On Fri, 4 Dec 2015 22:24:42 +0100
Jens Kuske <jensku...@gmail.com> wrote:
> The Allwinner H3 is a home entertainment system oriented SoC with
> four Cortex-A7 cores and a Mali-400MP2 GPU.
>
> Signed-off-by: Jens Kuske <jensku...@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 497
> ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 497 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> new file mode 100644
> index 0000000..1524130e
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -0,0 +1,497 @@
[snip]
> + bus_gates: clk@01c20060 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun8i-h3-bus-gates-clk";
> + reg = <0x01c20060 0x14>;
> + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
> + clock-names = "ahb1", "ahb2", "apb1", "apb2";
> + clock-indices = <5>, <6>, <8>,
> + <9>, <10>, <13>,
> + <14>, <17>, <18>,
> + <19>, <20>,
> + <21>, <23>,
> + <24>, <25>,
> + <26>, <27>,
> + <28>, <29>,
> + <30>, <31>, <32>,
> + <35>, <36>, <37>,
> + <40>, <41>, <43>,
> + <44>, <52>, <53>,
> + <54>, <64>,
> + <65>, <69>, <72>,
> + <76>, <77>, <78>,
> + <96>, <97>, <98>,
> + <112>, <113>,
> + <114>, <115>,
> + <116>, <128>, <135>;
> + clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
> + "bus_mmc1", "bus_mmc2", "bus_nand",
> + "bus_sdram", "bus_gmac", "bus_ts",
> + "bus_hstimer", "bus_spi0",
> + "bus_spi1", "bus_otg",
> + "bus_otg_ehci0", "bus_ehci1",
> + "bus_ehci2", "bus_ehci3",
> + "bus_otg_ohci0", "bus_ohci1",
> + "bus_ohci2", "bus_ohci3", "bus_ve",
> + "bus_lcd0", "bus_lcd1",
> "bus_deint",
The tcon1 clock is used by both lcd0 and lcd1, while the tcon0 clock is used
for TV output from lcd1, so, this should be:
"bus_tcon0", "bus_tcon1", "bus_deint",
(the tcon1 clock is used by both lcd0 and lcd1, while
the tcon0 clock is used for TV output from lcd1)
> + "bus_csi", "bus_tve", "bus_hdmi",
> + "bus_de", "bus_gpu", "bus_msgbox",
> + "bus_spinlock", "bus_codec",
> + "bus_spdif", "bus_pio", "bus_ths",
> + "bus_i2s0", "bus_i2s1", "bus_i2s2",
> + "bus_i2c0", "bus_i2c1", "bus_i2c2",
> + "bus_uart0", "bus_uart1",
> + "bus_uart2", "bus_uart3",
> + "bus_scr", "bus_ephy", "bus_dbg";
> + };
[snip]
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
