On Thu, Nov 05, 2015 at 05:53:13PM +0800, Shunqian Zheng wrote:

This is basically all good, a few very minor comments below but nothing
that should take any time to fix.

> +static const char *rk3036_codec_antipop_text[] = {"none", "work"};
> +static const unsigned int rk3036_codec_antipop_values[] = {0x1, 0x2};
> +
> +static SOC_VALUE_ENUM_DOUBLE_DECL(rk3036_codec_antipop_enum, INNO_R09,
> +             INNO_R09_HPL_ANITPOP_SHIFT, INNO_R09_HPR_ANITPOP_SHIFT, 0x3,
> +             rk3036_codec_antipop_text, rk3036_codec_antipop_values);

This looks like a simple boolean control rather than an enum - it looks
like it's just turning antipop on and off.

> +     SOC_DOUBLE_R_RANGE_TLV("Headphone Volume", INNO_R07, INNO_R08,
> +             INNO_HP_GAIN_SHIFT, INNO_HP_GAIN_N39DB,
> +             INNO_HP_GAIN_0DB, 0, rk3036_codec_hp_tlv),
> +     SOC_DOUBLE("Zero Cross Detect", INNO_R06, INNO_R06_VOUTL_CZ_SHIFT,
> +             INNO_R06_VOUTR_CZ_SHIFT, 1, 0),

This should be "Zero Cross Switch".

> +     SOC_DOUBLE("HP Mute", INNO_R09, INNO_R09_HPL_MUTE_SHIFT,
> +             INNO_R09_HPR_MUTE_SHIFT, 1, 1),

This should be "Headphone Switch".

> +static int rk3036_codec_add_widgets(struct snd_soc_codec *codec)
> +{
> +     struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
> +
> +     snd_soc_add_codec_controls(codec, rk3036_codec_dapm_controls,
> +             ARRAY_SIZE(rk3036_codec_dapm_controls));
> +
> +     snd_soc_dapm_new_controls(dapm, rk3036_codec_dapm_widgets,
> +             ARRAY_SIZE(rk3036_codec_dapm_widgets));
> +
> +     snd_soc_dapm_add_routes(dapm, rk3036_codec_dapm_routes,
> +             ARRAY_SIZE(rk3036_codec_dapm_routes));

Just point at the tables from the driver structure and let the core do
the initialisation for you.

> +static int rk3036_codec_set_bias_level(struct snd_soc_codec *codec,
> +                                    enum snd_soc_bias_level level)
> +{
> +     switch (level) {
> +     case SND_SOC_BIAS_STANDBY:
> +             /* set a big current for capacitor charging. */
> +             snd_soc_write(codec, INNO_R10, INNO_R10_MAX_CUR);
> +             /* start precharge */
> +             snd_soc_write(codec, INNO_R06, INNO_R06_DAC_PRECHARGE);

Do we not need to wait for this to ramp?

Attachment: signature.asc
Description: PGP signature

Reply via email to