The magical AT command is:
AT+CGDCONT=1,"IP","internet";
Generally the phone number to call is:
*99***1#
Username and password are irrelevant. This information works for me at
least, connecting to Orange, using a Merlin u740 modem.
Here is my wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init5 = AT+CGDCONT=1,"IP","internet";
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB0
Dial Command = ATD
Phone = *99***1#
Password = shay
Username = shay
Regards,
shay
Gilad Ben-Yossef wrote:
eli elizur wrote:
Hi guy's,
any one ave experience with configuration of modem - air card sierra
wireless 850 ?
I do, although I don't remember much except that it's a pcmcia card
which has a USB controller, to which internal hub connected an
internal USB serial modem. You're supposed to get all that configured,
do an AT dial and talk PPP with whatever at the other end.
There's some magical AT command that you need to send it to turn on
and really work but alas I do not remember what it is.
Hope this helps,
Gilad
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
