Probably. At worst, you can download the 'megaraid' driver and compile/run it. You should have boot driver floppy image in case you need it for boot and you can't find it.
Ez 2011/5/25 Hetz Ben Hamo <het...@gmail.com> > Here is the output which mentions the SAS: > > 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 > PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) > Subsystem: Hewlett-Packard Company Device 3371 > Flags: bus master, fast devsel, latency 0, IRQ 10 > I/O ports at 6000 [size=256] > Memory at c7efc000 (64-bit, non-prefetchable) [size=16K] > Memory at c7e80000 (64-bit, non-prefetchable) [size=256K] > [virtual] Expansion ROM at c2000000 [disabled] [size=512K] > Capabilities: [50] Power Management version 3 > Capabilities: [68] Express Endpoint, MSI 00 > Capabilities: [d0] Vital Product Data <?> > Capabilities: [a8] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 > Enable- > Capabilities: [c0] MSI-X: Enable- Mask- TabSize=15 > Capabilities: [100] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- > ECRC- UnsupReq- ACSVoil- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- > ECRC- UnsupReq+ ACSVoil- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ > ECRC- UnsupReq- ACSVoil- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [138] Power Budgeting <?> > > IIRC, the centos 5.5 installer should recognize it without any issues, am I > right? > > Hetz > > > 2011/5/24 Baruch Even <bar...@ev-en.org> > >> On May 24, 2011 1:57 PM, "Hetz Ben Hamo" <het...@gmail.com> wrote: >> > >> > Hi, >> > >> > I'm trying to assist someone. He has an IBM Server and he's planning to >> install CentOS 5.5 >> > >> > Part of the setup is a storage box (which he is not administrating) >> which is connected to the IBM with SAS cable. >> > >> > Are there any special instructions while doing the install to detect and >> use this SAS connected storage? (the box has currently OpenSuSE and when >> connecting the SAS cable, nothing showed up on /var/log/messages).. >> >> You are missing the sas controller driver probably. Try to do lspci to >> find the sas controller model and from there you'll need to find the driver. >> >> Baruch >> > > > -- > > *חץ בן חמו > חץ-ביז (הוסטינג) > *השכרה ואירוח של שרתים פיזיים > השכרת שרתים וירטואליים מקצועיים וגדולים במחירים *קטנים* > בקרו באתרנו בכתובת hetz.biz <http://www.hetz.biz/> ובבלוג שלנו: > blog.hetz.biz > טלפוןן: 0783333113/4/5, אימייל: sa...@hetz.biz > מסנג'ר: sa...@hetz.biz - סקייפ: heunique > > > _______________________________________________ > Linux-il mailing list > Linux-il@cs.huji.ac.il > http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il > >
_______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
