We have a file system that was built and populated before changing its acl. On this file system we created a directory with default acl and 50 users that don't belong ( all of them) to the same group we have 4 groups. One of those groups should be able to r/w/x files in each user's directory , so I believed that if I create an entry in acl for this group I'll solve the problem. The file system is mounted
/dev/ngs /ngs type gpfs rw,mtime,atime,quota=userquota;groupquota,filesetquota,dev=ngs,autostart 0 0 I tried to use also mmeditacl - command for changing acl that comes with gpfs and the result is the same. The output for mount -l is : [r...@dapsas2 user_data]$ mount -l /dev/md2 on / type ext3 (rw) [] none on /proc type proc (rw) none on /sys type sysfs (rw) none on /dev/pts type devpts (rw,gid=5,mode=620) usbfs on /proc/bus/usb type usbfs (rw) /dev/md0 on /boot type ext3 (rw) [] none on /dev/shm type tmpfs (rw) /dev/mapper/vg00-volusers on /users type ext3 (rw,usrquota,grpquota) [] /dev/mapper/vg00-volgcg on /gcg type ext3 (rw) [] /dev/mapper/vg00-voldb on /srv type ext3 (rw) [] none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) sedna:/vol/main/biousers on /biousers type nfs (rw,soft,bg,addr=132.77.4.190) sedna:/vol/main/biousers2 on /biousers2 type nfs (rw,soft,bg,addr=132.77.4.190) sedna:/vol/main/genusers on /genusers type nfs (rw,soft,bg,addr=132.77.4.190) sedna:/vol/main/mysusers on /mysusers type nfs (rw,soft,bg,addr=132.77.4.190) //ga-ps1/data on /srv/projects/next-gen-seq/ga-ps1 type cifs (ro,mand) nfsd on /proc/fs/nfsd type nfsd (rw) /dev/ngs on /ngs type gpfs (rw,mtime,quota=userquota;groupquota;filesetquota,dev=ngs,autostart) ngs001:/data/run_data on /ngs/run_data001 type nfs (rw,soft,bg,addr=132.77.4.47) [r...@dapsas2 user_data]$ mount -l[Ka [r...@dapsas2 user_data]$ pwd /ngs/user_data [r...@dapsas2 user_data]$ ls -ld [00mdrwxrwxr-x+ 50 esterf nobody 8192 Jul 13 09:30 [00;34m.[00m Ls -ld on /ngs returns drwxrwxr-x+ 14 bsgilgi bioserv 8192 Jul 11 12:21 . I created first the acl for /ngs and I checked if directories already created in this file system hav + at the end of permissions - don't have. If I create in /ngs a new directory it inherit the acl from /ngs. I created another acl for /ngs/user_data but as user belonging to bioserv group I cannot write in other users directories. Something I'm not doing wright. -----Original Message----- From: Oleg Goldshmidt [mailto:p...@goldshmidt.org] Sent: Monday, July 12, 2010 9:03 PM To: camelia Subject: Re: acl group permissions camelia <camelia.bo...@weizmann.ac.il> writes: > We tried to create acl for file system /ngs and we saw that we cannot "use" > It in our purpose so we created an extra acl for sub dir /ngs/user_data. > What we need still doesn't work. > We consulted a lot of times the acl man pages and not only and we believe > that we do what it should be done. > Why doesn't work ? Hi, It would help if you could tell us exactly what you did, including the actual sequence of qcommands (mount - or the relevant part of /etc/fstab if the mount is automatic, - setfacl, etc.) and the outcome, as in what exactly does not work, including the output of "mount -l" and of "ls -ld" on some of the problematic directories and files, including /ngs itself. It is very difficult to diagnose a generic "does not work" problem. -- Oleg Goldshmidt | p...@goldshmidt.org _______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
