Dasoju Shashidhar schrieb: > > Dear all > > Recently we bought 4 AVM A1(v3.0) ISDN cards which we > connected to PC and then we loaded the drivers to check whether the > driver can detect the cards. In fact the card is detected and the > messages in the /var/log/messages contains the messages that are given > in the ISDN/README.Hisax file. > > They came with 6.0 meter cable, with one end going into PC > and the other end contains RJ45 plug. > > Now the problem is ):- > > We want to connect 2 PC's through a Siemens 100E exchange > which provides 16 S0 interfaces. But each S0 interface has RJ11 socket and > AVM card's cable has RJ45 plug. How can this happen and how to connect. > > Is there is someone who is using Siemens Hicom100E exchange. Hello, I think there might be some problem. Are you really shure that the Hicom uses internal S0-busses ? Many HiCom Equipment uses Up0 busses for connecting their own hardware. There are adapters available as far as I know. And as an opton the system may be equipped with S0 busses without needing an adapter. But the RJ11 connector seems to announce such problems. I don't knw exactly if this problem occurs on an 100E, but it might be possible. > > Please reply back. It is very urgent. > > Thank you > -shashi Werner ----------------------------------------------------------------------- For information on this and other Linux India mailing lists check out http://lists.linux-india.org/
