Hey guys... I'm having the same problem with my Mustek Powermust
2000VA USB... I tried using the serial port emulated by the driver
[Cypress Semiconductor USB to Serial], but NUT wouldnt connect to it
using the mustek driver...
upsdrvctl results:
Syncing with UPS: .................Startup timer elapsed, continuing...
zero:~# ...
Failed - giving up...
dmesg:
ohci_hcd 0000:00:02.1: wakeup
usb 2-3: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.00 Gamepad [Cypress Semiconductor USB to Serial] on
usb-0000:00:02.1-3
evtest:
zero:~# ./evtest /dev/input/event1
Input driver version is 1.0.0
Input device ID: bus 0x3 vendor 0x665 product 0x5161 version 0x1
Input device name: "Cypress Semiconductor USB to Serial"
Supported events:
Event type 0 (Reset)
Event code 0 (Reset)
Event code 1 (Key)
Event code 17 (LED)
Event type 1 (Key)
Event code 304 (BtnA)
Event code 305 (BtnB)
Event code 306 (BtnC)
Event code 307 (BtnX)
Event code 308 (BtnY)
Event code 309 (BtnZ)
Event code 310 (BtnTL)
Event code 311 (BtnTR)
Event code 312 (BtnTL2)
Event code 313 (BtnTR2)
Event code 314 (BtnSelect)
Event code 315 (BtnStart)
Event code 316 (BtnMode)
Event code 317 (BtnThumbL)
Event code 318 (BtnThumbR)
Event code 319 (?)
Event code 320 (ToolPen)
Event code 321 (ToolRubber)
Event code 322 (ToolBrush)
Event code 323 (ToolPencil)
Event code 324 (ToolAirbrush)
Event code 325 (ToolFinger)
Event code 326 (ToolMouse)
Event code 327 (ToolLens)
Event code 328 (?)
Event code 329 (?)
Event code 330 (Touch)
Event code 331 (Stylus)
Event code 332 (Stylus2)
Event code 333 (?)
Event code 334 (?)
Event code 335 (?)
Event code 336 (?)
Event code 337 (?)
Event code 338 (?)
Event code 339 (?)
Event code 340 (?)
Event code 341 (?)
Event code 342 (?)
Event code 343 (?)
Event code 344 (?)
Event code 345 (?)
Event code 346 (?)
Event code 347 (?)
Event code 348 (?)
Event code 349 (?)
Event code 350 (?)
Event code 351 (?)
Event code 352 (?)
Event code 353 (?)
Event code 354 (?)
Event code 355 (?)
Event code 356 (?)
Event code 357 (?)
Event code 358 (?)
Event code 359 (?)
Event code 360 (?)
Event code 361 (?)
Event code 362 (?)
Event code 363 (?)
Event code 364 (?)
Event code 365 (?)
Event code 366 (?)
Event code 367 (?)
Event type 17 (LED)
Event code 0 (NumLock)
Event code 1 (CapsLock)
Event code 2 (ScrollLock)
Event code 3 (Compose)
Event code 4 (Kana)
Event code 5 (Sleep)
Event code 6 (Suspend)
Event code 7 (Mute)
Event code 8 (?)
Event code 9 (?)
Event code 10 (?)
Event code 11 (?)
Event code 12 (?)
Event code 13 (?)
Event code 14 (?)
Event code 15 (?)
Testing ... (interrupt to exit)
----> tried shuting down the power, no reaction.
Anyone else made some progress? Any help would be welcomed :)
Thanq
--
|
| Alex Alexander
|
\
================================================================To unsubscribe,
send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
