This patch removes trailing whitespaces reported by checkpatch.
Signed-off-by: Frederik Völkel <frederik.voel...@fau.de>
Signed-off-by: Lukas Braun <lukas.br...@fau.de>
---
5 trailing whitespaces issues are still left. We are not sure how
to fix them.
---
drivers/tty/serial/68328serial.c | 88 ++++++++++++++++++++--------------------
1 file changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 22f52e0..3e974d2 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -217,7 +217,7 @@ static void rs_stop(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_stop"))
return;
-
+
local_irq_save(flags);
uart->ustcnt &= ~USTCNT_TXEN;
local_irq_restore(flags);
@@ -246,10 +246,10 @@ static void rs_start(struct tty_struct *tty)
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
-
+
local_irq_save(flags);
if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
#ifdef USE_INTS
@@ -271,9 +271,9 @@ static void receive_chars(struct m68k_serial *info,
unsigned short rx)
*/
#ifndef CONFIG_XCOPILOT_BUGS
do {
-#endif
+#endif
ch = GET_FIELD(rx, URX_RXDATA);
-
+
if (info->is_cons) {
if (URX_BREAK & rx) { /* whee, break received */
return;
@@ -374,7 +374,7 @@ static int startup(struct m68k_serial *info, struct
tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
-
+
if (info->tport.flags & ASYNC_INITIALIZED)
return 0;
@@ -399,7 +399,7 @@ static int startup(struct m68k_serial *info, struct
tty_struct *tty)
* Finally, enable sequencing and interrupts
*/
#ifdef USE_INTS
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
+ uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
#else
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
@@ -434,7 +434,7 @@ static void shutdown(struct m68k_serial *info, struct
tty_struct *tty)
return;
local_irq_save(flags);
-
+
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
info->xmit_buf = 0;
@@ -442,7 +442,7 @@ static void shutdown(struct m68k_serial *info, struct
tty_struct *tty)
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
-
+
info->tport.flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
@@ -491,7 +491,7 @@ struct {
{1, 0x26}, /* 38400 */
{0, 0x26}, /* 57600 */
{1, 0x38}, /* 115200 */
-};
+};
#endif
/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
@@ -520,14 +520,14 @@ static void change_speed(struct m68k_serial *info, struct
tty_struct *tty)
i = (i & ~CBAUDEX) + B38400;
}
- uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
+ uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP |
USTCNT_8_7);
-
+
if ((cflag & CSIZE) == CS8)
ustcnt |= USTCNT_8_7;
-
+
if (cflag & CSTOPB)
ustcnt |= USTCNT_STOP;
@@ -535,7 +535,7 @@ static void change_speed(struct m68k_serial *info, struct
tty_struct *tty)
ustcnt |= USTCNT_PARITYEN;
if (cflag & PARODD)
ustcnt |= USTCNT_ODD_EVEN;
-
+
#ifdef CONFIG_SERIAL_68328_RTS_CTS
if (cflag & CRTSCTS) {
uart->utx.w &= ~UTX_NOCTS;
@@ -545,7 +545,7 @@ static void change_speed(struct m68k_serial *info, struct
tty_struct *tty)
#endif
ustcnt |= USTCNT_TXEN;
-
+
uart->ustcnt = ustcnt;
return;
}
@@ -590,7 +590,7 @@ static void rs_fair_output(void)
void console_print_68328(const char *p)
{
char c;
-
+
while ((c = *(p++)) != 0) {
if (c == '\n')
rs_put_char('\r');
@@ -611,7 +611,7 @@ static void rs_set_ldisc(struct tty_struct *tty)
return;
info->is_cons = (tty->termios.c_line == N_TTY);
-
+
printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" :
"off");
}
@@ -677,7 +677,7 @@ static int rs_write(struct tty_struct *tty,
local_save_flags(flags);
while (1) {
- local_irq_disable();
+ local_irq_disable();
c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
local_irq_restore(flags);
@@ -698,7 +698,7 @@ static int rs_write(struct tty_struct *tty,
if (info->xmit_cnt && !tty->stopped) {
/* Enable transmitter */
- local_irq_disable();
+ local_irq_disable();
#ifndef USE_INTS
while (info->xmit_cnt) {
#endif
@@ -728,7 +728,7 @@ static int rs_write_room(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
int ret;
-
+
if (serial_paranoia_check(info, tty->name, "rs_write_room"))
return 0;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
@@ -740,7 +740,7 @@ static int rs_write_room(struct tty_struct *tty)
static int rs_chars_in_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
+
if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
return 0;
return info->xmit_cnt;
@@ -750,7 +750,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
local_irq_save(flags);
@@ -773,7 +773,7 @@ static void rs_throttle(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_throttle"))
return;
-
+
if (I_IXOFF(tty))
info->x_char = STOP_CHAR(tty);
@@ -786,7 +786,7 @@ static void rs_unthrottle(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
return;
-
+
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
@@ -807,7 +807,7 @@ static int get_serial_info(struct m68k_serial *info,
struct serial_struct *retinfo)
{
struct serial_struct tmp;
-
+
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
@@ -832,7 +832,7 @@ static int set_serial_info(struct m68k_serial *info, struct
tty_struct *tty,
struct tty_port *port = &info->tport;
struct serial_struct new_serial;
struct m68k_serial old_info;
- int retval = 0;
+ int retval = 0;
if (!new_info)
return -EFAULT;
@@ -911,11 +911,11 @@ static void send_break(struct m68k_serial *info, unsigned
int duration)
if (!info->port)
return;
local_irq_save(flags);
-#ifdef USE_INTS
+#ifdef USE_INTS
uart->utx.w |= UTX_SEND_BREAK;
msleep_interruptible(duration);
uart->utx.w &= ~UTX_SEND_BREAK;
-#endif
+#endif
local_irq_restore(flags);
}
@@ -934,7 +934,7 @@ static int rs_ioctl(struct tty_struct *tty,
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
-
+
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
@@ -979,7 +979,7 @@ static void rs_set_termios(struct tty_struct *tty, struct
ktermios *old_termios)
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios.c_cflag & CRTSCTS))
rs_start(tty);
-
+
}
/*
@@ -1001,14 +1001,14 @@ static void rs_close(struct tty_struct *tty, struct
file *filp)
if (serial_paranoia_check(info, tty->name, "rs_close"))
return;
-
+
local_irq_save(flags);
-
+
if (tty_hung_up_p(filp)) {
local_irq_restore(flags);
return;
}
-
+
if ((tty->count == 1) && (port->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
@@ -1050,11 +1050,11 @@ static void rs_close(struct tty_struct *tty, struct
file *filp)
shutdown(info, tty);
rs_flush_buffer(tty);
-
+
tty_ldisc_flush(tty);
tty->closing = 0;
tty_port_tty_set(&info->tport, NULL);
-#warning "This is not and has never been valid so fix it"
+#warning "This is not and has never been valid so fix it"
#if 0
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
@@ -1064,7 +1064,7 @@ static void rs_close(struct tty_struct *tty, struct file
*filp)
if (tty->ldisc.open)
(tty->ldisc.open)(tty);
}
-#endif
+#endif
if (port->blocked_open) {
if (port->close_delay)
msleep_interruptible(jiffies_to_msecs(port->close_delay));
@@ -1080,10 +1080,10 @@ static void rs_close(struct tty_struct *tty, struct
file *filp)
void rs_hangup(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
+
if (serial_paranoia_check(info, tty->name, "rs_hangup"))
return;
-
+
rs_flush_buffer(tty);
shutdown(info, tty);
info->tport.count = 0;
@@ -1166,14 +1166,14 @@ rs68328_init(void)
/* Initialize the tty_driver structure */
/* SPARC: Not all of this is exactly right for us. */
-
+
serial_driver->name = "ttyS";
serial_driver->major = TTY_MAJOR;
serial_driver->minor_start = 64;
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
serial_driver->subtype = SERIAL_TYPE_NORMAL;
serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
+ serial_driver->init_termios.c_cflag =
m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &rs_ops);
@@ -1192,11 +1192,11 @@ rs68328_init(void)
info->x_char = 0;
info->line = i;
info->is_cons = 1; /* Means shortcuts work */
-
- printk("%s%d at 0x%08x (irq = %d)", serial_driver->name,
info->line,
+
+ printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line,
info->port, info->irq);
printk(" is a builtin MC68328 UART\n");
-
+
#ifdef CONFIG_M68VZ328
if (i > 0)
PJSEL &= 0xCF; /* PSW enable second port output */
@@ -1244,7 +1244,7 @@ again:
goto again;
}
- UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
+ UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP |
USTCNT_8_7);
ustcnt |= USTCNT_8_7;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
