Hello! It seems as if linux 2.2.17 is calculating a strange value for my bogomips value. I thought is was supposed to be somewhere near the processor speed. Perhaps I am missing something? Have a nice day ;) Erik p.s. dmesg output attatched...
cc version 2.95.1 19990816 (release)) #8 Thu Sep 14 14:14:56 CDT 2000 Detected 99547 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 198.25 BogoMIPS Memory: 30628k/32768k available (1068k kernel code, 412k reserved, 600k data, 60k init) Dentry hash table entries: 4096 (order 3, 32k) Buffer cache hash table entries: 32768 (order 5, 128k) Page cache hash table entries: 8192 (order 3, 32k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium 75 - 200 stepping 06 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfc7f5 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 32768 bhash 32768) IPv4 over IPv4 tunneling driver early initialization of device tunl0 is deferred GRE over IPv4 tunneling driver early initialization of device gre0 is deferred NET4: Linux IPX 0.38 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. NET4: AppleTalk 0.18 for Linux NET4.0 Initializing RT netlink socket Starting kswapd v 1.5 vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 512 Unix98 ptys configured Software Watchdog Timer: 0.05, timer margin: 60 sec Real Time Clock Driver v1.09 loop: registered device at major 7 CMD640: ignored by ide_scan_pci_device() (uses own driver) ide0: buggy cmd640b interface on PCI (type1), config=0x7e ide1: serialized, secondary interface okay cmd640: drive0 timings/prefetch(on) preserved, clocks=2/3/3 cmd640: drive1 timings/prefetch(on) preserved, clocks=2/3/3 cmd640: drive2 timings/prefetch(on) preserved, clocks=2/3/3 cmd640: drive3 timings/prefetch(on) preserved, clocks=2/3/3 hda: Conner Peripherals 1080MB - CFS1081A, ATA DISK drive hdb: Conner Peripherals 420MB - CFS420A, ATA DISK drive hdc: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0) hda: Conner Peripherals 1080MB - CFS1081A, 1032MB w/0kB Cache, CHS=524/64/63 hdb: Conner Peripherals 420MB - CFS420A, 406MB w/64kB Cache, CHS=826/16/63 hdc: Conner Peripherals 1275MB - CFS1275A, 1219MB w/64kB Cache, CHS=2477/16/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PPP: version 2.3.7 (demand dialling) TCP compression code copyright 1989 Regents of the University of California PPP line discipline registered. PPP BSD Compression module registered PPP Deflate Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xfce0, IRQ 9. eth0: RealTek RTL-8029 found at 0xfce0, IRQ 9, 00:C0:F0:5B:62:4B. Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 hdc: [PTBL] [619/64/63] hdc1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 60k freed PPP BSD Compression module registered 3c507.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED]) eth1: 3c507 at 0x300, 00 60 8c 5c e4 7a, IRQ 3, external xcvr, memory 0xd0000-0xdffff. 3c507.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED]) Adding Swap: 16124k swap-space (priority -1) Adding Swap: 15620k swap-space (priority -2)
