On Sun, 08 Oct 2000 16:37:03 safemode wrote:
> I know this passed by the list before but i missed it. How do you get
> ide
> - scsi cdrecording to work again? or is this a cdrecord incompatibility
> issue now? This worked a couple sub-versions ago in test8. anyone
> know?
>
Forgot to mention, this is linux 2.4.0-test9 with rik's latest vm patch. I
compiled scsi emu support and scsi cdrom support into the kernel and made
ide-cdrom support as module and it's not loaded. I get this in dmesg:
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IDE-CD Model: R/RW 4x4x24 Rev: C12a
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
When i set cdrecord to sr0, i get read-only device. and device not
recognized errors. Here is the output to cdrecord dev=/dev/sr0 -inq
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
cdrecord: Read-only file system. Cannot open '/dev/sr0'. Cannot open SCSI
driver
As far as I know, you cant have id's below 0, what's wrong here? is this a
cdrecord problem due to a change in kernel scsi or is this a kernel scsi
bug?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
