Hi, I once had a similar issue, the TDM card was badly shipped, the modules weren't the right one I thought they were.. i.e. FXS instead of FXO or the other way around, resulting in a card having FXS with another 3 FXO (or the other way) which caused Asterisk to confuse, and nothing to work properly.
I discovered this by placing NOTHING as a group, as anything can be done without the need to group them, and the problem "appeared" to have been resolved - which led me to the conclusion I was grouping things incorrectly - openned the box and noticed the mistake by the card supplier. Not sure if this is the same case as in your configuration. On Monday 28 January 2008 17:19:38 Shachar Shemesh wrote: > Hi all, > > > A while back I asked three Asterisk questions. Two of those were > successfully answered by the list members, but one remains: > > I have four internal extensions connected to a TDM400 card using four > FXS modules (channels 1-4). I also have two Bezeq lines connected to a > second TDM400 card using two FXO modules (channels 7 and 8). > > > I defined the FXO channels to belong to group 2, and defined in my > extensions.conf file that outgoing calls should be directed to Zap/g2. > When I dial out from my extension, everything is ok - I get an external > line. When I dial from a different extension, my extension rings. If I > dial out from two (neither mine) extension, the first rings my > extension, but the seconds gets an outside line as it should. > > > These symptoms would have been completely explained if Asterisk has > appropriated my extension (Zap/1) to group 2, with (seemingly) no > justification. > > > Thinking I inadvertently associated Zap/1 to group 2 by mistake, I tried > associating Zap/7 and Zap/8 to group 3 instead of two, with the > appropriate change in extensions.conf. The problem persists. > > This is the relevant part of my zapata.conf file: > > context=internal > > signalling=fxo_ks > > group=1 > > callerid="Shachar Shemesh" <201> > > channel => 1 > > > > callerid="someone" <202> > > channel => 2 > > > > callerid="someone" <203> > > channel => 3 > > > > callerid="someone" <204> > > channel => 4 > > > > context=incoming > > signalling=fxs_ks > > group=3 > > callerid=asreceived > > channel => 7 > > > > callerid=asreceived > > channel => 8 > > Any help would be greatly appreciated. > > Thanks, > Shachar > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] -- Noam Rathaus CTO [EMAIL PROTECTED] http://www.beyondsecurity.com "Know that you are safe." Beyond Security Finalist for the "Red Herring 100 Global" Awards 2007 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
