Hello,
Hope this is an OK place to send this.
I am running on a Compaq Armada E500 laptop, and after about a days worth
of the pcmcia network card being registered, the system looses network
connectivity with the following being logged to /var/log/messages
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc2 media 8800 dma 000000a0.
Flags; bus-master 1, full 0; dirty 41821 current 41828.
Transmit list 01e0cae0 vs. c1e0cad0.
0: @c1e0ca00 length 8000002a status 8000002a
1: @c1e0ca10 length 8000002a status 8000002a
2: @c1e0ca20 length 8000002a status 8000002a
3: @c1e0ca30 length 8000002a status 8000002a
4: @c1e0ca40 length 80000051 status 80010051
5: @c1e0ca50 length 80000048 status 80010048
6: @c1e0ca60 length 80000048 status 80010048
7: @c1e0ca70 length 80000048 status 80010048
8: @c1e0ca80 length 80000042 status 80010042
9: @c1e0ca90 length 80000042 status 80010042
10: @c1e0caa0 length 80000092 status 80010092
11: @c1e0cab0 length 800000a2 status 800100a2
12: @c1e0cac0 length 800000a2 status 800100a2
13: @c1e0cad0 length 800000a2 status 800100a2
14: @c1e0cae0 length 8000002a status 8000002a
15: @c1e0caf0 length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc2 media 8820 dma 000000a0.
Flags; bus-master 1, full 1; dirty 42249 current 42259.
Transmit list 01e0caa0 vs. c1e0ca90.
0: @c1e0ca00 length 800001b7 status 800001b7
1: @c1e0ca10 length 800001b7 status 800001b7
2: @c1e0ca20 length 8000004d status 8000004d
3: @c1e0ca30 length 800001b7 status 800101b7
4: @c1e0ca40 length 80000042 status 80010042
5: @c1e0ca50 length 8000004a status 8001004a
6: @c1e0ca60 length 8000004a status 8001004a
7: @c1e0ca70 length 8000004a status 8001004a
8: @c1e0ca80 length 8000004a status 8001004a
9: @c1e0ca90 length 80000042 status 80010042
10: @c1e0caa0 length 80000042 status 80000042
11: @c1e0cab0 length 800001b7 status 800001b7
12: @c1e0cac0 length 800001b7 status 800001b7
13: @c1e0cad0 length 8000004d status 8000004d
14: @c1e0cae0 length 8000004a status 8000004a
15: @c1e0caf0 length 8000004a status 8000004a
eth0: Resetting the Tx ring pointer.
eth0: Tx Ring full, refusing to send buffer.
I am running pretty much stock Redhat 6.1 with kernel 2.2.17 and
pcmcia-cs 3.1.20
The card in question is a 3Com 3CCFE575BT
Ejecting and putting the card back in fixes the problem for roughly another
24
hours.
Upon re-inserting the card this is logged
vortex_detach(eth0)
cs: cb_disable(bus 2)
cs: cb_release(bus 2)
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5157
3c59x.c:v0.99Q 5/16/2000 Donald Becker, [EMAIL PROTECTED]
http://www.scyld.com/network/vortex.html
cs: cb_config(bus 2)
fn 0 bar 1: io 0x200-0x27f
fn 0 bar 2: mem 0x60021000-0x6002107f
fn 0 bar 3: mem 0x60020000-0x6002007f
fn 0 rom: mem 0x60000000-0x6001ffff
irq 3
cs: cb_enable(bus 2)
bridge io map 0 (flags 0x21): 0x200-0x27f
bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff
vortex_attach(device 02:00.0)
eth0: 3Com 3CCFE575BT Cyclone CardBus at 0x200, 00:50:04:9a:59:9a, IRQ 3
product code 'ZH' rev 07.1 date 11-30-99
eth0: CardBus functions mapped 60020000->c8043000.
8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
MII transceiver found at address 0, status 2809.
Enabling bus-master transmits and whole-frame receives.
Looks OK to me?
Any help would be much apreciated.
Also
If you can CC any replies to me, as I'm not on the list.
----------------------------------------------------------
Andrew Clayton
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
