Eric,

usb audio will be made to work again, but it's
currently broken 2 ways:  usb-uhci was just broken
in 2.4.0-test9.

Besides that, the audio driver
has been broken since 2.4.0-test7 or so.
It worked in 2.4.0-test5 but not in -test7.
I've been searching for the problem but haven't
found it yet.

~Randy

> -----Original Message-----
> From: Erik Mouw [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, October 05, 2000 11:40 AM
> To: [EMAIL PROTECTED]
> Subject: usb-audio, does it work at all?
> 
> 
> Hi all,
> 
> I just got a "Target USB speaker converter", which is basically a
> USB sound card. I opened the case and found a Philips UDA1321PS
> chip, which seems to be the same chip as used in the Philips
> DSS 330 USB speakers, according to the linux-usb pages[1].
> However, if I connect it to my laptop, nothing happens. Yes, the
> USB layer sees a new device, but nothing happens, even if I have
> the audio module loaded. Does it work with the Philips USB
> speakers, or is the driver just broken?
> 
> I'm using linux-2.4.0-test9 on an Asus P6300 notebook (PII 233, 80MB
> memory, Intel BX/ZX chipset) running SuSE 6.4. USB controller is
> an Intel 82371AB PIIX4 USB and both UHCI drivers fail to do
> something useful with the sound card.
> 
> 
> Erik
> 
> [1] http://linux-usb.sourceforge.net/usb.ids , look for Philips
> 
> -- 
> J.A.K. (Erik) Mouw, Information and Communication Theory 
> Group, Department
> of Electrical Engineering, Faculty of Information Technology 
> and Systems,
> Delft University of Technology, PO BOX 5031,  2600 GA Delft, 
> The Netherlands
> Phone: +31-15-2783635  Fax: +31-15-2781843  Email: 
> [EMAIL PROTECTED]
> WWW: http://www-ict.its.tudelft.nl/~erik/
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/

Reply via email to