Kernel segfaults on boot with MTRRs enabled.
Kernel locks system hard. Requires hardware reset
Recompiling without MTRR support eliminates problem.
/proc/version
Linux version 2.2.18pre11 (root@shockwave) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #6 Wed Sep 27 15:25:03 EDT 2000
ver_linux
-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux shockwave 2.2.18pre11 #6 Wed Sep 27 15:25:03 EDT 2000 i686 unknown
Kernel modules 2.3.11
Gnu C egcs-2.91.66
Binutils 2.9.1.0.25
Linux C Library 2.1.3
Dynamic linker ldd: version 1.9.9
Procps 2.0.6
Mount 2.10l
Net-tools 1.55
Kbd 0.99
Sh-utils 2.0
Modules Loaded bsd_comp ppp slhc old_tulip ip_masq_raudio
ip_masq_portfw ip_masq_ftp ip_masq_autofw
/proc/cpuinfo
processor : 0
vendor_id : CyrixInstead
cpu family : 6
model : 2
model name : M II 3x Core/Bus Clock
stepping : 8
cpu MHz : 224.881
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 mtrr pge cmov mmx
bogomips : 448.92
/proc/modules
bsd_comp 3888 0 (autoclean)
ppp 20140 2 (autoclean) [bsd_comp]
slhc 4448 1 (autoclean) [ppp]
old_tulip 25464 1 (autoclean)
ip_masq_raudio 3000 0 (unused)
ip_masq_portfw 2564 2
ip_masq_ftp 2648 0 (unused)
ip_masq_autofw 2516 0 (unused)
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST51080N Rev: 0943
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: iomega Model: jaz 1GB Rev: H.72
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.1c
Type: CD-ROM ANSI SCSI revision: 02
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
