--test9-pre8 blows up at boot, somewhere around the ALI5X3 init.

Here's the oops, with ksymoops decode.  Copied by hand, 
hope it's correct:

ALI5X3: IDE controller on PCI buss 00 dev 78
ALI5X3: chipset revision 193
ALI5X3: bad irq (0): will probe later

Unable to handle kernel paging request at virtual address 00000010
printing eip
c0178539
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c0178397>]
EFLAGS: 00010002
eax: 00000000   ebx: 00000002   ecx: 00000000   edx: c133df3f
esi: 0000005e   edi: cbfec400   ebp: 00000000   esp: c133def8
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 2, stackpage=c133d000)
Stack: c133df3f 00000000 c020db96 00000000 0000005e c133df3f cbfec400 0000004b
       0000004a cbfec400 0000004b c133df3f 000001f0 c0258200 000003f4 00000000
       00000246 4a0001f0 c020e6fe c0258200 c0214844 cbfec400 c024ccbc 00008e00
Call Trace: [<c0107007>] [<c0108cec>] 
Code: 8b 41 10 8b 40 30 52 56 51 8b 00 ff d0 83 c4 0c 53 0d 5b 5e


ksymoops 2.3.4 on i586 2.4.0-test9pre7.  Options used
     -v ./vmlinux (specified)
     -K (specified)
     -L (specified)
     -O (specified)
     -m ./System.map (specified)

Unable to handle kernel paging request at virtual address 00000010
c0178539
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c0178397>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010002
eax: 00000000   ebx: 00000002   ecx: 00000000   edx: c133df3f
esi: 0000005e   edi: cbfec400   ebp: 00000000   esp: c133def8
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 2, stackpage=c133d000)
Stack: c133df3f 00000000 c020db96 00000000 0000005e c133df3f cbfec400 0000004b
       0000004a cbfec400 0000004b c133df3f 000001f0 c0258200 000003f4 00000000
       00000246 4a0001f0 c020e6fe c0258200 c0214844 cbfec400 c024ccbc 00008e00
Call Trace: [<c0107007>] [<c0108cec>] 
Code: 8b 41 10 8b 40 30 52 56 51 8b 00 ff d0 83 c4 0c 53 0d 5b 5e

>>EIP; c0178397 <pci_match_device+7/78>   <=====
Trace; c0107007 <init+7/110>
Trace; c0108cec <kernel_thread+28/38>
Code;  c0178397 <pci_match_device+7/78>
00000000 <_EIP>:
Code;  c0178397 <pci_match_device+7/78>   <=====
   0:   8b 41 10                  mov    0x10(%ecx),%eax   <=====
Code;  c017839a <pci_match_device+a/78>
   3:   8b 40 30                  mov    0x30(%eax),%eax
Code;  c017839d <pci_match_device+d/78>
   6:   52                        push   %edx
Code;  c017839e <pci_match_device+e/78>
   7:   56                        push   %esi
Code;  c017839f <pci_match_device+f/78>
   8:   51                        push   %ecx
Code;  c01783a0 <pci_match_device+10/78>
   9:   8b 00                     mov    (%eax),%eax
Code;  c01783a2 <pci_match_device+12/78>
   b:   ff d0                     call   *%eax
Code;  c01783a4 <pci_match_device+14/78>
   d:   83 c4 0c                  add    $0xc,%esp
Code;  c01783a7 <pci_match_device+17/78>
  10:   53                        push   %ebx
Code;  c01783a8 <pci_match_device+18/78>
  11:   0d 5b 5e 00 00            or     $0x5e5b,%eax

====================================================================

/proc/pci :

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 4).
      Master Capable.  Latency=64.  
      Non-prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 4).
      Master Capable.  Latency=64.  Min Gnt=8.
  Bus  0, device   3, function  0:
    Bridge: Acer Laboratories Inc. [ALi] M7101 PMU (rev 0).
  Bus  0, device   7, function  0:
    ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev 
195).
  Bus  0, device  10, function  0:
    Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] 
(rev 17).
      IRQ 12.
      Master Capable.  Latency=24.  
      I/O at 0xb800 [0xb87f].
      Non-prefetchable 32 bit memory at 0xd6800000 [0xd680007f].
  Bus  0, device  15, function  0:
    IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev 193).
      Master Capable.  Latency=32.  Min Gnt=2.Max Lat=4.
      I/O at 0xb400 [0xb40f].
  Bus  1, device   0, function  0:
    VGA compatible controller: ATI Technologies Inc Rage 128 RF (rev 0).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xd7800000 [0xd7803fff].

====================================================================

/proc/cpuinfo :

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 5
model           : 9
model name      : AMD-K6(tm) 3D+ Processor
stepping        : 1
cpu MHz         : 449.000148
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
sep_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 sep mtrr pge mmx 3dnow
bogomips        : 894.57

====================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/

Reply via email to