> I tracked it down to one of the drives being forced into PIO4 mode
> rather than UDMA mode; dmesg bits:
> ata4.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 0/32)
> ata4.00: ata4: dev 0 multi count 16
> ata4.00: simplex DMA is claimed by other device, disabling DMA
Your ULi controller is reporting that it supports UDMA upon only one
channel at a time. The kernel is honouring this information. The older
ULi (was ALi) PATA devices report simplex but let you turn it off so see
if the following does the trick. Test carefully as always with disk driver
changes.
(Jeff probably best to check the docs before merging this but I believe
it is sane)
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
--- drivers/ata/sata_uli.c~ 2006-12-13 10:53:58.848881256 +0000
+++ drivers/ata/sata_uli.c 2006-12-13 10:53:58.848881256 +0000
@@ -211,6 +211,8 @@
if (rc)
goto err_out_regions;
+ ata_pci_clear_simplex(pdev);
+
ppi[0] = ppi[1] = &uli_port_info;
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY |
ATA_PORT_SECONDARY);
if (!probe_ent) {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
