The hrtimer sw-trigger allow for polling mode on devices w/o hard irq
trigger source, but setting the frequency from userland for both the
hrtimer trigger device and the adc is error prone.

Make adc drivers able to setup the sw-trigger at the last second when the
buffer is enabled, and the sampling frequency is known.

enable_trigger is called from verify_update, before the classical setup_ops
are called in buffers_enable. This gives a chance to complete the setup of
indio_dev->trig.

Signed-off-by: Marc Titinger <mtitin...@baylibre.com>
---
 drivers/iio/industrialio-buffer.c | 5 +++++
 include/linux/iio/iio.h           | 3 +++
 2 files changed, 8 insertions(+)

diff --git a/drivers/iio/industrialio-buffer.c 
b/drivers/iio/industrialio-buffer.c
index d7e908a..ba7abd4 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -647,6 +647,11 @@ static int iio_verify_update(struct iio_dev *indio_dev,
        if (insert_buffer)
                modes &= insert_buffer->access->modes;
 
+       if (indio_dev->setup_ops &&
+           indio_dev->setup_ops->enable_trigger &&
+          (indio_dev->setup_ops->enable_trigger(indio_dev) < 0))
+               return -ENXIO;
+
        /* Definitely possible for devices to support both of these. */
        if ((modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) {
                config->mode = INDIO_BUFFER_TRIGGERED;
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 7bb7f67..8f82113 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -419,6 +419,8 @@ struct iio_info {
 
 /**
  * struct iio_buffer_setup_ops - buffer setup related callbacks
+ * @enable_trigger:    [DRIVER] function to call if a trigger is instancied
+ *                              upon enabling the buffer (sw triggers)
  * @preenable:         [DRIVER] function to run prior to marking buffer enabled
  * @postenable:                [DRIVER] function to run after marking buffer 
enabled
  * @predisable:                [DRIVER] function to run prior to marking buffer
@@ -428,6 +430,7 @@ struct iio_info {
  *                     scan mask is valid for the device.
  */
 struct iio_buffer_setup_ops {
+       int (*enable_trigger)(struct iio_dev *);
        int (*preenable)(struct iio_dev *);
        int (*postenable)(struct iio_dev *);
        int (*predisable)(struct iio_dev *);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to