    7.707594] g_ether gadget:   interface 0 = cdc_eem/4d811170
[    7.708088] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    7.708652] g_ether gadget: g_ether ready
[    7.709001] dummy_udc dummy_udc.0: This device can perform faster if you connect it to a super-speed port...
[    7.709828] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    7.710369] usbip_core: USB/IP Core v1.0.0
[    7.710868] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[    7.711801] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2
[    7.713740] hub 2-0:1.0: USB hub found
[    7.714102] hub 2-0:1.0: 8 ports detected
[    7.716191] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0
[    7.716852] usbcore: registered new device driver usbip-host
[    7.717331] usbip_host: USB/IP Host Driver v1.0.0
[    7.717969] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.719541] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.720013] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.764175] mousedev: PS/2 mouse device common for all mice
[    7.765677] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    7.766424] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    7.768696] usbcore: registered new interface driver xpad
[    7.769251] usbcore: registered new interface driver gtco
[    7.769734] usbcore: registered new interface driver hanwang
[    7.770407] usbcore: registered new interface driver kbtab
[    7.770949] usbcore: registered new interface driver ati_remote2
[    7.771490] cm109: Keymap for Komunikate KIP1000 phone loaded
[    7.772053] usbcore: registered new interface driver cm109
[    7.772523] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    7.773410] usbcore: registered new interface driver ims_pcu
[    7.773949] usbcore: registered new interface driver keyspan_remote
[    7.774800] usbcore: registered new interface driver yealink
[    8.005868] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
[    8.007530] ACPI: No IRQ available for PCI Interrupt Link [LNKS]. Try pci=noacpi or acpi=off
[    8.008229] piix4_smbus 0000:00:01.3: PCI INT A: no GSI
[    8.008722] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    8.012431] i2c-parport: adapter type unspecified
[    8.012869] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    8.013601] usbcore: registered new interface driver i2c-tiny-usb
[    8.015188] pps pps0: new PPS source ktimer
[    8.015553] pps pps0: ktimer PPS source registered
[    8.015983] Driver for 1-wire Dallas network protocol.
[    8.016694] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    8.017466] __power_supply_register: Expected proper parent device for 'test_ac'
[    8.018116] power_supply test_ac: uevent
[    8.018447] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    8.018947] __power_supply_register: Expected proper parent device for 'test_battery'
[    8.019827] power_supply test_battery: uevent
[    8.020188] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    8.020961] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[    8.021985] __power_supply_register: Expected proper parent device for 'test_usb'
[    8.022817] power_supply test_usb: uevent
[    8.023160] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    8.028674] power_supply test_ac: power_supply_changed
[    8.029125] power_supply test_ac: power_supply_changed_work
[    8.029609] power_supply test_ac: uevent
[    8.029943] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    8.030405] power_supply test_ac: prop ONLINE=1
[    8.031660] power_supply test_battery: power_supply_changed
[    8.032132] power_supply test_battery: power_supply_changed_work
[    8.032648] power_supply test_battery: uevent
[    8.033008] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    8.033548] power_supply test_battery: prop STATUS=Discharging
[    8.034031] power_supply test_battery: prop CHARGE_TYPE=Fast
[    8.034495] power_supply test_battery: prop HEALTH=Good
[    8.034958] power_supply test_battery: prop PRESENT=1
[    8.035378] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    8.035854] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    8.036367] power_supply test_battery: prop CHARGE_FULL=100
[    8.036860] power_supply test_battery: prop CHARGE_NOW=50
[    8.037303] power_supply test_battery: prop CAPACITY=50
[    8.037735] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    8.038249] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    8.038781] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    8.039287] power_supply test_battery: prop MODEL_NAME=Test battery
[    8.039804] power_supply test_battery: prop MANUFACTURER=Linux
[    8.040295] power_supply test_battery: prop SERIAL_NUMBER=4.4.0-rc4-00001-g22bf2bb
[    8.040910] power_supply test_battery: prop TEMP=26
[    8.041313] power_supply test_battery: prop VOLTAGE_NOW=3300
[    8.041822] power_supply test_usb: power_supply_changed
[    8.042257] power_supply test_usb: power_supply_changed_work
[    8.042754] power_supply test_usb: uevent
[    8.043081] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    8.043553] power_supply test_usb: prop ONLINE=1
[    8.105744] applesmc: supported laptop not found!
[    8.106318] applesmc: driver init failed (ret=-19)!
[    8.157663] g_ether gadget: resume
[    8.157994] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.209686] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    8.211689] ------------[ cut here ]------------
[    8.212267] WARNING: CPU: 0 PID: 0 at include/linux/usb/gadget.h:405 composite_ep0_queue+0xad/0xd0()
[    8.213684] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc4-00001-g22bf2bb #1
[    8.214580]  00000000 00000000 54407de4 4125cd9f 00000000 54407e14 4109e21e 420f34b4
[    8.215626]  00000000 00000000 421bdc84 00000195 41761a1d 41761a1d 4d810ea8 4d810ea8
[    8.216679]  ffffff94 54407e24 4109e2eb 00000009 00000000 54407e48 41761a1d 00000001
[    8.217726] Call Trace:
[    8.218029]  [<4125cd9f>] dump_stack+0x48/0x69
[    8.218570]  [<4109e21e>] warn_slowpath_common+0x7e/0xb0
[    8.219204]  [<41761a1d>] ? composite_ep0_queue+0xad/0xd0
[    8.219972]  [<41761a1d>] ? composite_ep0_queue+0xad/0xd0
[    8.220741]  [<4109e2eb>] warn_slowpath_null+0x1b/0x20
[    8.221362]  [<41761a1d>] composite_ep0_queue+0xad/0xd0
[    8.222105]  [<41762055>] composite_setup+0x615/0x19e0
[    8.222723]  [<41769eba>] ? dummy_timer+0x4a/0xe30
[    8.223299]  [<4176a86d>] dummy_timer+0x9fd/0xe30
[    8.223872]  [<41769e70>] ? dummy_start+0x140/0x140
[    8.224461]  [<410f2cef>] call_timer_fn+0x6f/0xf0
[    8.225025]  [<410f2cb2>] ? call_timer_fn+0x32/0xf0
[    8.225612]  [<410f2eb1>] run_timer_softirq+0x141/0x1d0
[    8.226234]  [<41769e70>] ? dummy_start+0x140/0x140
[    8.226827]  [<410a0d8d>] __do_softirq+0xbd/0x1c0
[    8.227397]  [<410a0cd0>] ? _local_bh_enable+0x50/0x50
[    8.228013]  [<4104f376>] do_softirq_own_stack+0x26/0x40
[    8.228651]  <IRQ>  [<410a1085>] irq_exit+0x65/0x70
[    8.229258]  [<4107ea7e>] smp_trace_apic_timer_interrupt+0x5e/0x90
[    8.229993]  [<4107eab8>] smp_apic_timer_interrupt+0x8/0x10
[    8.230666]  [<41d78a5d>] apic_timer_interrupt+0x2d/0x34
[    8.231309]  [<410861f5>] ? native_safe_halt+0x5/0x10
[    8.231917]  [<41055198>] default_idle+0x8/0x10
[    8.232467]  [<41055919>] arch_cpu_idle+0x9/0x10
[    8.233016]  [<410d55d3>] default_idle_call+0x23/0x30
[    8.233627]  [<410d573c>] cpu_startup_entry+0x15c/0x240
[    8.234260]  [<41d6f31a>] rest_init+0xaa/0xb0
[    8.234782]  [<42327b05>] start_kernel+0x3df/0x3e4
[    8.235363]  [<423272c3>] i386_start_kernel+0x91/0x95
[    8.235971] ---[ end trace a9973fc5ac55cb31 ]---
[    8.236529] g_ether gadget: ep_queue --> -108
[    8.237050] g_ether gadget: setup complete --> 0, 0/18
[    8.237670] dummy_udc dummy_udc.0: setup --> -108
[    8.238647] g_ether gadget: ep_queue --> -108
[    8.239180] g_ether gadget: setup complete --> 0, 0/18
[    8.239802] dummy_udc dummy_udc.0: setup --> -108
[    8.240643] g_ether gadget: ep_queue --> -108
[    8.241168] g_ether gadget: setup complete --> 0, 0/18
[    8.241795] dummy_udc dummy_udc.0: setup --> -108
[    8.292662] g_ether gadget: resume
[    8.293094] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.344657] usb 1-1: device descriptor read/64, error -32
[    8.410400] Bluetooth: Virtual HCI driver ver 1.5
[    8.411689] Bluetooth: HCI UART driver ver 2.3
[    8.412244] Bluetooth: HCI UART protocol H4 registered
[    8.412882] Bluetooth: HCI UART protocol BCSP registered
[    8.413520] Bluetooth: HCI UART protocol LL registered
[    8.414146] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.415144] usbcore: registered new interface driver bcm203x
[    8.415889] usbcore: registered new interface driver bpa10x
[    8.416595] usbcore: registered new interface driver bfusb
[    8.417598] usbcore: registered new interface driver btusb
[    8.418288] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    8.419039] EDAC DEBUG: i5000_init: MC:
[    8.419554] EDAC DEBUG: i5400_init: MC:
[    8.420083] EDAC DEBUG: i7300_init: 
[    8.420814] EDAC DEBUG: i82875p_init: 875p pci_get_device fail
[    8.421592] EDAC DEBUG: i82975x_init: i82975x pci_get_device fail
[    8.422420] EDAC DEBUG: i3000_init: i3000 pci_get_device fail
[    8.423233] EDAC DEBUG: i82860_init: 860 pci_get_device fail
[    8.424178] platform eisa.0: Probing EISA bus 0
[    8.424759] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    8.425660] lguest: mapped switcher at ffd31000
[    8.426617] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    8.427987] usbcore: registered new interface driver vub300
[    8.434816] hidraw: raw HID events driver (C) Jiri Kosina
[    8.439008] usbcore: registered new interface driver usbhid
[    8.439708] usbhid: USB HID core driver
[    8.440431] asus_wmi: Asus Management GUID not found
[    8.442095] compal_laptop: Motherboard not recognized (You could try the module's force-parameter)
[    8.443197] dell_wmi: No known WMI GUID found
[    8.443741] dell_wmi_aio: No known WMI GUID found
[    8.444366] acer_wmi: Acer Laptop ACPI-WMI Extras
[    8.444948] acer_wmi: No or unsupported WMI interface, unable to load
[    8.445732] Initializing HPQ6001 module
[    8.446541] hdaps: supported laptop not found!
[    8.447107] g_ether gadget: ep_queue --> -108
[    8.447108] g_ether gadget: setup complete --> 0, 0/18
[    8.447110] dummy_udc dummy_udc.0: setup --> -108
[    8.448846] hdaps: driver init failed (ret=-19)!
[    8.449472] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    8.450493] g_ether gadget: ep_queue --> -108
[    8.450494] g_ether gadget: setup complete --> 0, 0/18
[    8.450496] dummy_udc dummy_udc.0: setup --> -108
[    8.452393] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[    8.453350] g_ether gadget: setup complete --> 0, 0/18
[    8.453352] dummy_udc dummy_udc.0: setup --> -108
g_ether gadget: ep_queue --> -108
[    8.461060]  fake-fmc-carrier: mezzanine 0
[    8.461906]       Manufacturer: fake-vendor
[    8.462381]       Product name: fake-design-for-testing
[    8.463199] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    8.464119] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001"
[    8.491000] intel_rapl: no valid rapl domains found in package 0
[    8.493173] oprofile: using timer interrupt.
[    8.493800] pktgen: Packet Generator for packet performance testing. Version: 2.75
[    8.495099] NET: Registered protocol family 26
[    8.495723] Netfilter messages via NETLINK v0.30.
[    8.496382] nf_conntrack version 0.5.0 (4688 buckets, 18752 max)
[    8.497351] ctnetlink v0.93: registering with nfnetlink.
[    8.498086] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    8.498953] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[    8.500009] ip_set: protocol 6
[    8.500507] IPVS: Registered protocols (TCP, UDP, AH, ESP)
[    8.501205] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    8.502452] IPVS: Creating netns size=1620 id=0
[    8.503154] IPVS: ipvs loaded.
[    8.503576] IPVS: [rr] scheduler registered.
[    8.504115] IPVS: [wlc] scheduler registered.
[    8.504701] g_ether gadget: resume
[    8.505145] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.506076] IPVS: [fo] scheduler registered.
[    8.506677] IPVS: [ovf] scheduler registered.
[    8.507221] IPVS: [lblc] scheduler registered.
[    8.507831] IPVS: [lblcr] scheduler registered.
[    8.508459] IPVS: [dh] scheduler registered.
[    8.509056] IPVS: [sh] scheduler registered.
[    8.509578] IPVS: [nq] scheduler registered.
[    8.510170] IPVS: [sip] pe registered.
[    8.510992] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.511966] Initializing XFRM netlink socket
[    8.512617] NET: Registered protocol family 10
[    8.514751] mip6: Mobile IPv6
[    8.515160] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.516156] sit: IPv6 over IPv4 tunneling driver
[    8.519102] ip6_gre: GRE over IPv6 tunneling driver
[    8.520691] NET: Registered protocol family 17
[    8.521258] NET: Registered protocol family 15
[    8.521856] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    8.523360] Ebtables v2.0 registered
[    8.524165] NET: Registered protocol family 5
[    8.524763] can: controller area network core (rev 20120528 abi 9)
[    8.525552] NET: Registered protocol family 29
[    8.526102] can: broadcast manager protocol (rev 20120528 t)
[    8.526815] can: netlink gateway (rev 20130117) max_hops=1
[    8.527745] Bluetooth: RFCOMM TTY layer initialized
[    8.528509] Bluetooth: RFCOMM socket layer initialized
[    8.529156] Bluetooth: RFCOMM ver 1.11
[    8.529647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.530291] Bluetooth: BNEP socket layer initialized
[    8.530903] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    8.531858] Bluetooth: HIDP socket layer initialized
[    8.532502] lec:lane_module_init: lec.c: initialized
[    8.533120] mpoa:atm_mpoa_init: mpc.c: initialized
[    8.533736] l2tp_core: L2TP core driver, V2.0
[    8.534276] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    8.534960] l2tp_netlink: L2TP netlink interface
[    8.535547] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    8.536272] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    8.537063] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[    8.538272] DECnet: Routing cache hash table of 256 buckets, 11Kbytes
[    8.539089] NET: Registered protocol family 12
[    8.539823] NET: Registered protocol family 35
[    8.540413] 8021q: 802.1Q VLAN Support v1.8
[    8.541331] DCCP: Activated CCID 2 (TCP-like)
[    8.542255] sctp: Hash tables configured (established 2730 bind 2978)
[    8.543535] tipc: Activated (version 2.0.0)
[    8.544091] NET: Registered protocol family 30
[    8.544997] tipc: Started in single node mode
[    8.545559] 9pnet: Installing 9P2000 support
[    8.546144] NET: Registered protocol family 37
[    8.547790] batman_adv: B.A.T.M.A.N. advanced 2015.2 (compatibility version 15) loaded
[    8.548764] openvswitch: Open vSwitch switching datapath
[    8.549752] NET: Registered protocol family 40
[    8.550305] mpls_gso: MPLS GSO support
[    8.553823] microcode: CPU0 sig=0x306c1, pf=0x1, revision=0x1
[    8.554873] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.555990] ... APIC ID:      00000000 (0)
[    8.556497] ... APIC VERSION: 01050014
[    8.556964] 0000000000000000000000000000000000000000000000000000000000000000
[    8.557963] 0000000000000000000000000000000000000000000000000000000000000000
[    8.558960] 0000000000000000000000000000000000000000000000000000000000008000
[    8.559981] 
[    8.560189] number of MP IRQ sources: 15.
[    8.560693] number of IO-APIC #0 registers: 24.
[    8.561234] testing the IO APIC.......................
[    8.561896] IO APIC #0......
[    8.563490] .... register #00: 00000000
[    8.563980] .......    : physical APIC id: 00
[    8.564505] .......    : Delivery Type: 0
[    8.564996] .......    : LTS          : 0
[    8.565487] .... register #01: 00170011
[    8.565956] .......     : max redirection entries: 17
[    8.566565] .......     : PRQ implemented: 0
[    8.567089] .......     : IO APIC version: 11
[    8.567617] .... register #02: 00000000
[    8.568088] .......     : arbitration: 00
[    8.568577] .... IRQ redirection table:
[    8.569053] IOAPIC 0:
[    8.569354]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.570310]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    8.571261]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    8.572218]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    8.573171]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    8.574130]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    8.575088]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    8.576017]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    8.576888]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    8.577755]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    8.578613]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    8.579488]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    8.580360]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    8.581223]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    8.582097]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    8.582963]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    8.583841]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.584716]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.585580]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.586453]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.587326]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.588195]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.589068]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.589943]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    8.590802] IRQ to pin mappings:
[    8.591161] IRQ0 -> 0:2
[    8.591470] IRQ1 -> 0:1
[    8.591784] IRQ3 -> 0:3
[    8.592085] IRQ4 -> 0:4
[    8.592394] IRQ5 -> 0:5
[    8.592708] IRQ6 -> 0:6
[    8.593030] IRQ7 -> 0:7
[    8.593385] IRQ8 -> 0:8
[    8.593734] IRQ9 -> 0:9
[    8.594072] IRQ10 -> 0:10
[    8.594438] IRQ11 -> 0:11
[    8.594800] IRQ12 -> 0:12
[    8.595149] IRQ13 -> 0:13
[    8.595514] IRQ14 -> 0:14
[    8.595880] IRQ15 -> 0:15
[    8.596225] .................................... done.
[    8.596866] Using IPI Shortcut mode
[    8.597311] usb 1-1: device descriptor read/64, error -32
[    8.601648] registered taskstats version 1
[    8.602169] page_owner is disabled
[    8.604749] hctosys: unable to open rtc device (rtc0)
[    8.605489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    8.606228] EDD information not available.
[    8.607930] usb0: eth_open
[    8.608599] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[    8.698716] g_ether gadget: suspend
[    8.750724] g_ether gadget: resume
[    8.751303] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.802666] usb 1-1: new high-speed USB device number 3 using dummy_hcd
[    8.804651] g_ether gadget: ep_queue --> -108
[    8.805274] g_ether gadget: setup complete --> 0, 0/18
[    8.805989] dummy_udc dummy_udc.0: setup --> -108
[    8.807651] g_ether gadget: ep_queue --> -108
[    8.808275] g_ether gadget: setup complete --> 0, 0/18
[    8.808987] dummy_udc dummy_udc.0: setup --> -108
[    8.810651] g_ether gadget: ep_queue --> -108
[    8.811277] g_ether gadget: setup complete --> 0, 0/18
[    8.811990] dummy_udc dummy_udc.0: setup --> -108
[    8.863672] g_ether gadget: resume
[    8.863992] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    8.914668] usb 1-1: device descriptor read/64, error -32
[    9.016650] g_ether gadget: ep_queue --> -108
[    9.017065] g_ether gadget: setup complete --> 0, 0/18
[    9.017588] dummy_udc dummy_udc.0: setup --> -108
[    9.018648] g_ether gadget: ep_queue --> -108
[    9.019084] g_ether gadget: setup complete --> 0, 0/18
[    9.019512] dummy_udc dummy_udc.0: setup --> -108
[    9.020641] g_ether gadget: ep_queue --> -108
[    9.021040] g_ether gadget: setup complete --> 0, 0/18
[    9.021521] dummy_udc dummy_udc.0: setup --> -108
[    9.072668] g_ether gadget: resume
[    9.073078] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    9.124660] usb 1-1: device descriptor read/64, error -32
[    9.225671] g_ether gadget: suspend
[    9.276649] g_ether gadget: resume
[    9.276948] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    9.327652] usb 1-1: new high-speed USB device number 4 using dummy_hcd
[    9.328642] dummy_udc dummy_udc.0: set_address = 4
[    9.340657] g_ether gadget: ep_queue --> -108
[    9.341081] g_ether gadget: setup complete --> 0, 0/8
[    9.341527] dummy_udc dummy_udc.0: setup --> -108
[    9.342648] g_ether gadget: ep_queue --> -108
[    9.343046] g_ether gadget: setup complete --> 0, 0/8
[    9.343463] dummy_udc dummy_udc.0: setup --> -108
[    9.344645] g_ether gadget: ep_queue --> -108
[    9.345040] g_ether gadget: setup complete --> 0, 0/8
[    9.345455] dummy_udc dummy_udc.0: setup --> -108
[    9.345865] usb 1-1: device descriptor read/8, error -32
[    9.458648] g_ether gadget: ep_queue --> -108
[    9.459037] g_ether gadget: setup complete --> 0, 0/8
[    9.459460] dummy_udc dummy_udc.0: setup --> -108
[    9.460644] g_ether gadget: ep_queue --> -108
[    9.461026] g_ether gadget: setup complete --> 0, 0/8
[    9.461465] dummy_udc dummy_udc.0: setup --> -108
[    9.462639] g_ether gadget: ep_queue --> -108
[    9.463004] g_ether gadget: setup complete --> 0, 0/8
[    9.463436] dummy_udc dummy_udc.0: setup --> -108
[    9.463851] usb 1-1: device descriptor read/8, error -32
[    9.564665] g_ether gadget: suspend
[    9.615682] g_ether gadget: resume
[    9.616058] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
[    9.667666] usb 1-1: new high-speed USB device number 5 using dummy_hcd
[    9.668644] dummy_udc dummy_udc.0: set_address = 5
[    9.680650] g_ether gadget: ep_queue --> -108
[    9.681047] g_ether gadget: setup complete --> 0, 0/8
[    9.681490] dummy_udc dummy_udc.0: setup --> -108
[    9.682641] g_ether gadget: ep_queue --> -108
[    9.683036] g_ether gadget: setup complete --> 0, 0/8
[    9.683467] dummy_udc dummy_udc.0: setup --> -108
[    9.684641] g_ether gadget: ep_queue --> -108
[    9.685019] g_ether gadget: setup complete --> 0, 0/8
[    9.685433] dummy_udc dummy_udc.0: setup --> -108
[    9.685844] usb 1-1: device descriptor read/8, error -32
[    9.798643] g_ether gadget: ep_queue --> -108
[    9.799037] g_ether gadget: setup complete --> 0, 0/8
[    9.799455] dummy_udc dummy_udc.0: setup --> -108
[    9.800644] g_ether gadget: ep_queue --> -108
[    9.801008] g_ether gadget: setup complete --> 0, 0/8
[    9.801424] dummy_udc dummy_udc.0: setup --> -108
[    9.802638] g_ether gadget: ep_queue --> -108
[    9.803001] g_ether gadget: setup complete --> 0, 0/8
[    9.803415] dummy_udc dummy_udc.0: setup --> -108
[    9.803822] usb 1-1: device descriptor read/8, error -32
[    9.904649] g_ether gadget: suspend
[    9.904978] usb usb1-port1: unable to enumerate USB device
[    9.905486] usb usb1: dummy_bus_suspend
[    9.915646] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   18.608655] Waiting up to 110 more seconds for network.
[   28.608675] Waiting up to 100 more seconds for network.
[   38.609648] Waiting up to 90 more seconds for network.
[   48.610676] Waiting up to 80 more seconds for network.
[   58.611747] Waiting up to 70 more seconds for network.
[   66.773713] cfg80211: Verifying active interfaces after reg change
[   68.612654] Waiting up to 60 more seconds for network.
[   78.613657] Waiting up to 50 more seconds for network.
[   88.613645] Waiting up to 40 more seconds for network.
[   98.613651] Waiting up to 30 more seconds for network.
[  108.614695] Waiting up to 20 more seconds for network.
[  118.614681] Waiting up to 10 more seconds for network.
[  128.608655] cfg80211: Restoring regulatory settings
[  128.609092] cfg80211: Kicking the queue
[  128.619644] Sending DHCP requests ..
[  131.750663] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  131.751835] cfg80211: Restoring regulatory settings
[  131.752508] cfg80211: Kicking the queue
[  134.894654] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  134.895395] cfg80211: Restoring regulatory settings
[  134.895823] cfg80211: Kicking the queue
[  135.692655] .
[  138.037661] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  138.038405] cfg80211: Restoring regulatory settings
[  138.038860] cfg80211: Kicking the queue
[  141.180654] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  141.181380] cfg80211: Restoring regulatory settings
[  141.181851] cfg80211: Kicking the queue
[  143.569646] .
[  144.323671] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  144.324982] cfg80211: Restoring regulatory settings
[  144.325749] cfg80211: Kicking the queue
[  147.467654] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  147.468497] cfg80211: Restoring regulatory settings
[  147.468963] cfg80211: Kicking the queue
[  150.610650] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  150.611426] cfg80211: Restoring regulatory settings
[  150.611887] cfg80211: Kicking the queue
[  153.753654] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  153.754397] cfg80211: Restoring regulatory settings
[  153.754844] cfg80211: Kicking the queue
[  156.896650] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[  156.897389] cfg80211: Restoring regulatory settings
[  156.897805] cfg80211: Kicking the queue
[  157.352640] .. timed out!
[  211.473952] usb0: stop stats: rx/tx 0/0, errs 0/0
[  211.474585] IP-Config: Reopening network devices...
[  211.475167] usb0: eth_open
[  211.475463] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  216.897660] cfg80211: Verifying active interfaces after reg change
[  221.476660] Waiting up to 110 more seconds for network.
[  231.477663] Waiting up to 100 more seconds for network.
[  241.478658] Waiting up to 90 more seconds for network.
[  251.478655] Waiting up to 80 more seconds for network.
[  261.478682] Waiting up to 70 more seconds for network.
[  271.479657] Waiting up to 60 more seconds for network.
[  281.480655] Waiting up to 50 more seconds for network.
[  291.480654] Waiting up to 40 more seconds for network.
[  301.480659] Waiting up to 30 more seconds for network.
[  311.480656] Waiting up to 20 more seconds for network.
[  321.482729] Waiting up to 10 more seconds for network.
[  331.487652] Sending DHCP requests ...... timed out!
[  413.776001] usb0: stop stats: rx/tx 0/0, errs 0/0
[  413.776744] IP-Config: Auto-configuration of network failed
[  413.777462] Bluetooth: Starting self testing
[  413.779277] Bluetooth: SMP test passed in 16 usecs
[  413.779945] Bluetooth: Finished self testing
[  413.781418] debug: unmapping init [mem 0x42327000-0x42519fff]
[  413.782273] cryptomgr_probe (156) used greatest stack depth: 7068 bytes left
[  413.794130] random: init urandom read with 1 bits of entropy available
[  413.817884] hostname (159) used greatest stack depth: 6988 bytes left
[  413.832225] hwclock (161) used greatest stack depth: 6876 bytes left
[  413.856699] mountall (164) used greatest stack depth: 6764 bytes left
mountall: Event failed
[  413.940814] init: Failed to create pty - disabling logging for job
[  413.941706] init: Temporary process spawn error: No such file or directory
mount: unknown filesystem type 'devpts'
mountall: mount /dev/pts [188] terminated with status 32
mountall: Filesystem could not be mounted: /dev/pts
[  413.957919] init: Failed to create pty - disabling logging for job
[  413.958852] init: Temporary process spawn error: No such file or directory
[  413.991100] init: Failed to create pty - disabling logging for job
[  413.991966] init: Temporary process spawn error: No such file or directory
[  413.997978] init: Failed to create pty - disabling logging for job
[  413.998928] init: Temporary process spawn error: No such file or directory
[  414.021315] sh (198) used greatest stack depth: 6752 bytes left
[  414.070551] 00-header (209) used greatest stack depth: 6684 bytes left
[  414.078922] init: Failed to create pty - disabling logging for job
[  414.079847] init: Temporary process spawn error: No such file or directory
[  414.095256] init: Failed to create pty - disabling logging for job
[  414.098739] init: Temporary process spawn error: No such file or directory
[  414.109211] init: Failed to create pty - disabling logging for job
[  414.125705] init: Failed to create pty - disabling logging for job
[  414.133341] init: Failed to create pty - disabling logging for job
[  414.140067] init: Failed to create pty - disabling logging for job
udevd[236]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory
udevd[237]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXPWRBN:': No such file or directory
udevd[240]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[241]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[243]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory
udevd[245]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory
udevd[244]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[249]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[250]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[252]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[255]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[257]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[256]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[258]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[259]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[260]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[296]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
udevd[295]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory
udevd[294]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory
udevd[299]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory
udevd[298]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory
udevd[297]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
udevd[301]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory
udevd[303]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80': No such file or directory
udevd[302]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory
udevd[300]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory
udevd[304]: failed to execute '/sbin/modprobe' '/sbin/modprobe -q fbcon': No such file or directory
[  414.791540] init: Failed to create pty - disabling logging for job
[  414.800095] init: Failed to create pty - disabling logging for job
udevd[307]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:alarmtimer': No such file or directory
[  414.817482] init: Failed to create pty - disabling logging for job
[  414.827852] init: Failed to create pty - disabling logging for job

udevd[305]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d0000100Esv00001AF4sd00001100bc02sc00i00': No such file or directory
udevd[306]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[308]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory
udevd[312]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:hgafb': No such file or directory
udevd[315]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:i5k_amb': No such file or directory
udevd[316]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:microcode': No such file or directory
udevd[318]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:platform-framebuffer': No such file or directory
udevd[319]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:regulatory': No such file or directory
udevd[317]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv serio:ty01pr00id00ex00': No such file or directory
udevd[320]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory
udevd[321]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:uvesafb': No such file or directory
[  415.077933] init: Failed to create pty - disabling logging for job
[  415.093025] init: Failed to create pty - disabling logging for job

Elapsed time: 420
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /pkg/linux/i386-randconfig-x0-12141127/gcc-5/22bf2bb019c7f92cda32c46b95715b0b208052d0/vmlinuz-4.4.0-rc4-00001-g22bf2bb -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-12/bisect_boot-1-quantal-core-i386.cgz-i386-randconfig-x0-12141127-22bf2bb019c7f92cda32c46b95715b0b208052d0-20151214-1580-pcbj5u-0.yaml ARCH=i386 kconfig=i386-randconfig-x0-12141127 branch=linux-devel/devel-catchup-201512141236 commit=22bf2bb019c7f92cda32c46b95715b0b208052d0 BOOT_IMAGE=/pkg/linux/i386-randconfig-x0-12141127/gcc-5/22bf2bb019c7f92cda32c46b95715b0b208052d0/vmlinuz-4.4.0-rc4-00001-g22bf2bb max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-x0-12141127/gcc-5/22bf2bb019c7f92cda32c46b95715b0b208052d0/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-12::dhcp drbd.minor_count=8'  -initrd /fs/sdi1/initrd-vm-vp-quantal-i386-12 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-12 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-12 -daemonize -display none -monitor null 
