David Harel <harel...@gmail.com> writes: > Hi there, > Using Gentoo (and have to configure kernel). > When I do the command - file - on kernel file I just built it says, among > other things, root_dev 0x801. > The working kernel says - root_dev 0x10. > Where is this parameter determined and since when does the kernel care where > it resides?
I don't think it is related to where the kernel resides, but to where the root filesystem resides - this is the rootfs device number - and the kernel does care, obviously. You can add this as a boot parameter with root=/dev/sda1 or sth of the kind. The root device may change (more than once) during boot. E.g., if you use initrd then the initrd root device may point to the ramdisk (/dev/ram0 or similar). Then at some point you'll want the regular root device to be engaged - the pivot_root syscall (for more info, see the pivot_root(2), pivot_root(8), rdev(8), initrd(4) man pages, the kernel Documentation, etc.) will change the root device as appropriate (/dev/sda1 or whatever). This may explain why your just-built kernel and the working kernel have different root_dev. I *think* there is a registry for device numbers in Documentation/devices.txt, if you want to find out what 0x801 or 0x10 are. Hope it helps, -- Oleg Goldshmidt | p...@goldshmidt.org _______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
