Hi,
> Hi all.
>
> I'd installed the backport of the USB patch (to 2.2.16) and had the
> following problem:
>
> After a few inches of printing a graphics page (ghostscript
> output), the
> whole printing job would just hang. Only exit was switching
> the printer
> on/off and removing the print job. The printer is an HP810C
> and (I suspect)
> the problem is at the VIA chipset (VT82C586).
>
> After a few frustrating tries, I moved to kernel 2.4.0-test7,
> suspecting
> that maybe there was a problem with the backport. Results:
>
> Exactly the same print problem: hangs after 5 - 10 cm of printing a
> graphics page (text mode works ok).
Please enable all kernel log messages (Alt-SysRq-9 or
boot with: linux_image_name debug), reproduce the problem,
and send the kernel log after the printing hangs.
~Randy
> But, after installing 2.4.0, yesterday, I had two misterious
> hangs of the
> operating system - apparently nothing to do with the tasks that were
> running - they were completely different.
>
> Just in case: the printer is driven by the apsfilter, which works fine
> when using the parallel port.
>
> Thanks on beforehand!
>
> John
> --
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
