The maximum baud rate depends on the sampling rate. HSCIF has a variable sampling rate and sets s->sampling_rate to zero, hence use the minimum sampling rate of 8.
Signed-off-by: Geert Uytterhoeven <[email protected]> --- drivers/tty/serial/sh-sci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index dccea5df5355076a..d82735dd62ae38d8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1961,7 +1961,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, * that the previous boot loader has enabled required clocks and * setup the baud rate generator hardware for us already. */ - max_baud = port->uartclk ? port->uartclk / 16 : 115200; + if (port->uartclk) + max_baud = port->uartclk / max(s->sampling_rate, 8U); + else + max_baud = 115200; baud = uart_get_baud_rate(port, termios, old, 0, max_baud); if (likely(baud && port->uartclk)) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
