----- Original Message -----
From: Jakob Østergaard <[EMAIL PROTECTED]>
To: Diamon <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Sunday, October 08, 2000 10:51 AM
Subject: Re: Hard lock with Raid 0.90 on buslogic flashpoint SCSI card


> On Sat, Oct 07, 2000 at 09:00:15PM -0500, Diamon wrote:
> >
> >     I hope this is going to the right list/group/etc, as I got this
email
> > address from someone on #kernelnewbies...
>
> linux-raid is better for RAID problems.

    Ok, I'll refer to them for raid in the future...

> >
> >     Attempting to mkraid /dev/md0 a raid5 array using a Buslogic
Flashpoint
> > fast SCSI PCI card will always hard lock the system at exactly 2%
complete.
> > There is no oops or log, and it's a total lockup.  I can't even switch
> > virtual terminals when it locks.  Using an AHA-2940UW in place of the
> > buslogic works perfectly.
>
> Which tells us it's not a bug in the RAID layer.

    Good, that makes life easier, and that's what I thought too.  I'll swing
it past the folks at linux-raid in case it's a feaky buffer thing or
something.

> >

    {SNIP!}

> >
>
> I bet you can make your system lock up with the buslogic card just by
doing
> normal non-RAID disk I/O as well.  Try copying files between the disks, or
> something else that's disk intensive.

    No luck locking it up with some Bonnie testing, and dd if=/dev/zero
of=/dev/sd<whatever> to all drives in the array simultaneously did not lock
up either, nor did Bonnie on the non-raid drive while doing the dd to the 3
in the raid.


> I don't know about special issues with the buslogic card and the kernel
you're
> running.  It could be a driver problem, a card problem, or perhaps a
wiring
> problem (this can sometimes kill the kernel because some drivers
error-handling
> suck) or a disk problem (if the reconstruction halts at the exact same
place
> every time this could be likely).

    I checked the media on all drives, no errors visible to Adaptec's bios
verify tests, and nothing on the drive's glist.  If I run 'top' while it's
rebuilding, it gets farther before locking, but only 3-8% along vs 2%
without top.  I'll try swapping out the cable and the card.  Got extras of
those on hand.

> --
> ................................................................
> :   [EMAIL PROTECTED]   : And I see the elder races,         :
> :.........................: putrid forms of man                :
> :   Jakob Østergaard      : See him rise and claim the earth,  :
> :        OZ9ABN           : his downfall is at hand.           :
> :.........................:............{Konkhra}...............:


    Please reply to me directly (and on the list if it's useful to do so) as
I'm not in the mailing list.

    Thanks for your help!
        Diamon

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]

Reply via email to